Removal of cement mortar remains from recycled aggregate using pre-soaking approaches

Resources, Conservation and Recycling

Volumn 50, Issue 1, 2007, Pages 82-101

  Tam, Vivian W Y ^a   Tam, C M ^b   Le, K N ^a  

^a GRIFFITH UNIVERSITY   (Australia)

^b CITY UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

Construction; Pre soaking treatment; Recycled aggregate; Recycled aggregate concrete

Indexed keywords

ABSORPTION; CEMENTS; CONCRETE AGGREGATES; MORTAR; RECYCLING; SOLID WASTES;

PRESOAKING TREATMENT; RECYCLED AGGREGATE; RECYCLED AGGREGATE CONCRETES;

WASTE TREATMENT;

CEMENT; HYDROCHLORIC ACID; PHOSPHORIC ACID; SULFURIC ACID;

ABSORPTION; CEMENTS; CONCRETE AGGREGATES; MORTAR; RECYCLING; SOLID WASTES; WASTE TREATMENT;

AGGREGATE; CEMENT; CONCRETE; MECHANICAL PROPERTY; MORTAR; POROSITY; RECYCLING; WASTE TREATMENT;

ARTICLE; ELASTICITY; INTERMETHOD COMPARISON; STRENGTH; WASTE MANAGEMENT; WATER ABSORPTION;

EID: 33847306524     PISSN: 09213449     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.resconrec.2006.05.012     Document Type: Article

References (97)

1. Acker A.V. Recycling of concrete at a precast concrete plant. Sustainable construction: use of recycled concrete aggregate. Proceedings of the international symposium, London (1998), Thomas Telford, London, UK 321-332
2. Ahmed A., and Struble L. Effects of microstructure of fracture behaviour of hardened cement paste. Microstructure of cement-based systems/bonding and interfaces in cementitious materials: symposia. Boston, MA, USA (1995) 99-108
3. Aitcin P.C., and Neville A.M. High performance concrete demystified. Concr Int 15 1 (1993) 21-26
4. Alexander MG, 1996. The effects of ageing on the interfacial zone in concrete. Interfacial transition zone in concrete: state-of-the-art report 1996, p. 150-74.
5. ASTM C293-00. Standard test method for flexural strength of concrete (using simple beam with center-point loading). American Society for Testing and Materials, United States, 2001.
6. Barra, M, Vazquez, E. Properties of concretes with recycled aggregates: influence of properties of the aggregates and their interpretation, Sustainable construction: use of recycled concrete aggregate: proceedings of the international symposium organized by the concrete technology unit, University of Dundee and held at the Department of Trade and Industry Conference Centre, London, UK on 11-12 November 1998, London: Thomas Telford; 1998. p. 19-30.
7. Benboudjema F., Meftah F., and Torrenti J.M. Interaction between drying shrinkage, creep and cracking phenomena in concrete. Eng Struct 27 2 (2005) 239-250
8. Bentz D.P., and Garboczi E.J. Simulation studies of the effects of mineral admixtures on the cement paste-aggregate interfacial zone. ACI Mater J (1991) 518-529
9. Bentz D.P., Stutzman P.E., and Garboczi E.J. Experimental and simulation studies of the interfacial zone in concrete. Cement Concr Res 22 5 (1992) 891-902
10. Bretschneider, A. The influence of recycled aggregate on the compressive strength and the elastic modulus of concrete, 2004. http://www.b-i-m.de/public/tudmassiv/decon98ruehl.htm.
11. BS 812: Part 2. Methods for determination of density. British Standards Institution, London, United Kingdom, 1995.
12. BS 812: Part 117. Methods for determination of water-soluble chloride salts. British Standards Institution, London, United Kingdom, 1988.
13. BS 882. Specification for aggregates from natural sources for concrete. British Standards Institution, London, United Kingdom, 1992.
14. BS 1881: Part 116. Method for determination of compressive strength of concrete cubes. British Standards Institution, London, United Kingdom, 1983a.
15. BS 1881 Part 121. Method for determination of static modulus of elasticity in compression. British Standard Institution, United Kingdom, 1983b.
16. Buch N., Frabizzio M.A., and Hiller J.E. Impact of coarse aggregates on transverse crack performance in jointed concrete pavements. ACI Mater J (2000) 325-332
17. Building Contractors Society of Japan. Study on recycled aggregate and recycled aggregate concrete, Building Construction Society of Japan, Committee on Disposal and Reuse of Concrete Construction Waste, Summary in Concrete Journal, 1978;16(7):18-31.
18. Building Research Establishment. Materials control to avoid waste. Build Res Establish Digest 1982;259.
19. Buildings Department, 2005. http://www.info.gov.hk/bd/english/index.html.
20. Chan A.P.C., and Ma T.Y.F. Materials wastage on commerical projects-contractor's view. Proceedings of the sixth East Asia-Pacific conference on structure engineering and construction. Taipei, Taiwan (1998) 1059-1064
21. Chan K.Y., and Li X.D. A study of the implementation of ISO 14001 environmental management systems in Hong Kong. J Environ Plan Manage 44 5 (2001) 589-601
22. Chen Z., Li H., and Wong T.C. Environmental management of urban construction projects in China. J Constr Eng Manage 126 4 (2000) 320-324
23. Chen Z., Li H., and Wong T.C. An application of bar-code system for reducing construction wastes. Automat Constr 11 5 (2002) 521-533
24. Cheung H.K. Use of recycled asphalt pavement-a practical approach to asphalt recycling. Proceedings of the materials science and technology in engineering conference-now, new and next (2003)
25. Coffee M. Cost-effective systems for solid waste management. Waterlines 17 3 (1999) 23-24
26. Construction Industry Review Committee, Construct for excellence: report of the construction industry review committee. Hong Kong Government, 2001.
27. Coventry S. The reclaimed and recycled construction materials handbook (1999), Construction Industry Research and Information Association, London
28. Environmental Protection Department, 2006. http://www.info.gov.hk/epd.
29. Environmental Transport and Works Bureau. Waste management on construction sites, 2006. http://www.wb.gov.hk.
30. Farran J. Contribution of microstructure of minerals and their bonding with Portland cement paste. Rev Mater Constr Travel Publics (1956) 490-491
31. Frondistou-Yannas S. Waste concrete as aggregate for new concrete. ACI J 5 (1977) 373-376
32. Gavilan R.M., and Bernold L.E. Source evaluation of solid waste in building construction. J Constr Eng Manage 120 3 (1994) 536-555
33. Grubl P, Ruhl M, Buhrer M. Evaluation of modulus of elasticity of concrete with recycled aggregate, 2004. http://www.b-i-m.de/public/tudmassiv/damcon99grueblruehl.htm.
34. Hansen T.C. The second RILEM state of the art report on recycled aggregates and recycled aggregate concrete. Mater Struct 1 111 (1986) 201-246
35. Hansen T.C., and Marga M. Strength of recycled concrete made from coarse and fine recycled concrete aggregates. Demolition and reuse of concrete and masonry: reuse of demolition waste (1988), Chapman and Hall, London p 605-612
36. Hansen T.C., and Narud H. Strength of recycled concrete made from crushed concrete coarse aggregate. Concr Int Design Constr 5 1 (1983) 79-83
37. Hasaba S., Kawamura M., and Toriik K. Drying shrinkage and durability of concrete made of recycled concrete aggregates. Trans Jpn Concr Inst 3 (1981) 55-60
38. Hassan K.E., Brooks J.J., and Erdman M. The use of reclaimed asphalt pavement aggregates in concrete. Waste materials in construction: WASCON 2000. Proceedings of the international conference on the science and engineering of recycling for environmental protection. Harrogate, England (2000) 121-128
39. Hendriks C.F., and Pietersen H.S. Sustainable raw materials: construction and demolition waste (2000), RILEM Publication, Cachan Cedex, France
40. Hewlett P.C. Lea's chemistry of cement and concrete (1988), Arnold, London
41. Howard Humphreys and Partners. Managing demolition and construction wastes: report of the study on the recycling of demolition and construction wastes in the UK (1994), HMSO, London
42. Ikeda T., Yamane S., and Sakamoto A. Strengths of concrete containing recycled concrete aggregate. Demolition and reuse of concrete and masonry: reuse of demolition waste (1988), Chapman and Hall, London p. 585-594
43. Jia W., Baoyuan L., Songshan X., and Zhongwei W. Improvement of paste-aggregate interface by adding silica fume. Proceedings of the eighth international congress on the chemistry of cement (1986) 460-465
44. Kakizaki M., Harada M., Soshiroda T., Ikeda T., and Kasai Y. Strength and elastic modulus of recycled aggregate concrete. Demolition and reuse of concrete and masonry: reuse of demolition waste (1988), Chapman and Hall, London p. 565-574
45. Kawano H. The state of reuse of demolished concrete in Japan. Integrated design and environmental issues in concrete technology. Proceedings of the international workshop 'rational design of concrete structures under severe conditions'. Hakodate, Japan, London: E & FN Spon (1995) 243-249
46. Keru W., and Jianhua Z. The influence of the matrix-aggregate bond on the strength and brittleness of concrete. Bonding in cementitious composites. Mater Res Soc 114 (1988) 29-34
47. Khatib J.M. Properties of concrete incorporating fine recycled aggregate. Cement Concr Res 35 4 (2005) 763-769
48. Kobayashi S., and Kawano H. Properties and usage of recycled aggregate concrete. Demolition and reuse of concrete and masonry: reuse of demolition waste (1988), Chapman and Hall, London p. 547-556
49. Kwan A.K.H., Wang Z.M., and Chan H.C. Mesoscopic study of concrete. II. Nonlinear finite element analysis. Comput Struct 70 5 (1999) 545-556
50. Lamond J.F., Campbell R.L., Campbell J.A., Giraldi A., Halczak W., Hale H.C., Jenkins N.J.T., Miller R., and Seabrook P.T. Removal and reuse of hardened concrete: reported by ACI committee 555. ACI Mater J 99 3 (2002) 300-325
51. Laufer A., and Jenkins D. Financial incentives to raise productivity. J Constr Decision, ASCE 107 (1982) 745-756
52. Li G., Xie H., and Xiong G. Transition zone studies of new-to-old concrete with different binders. Cement Concr Compos 23 4/5 (2001) 381-387
53. Lingard H., Graham P., and Smithers G. Employee perceptions of the solid waste management system operating in a large Australian contracting organization: implications for company policy implementation. J Constr Manage Econ 18 4 (2000) 383-393
54. Lo, YT. Microstructure study of the aggregate/cement paste interfacial zone of lightweight concrete, Doctor of Philosophy, Department of Building and Construction, City University of Hong Kong, 2000.
55. Masood A, Ahmad T, Arif M, Mahdi F. Waste management strategies for concrete, 2001. http://link.springer.de/link/service/journals/10022/contents/01/00034/papers.
56. McDonald B. RECON waste minimisation and environmental program. Proceedings of the CIB commission meetings and presentations. Melbourne, Australia, RMIT (1996) 14-16
57. McDonald B. Implementing a waste management plan during the construction phase of a projecT: a case study. J Constr Manage Econ 16 1 (1998) 71-78
58. McGrath C. Waste minimization in practice. Resour Conserv Recycl 32 (2001) 227-238
59. Mehta P.K., and Aitcin P.C. Microstructural basis of selection of materials and mix proportions for high strength concrete. High strength concrete, second international symposium. ACI SP-121 (1990) 265-279
60. Merchant K.A. Modern management control systems: text and cases (1997), Prentice-Hall, New Jersey
61. Mills T.M., Showalter E., and Jarman D. A cost-effective waste management plan. Cost Eng 41 3 (1999) 35-43
62. Mindess S., Young F., and Darwin D. Concrete (2003) 1-664
63. Mitsui K., Li Z., Lange D.A., and Shah S.P. Relationship between microstructure and mechanical properties of the paste-aggregate interface. ACI Mater J 91 1 (1994) 30-39
64. Mohamed A.R., and Hansen W. Micromechanical modeling of crack-aggregate interaction in concrete materials. Cement Concr Compos 21 5/6 (1999) 349-359
65. Narud, H., Recycled concrete in low-strength concrete with fly ash, Technical Report 110/82, Building Materials Laboratory, Technical University of Denmark, Lyngby, 1981.
66. Nelson B. 1001 ways to reward employees (1994), Workman, New York
67. Olorunsogo F.T., and Padayachee N. Performance of recycled aggregate concrete monitoring by durability indexes. Cement Concr Res 32 2 (2002) 179-185
68. Poon C.S. Management and recycling of demolition waste in Hong Kong. Waste Manage Res 15 6 (1997) 561-572
69. Poon C.S. Management and recycling of demolition waste in Hong Kong. Proceedings of the second international conference on solid waste management. Taipei, Taiwan (2000) 433-442
70. Poon C.S., Azhar S., and Kou S.C. Recycled aggregates for concrete applications. Proceedings of the materials science and technology in engineering conference-now, new and next (2003)
71. Poon C.S., Yu T.W., and Ng L.H. A guide for managing and minimizing building and demolition waste (2001), The Hong Kong Polytechnic University
72. Poon C.S., Yu T.W., and Ng L.H. On-site sorting of construction and demolition waste in Hong Kong. Resour Conserv Recycl 32 (2001) 157-172
73. Popovics S. Attempts to improve the bond between cement paste and aggregate. Mater Struct 20 115 (1987) 32-38
74. Ravindrarajah R.S., and Tam T.C. Properties of concrete made with crushed concrete as coarse aggregate. Mag Concr Res 37 130 (1985)
75. Reusser R.R. Recycling portland cement concrete pavement at the contractor's option. Aviation crossroads: challenges in a changing world. Proceedings of the 23rd air transport conference. Arlington, Virginia (1994) 86-91
76. Rogoff M.J., and Williams J.F. Approaches to implementing solid waste recycling facilities (1994), Noyes, Park Ridge, NJ
77. Roos DIF. Verification of the dimensioning values for concrete with recycled concrete aggregate, 2003. http://www.b-i-m.de/public/TUM/dundeeroos.htm.
78. Shen L.Y., and Tam W.Y.V. Implementing of environmental management in the Hong Kong construction industry. Int J Project Manage 20 7 (2002) 535-543
79. Skoyles E.R., and Skoyles J.R. Waste prevention on site (1987), Mitchell, London
80. Snook K., Turner A., and Ridout R. Recycling waste from the construction site (1995), Chartered Institute of Building, England
81. Tam C.M., Deng Z.M., and Zeng S.X. Evaluation of construction methods and performance for high rise public housing construction in Hong Kong. Build Environ 37 (2002) 983-991
82. Tam W.Y.V., Gao X.F., and Tam C.M. Micro-structural analysis of recycled aggregate concrete produced from two-stage mixing approach. Cement Concr Res 35 6 (2005) 1195-1203
83. Tam W.Y.V., Tam C.M., and Shen L.Y. Comparing material wastage levels beween conventional in-situ and prefabrication construction in Hong Kong. J Harbin Inst Technol 11 5 (2004) 548-551
84. Tam W.Y.V., Tam C.M., Zeng S.X., and Chan K.K. Environmental performance measurement indicators in construction. Build Environ 41 2 (2005) 164-173
85. Tasdemir M.A., Tasdemir C., Akyuz S., Jefferson A.D., Lydon F.D., and Barr B.I.G. Evaluation of strains at peak stresses in concrete: a three-phase composite model approach. Cement Concr Compos 20 4 (1998) 301-318
86. Teo M.M.M., and Loosemore M. A theory of waste bahaviour in the construction industry. J Constr Manage Econ 19 7 (2001) 741-751
87. Teranishi K., Kikuchi M., Dosho Y., and Narikawa M. Application of recycled aggregate concrete for structural concrete. Part 3. Production of recycled aggregate by real-scale plant and quality of recycled aggregate concrete. Sustainable construction: use of recycled concrete aggregate. Proceedings of the international symposium, London (1998), Thomas Telford, London, UK 143-156
88. Tomosawa F., and Noguchi T. New technology for the recycling of concrete "Japanese experience". Concrete technology for a sustainable development in the 21st century (2000), E&FN Spon, London: New York p. 274-287
89. Topcu I.B. Physical and mechanical properties of concrete produced with waste concrete. Cement Concr Res 27 12 (1997) 1817-1823
90. Torring M. Management of concrete demolition waste. Concrete technology for a sustainable development in the 21st century (2000), E&FN Spon, London: New York p. 321-331
91. Tse Y.C.R. The implementation of EMS in construction firms: case study in Hong Kong. J Environ Assess Policy Manage 3 2 (2001) 177-194
92. Wang Z.M., Kwan A.K.H., and Chan H.C. Mesoscopic study of concrete. I. Generation of random aggregate structure and finite element mesh. Comput Struct 70 5 (1999) 533-544
93. Warren R.H. Motivation and productivity in the construction industry (1989), Van Nostrand Reinhold, New York
94. Xueqan W., Dongxu L., Qinghan B., Liqun G., and Minshu T. Preliminary study of a composite process in concrete manufacture. Cement Concr Res 17 5: (1987) 709-714
95. Yang YF, Han LH. Experimental behaviour of recycled aggregate concrete filled steel tubular columns. J Constr Steel Res.
96. Yangi K., Hisaka M., and Kasai Y. Physical properties of recycled concrete using recycled coarse aggregate made of concrete with finishing materials. Demolition and reuse of concrete and masonry: guidelines for demolition and reuse of concrete and masonry. Proceedings of the third international RILEM symposium on demolition and reuse of concrete masonry (1993), E&FN Spon, London 379-390
97. Zeng S.X., Tam C.M., Deng Z.M., and Tam W.Y.V. ISO 14000 and the construction industry: case study in China. ASCE J Manage Eng 19 3 (2002) 107-115