Dilution-based emissions sampling from stationary sources: Part 1 - Compact sampler methodology and performance

Journal of the Air and Waste Management Association

Volumn 57, Issue 1, 2007, Pages 65-78

  England, Glenn C ^a   Watson, John G ^b   Chow, Judith C ^b   Zielinska, Barbara ^b   Chang, M C Oliver ^c   Loos, Karl R ^d   Hidy, George M ^e  

^a GE ENERGY   (United States)

^b DESERT RESEARCH INSTITUTE   (United States)

^c CALIFORNIA AIR RESOURCES BOARD   (United States)

^d SHELL GLOBAL SOLUTIONS INTERNATIONAL B V   (United States)

^e Envair/Aerochem   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

OXYGEN;

AIR POLLUTANT; AIR POLLUTION; ARTICLE; ENVIRONMENTAL MONITORING; EVALUATION; INDUSTRIAL WASTE; METHODOLOGY; TRANSDUCER;

AIR POLLUTANTS, OCCUPATIONAL; AIR POLLUTION; ENVIRONMENTAL MONITORING; INDUSTRIAL WASTE; OXYGEN; TRANSDUCERS;

EID: 33847298163     PISSN: 10473289     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (41)

1. U.S. Environmental Protection Agency. Compilation of Air Pollution Emission Factors. Report AP-42. Internet Edition. Office of Research and Development: Research Triangle Park, NC, 2004; available at: http://www.ehso.com/Air_AP_42.htm (accessed 2004).
2. National Research Council. Research Priorities for Airborne Particulate Matter, Vol. 3. National Academy Press: Washington, DC, 2001; pp 5-6.
3. DeWees, W.G.; Steinsberger, K.C. Test Report: Method Development and Evaluation of Draft Protocol for Measurement of Condensible Particulate Emissions; EPA 450/4-90-012; U.S. Environmental Protection Agency: Research Triangle Park, NC, 1990.
4. Filadelfia, E.J.; McDannel, M.D. Evaluation of False Positive Interferences Associated with the Use of EPA Method 202. In Proceedings of the 89th Annual Conference & Exhibition, A&WMA, Pittsburgh, PA, June 23, 1996.
5. Holder, T.E.; Goshaw, D.G.; Richards, J.R. Artifact Formation in Method 202 Sampling Trains Used to Measure Condensible Particulate Matter Emissions from Portland Cement Kilns, Paper 451. In Proceedings of the 94th Annual Conference & Exhibition, A&WMA, Pittsburgh, PA, June 23, 2001.
6. Wien, S.E.; England, G.C.; Loos, K.R.; Ritter, K. Investigation of Artifacts in Condensable Particulate Measurements for Stationary Combustion Sources; In Proceedings of the 94th Annual Conference & Exhibition, A&WMA: Pittsburgh, PA, 2001; Paper 536.
7. Chang, M.; England, G. Update: Critical Review of Source Sampling and Analysis Methodologies for Characterizing Organic Aerosol and Fine Particulate Source Emission Profiles; Prepared for the U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA; Gas Research Institute: Des Plains, IE; and the American Petroleum Institute: Washington, DC, 2004.
8. 10 by Dilution Sampling (Constant Sampling Rate Procedures); Report CTM-039; U.S. Environmental Protection Agency: Research Triangle Park, NC, 2003.
9. Houck, J.; Cooper, J.; Larson, E. Dilution Sampling for Chemical Receptor Source Fingerprinting. Presented at the 75th Annual Meeting Air Pollution Control Association, New Orleans, LA, 1998.
10. Hildemann, L.; Cass, G.; Markowski, G. A Dilution Stack Sampler for Organic Aerosol Emissions: Designs, Characterization and Field Tests; Aerosol Sci. Technol. 1989, 10, 193-204.
11. England, G.C. Development of Fine Particulate Emission Factors and Speciation Profiles for Oil- and Gas-Fired Combustion Systems; Report 04-05; NYSERDA: Albany, NY, 2004.
12. Chang, M.-CO.; England, G.C. Development of Fine Particulate Emission Factors and Speciation Profiles for Oil and Gas-Fired Combustion Systems; Other Report: Pilot Scale Dilution Sampler Design and Validation Tests (Laboratory Study); unpublished report prepared for the U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA; The Gas Research Institute: Des Plains, IL; and the American Petroleum Institute: Washington, DC, 2004.
13. Chow, J.C.; Watson, J.G.; Kuhns, H.; Etyemezian, V.; Lowenthal, D.; Crow, D.; Kohl, S.; Engelbrecht, J.; Green, M. Source Profiles for Industrial, Mobile and Area Sources in the Big Bend Regional Aerosol Visibility and Observational Study; Chemosphere 2004, 54, 185-208.
14. England, G.C.; Watson, J.C.; Chow, J.C.; Zielinska, B.; Chang, M.O.; Loos, K.R.; Hidy, G.M. Dilution-Based Emissions Sampling from Stationary Sources: Part 2 - Gas-Fired Combustors Compared with Other Fuel-Fired Systems; J. Air & Waste Manage. Assoc. 2007, 57, 79-93.
15. Myers, R.E.; Logan, T. Progress on Developing a Federal Reference PM fine Source Test Method; unpublished report, U.S. Environmental Protection Agency: Research Triangle Park, NC, 2003; available at www.epa.gov/ttnchiel/conference/eill/pm/invers.pdf (accessed 2006).
16. Linder, G.; Wall, S. Comparison of PAH Emissions Determined by ARB Method 2429 and a Dilution Sampling (S) Method; unpublished presentation to Engineering Foundation Conference on Stationary Source Sampling and Analysis of Air Pollutants XIX: San Diego, CA, 1995.
17. Lipsky, E.; Robinson, A.S. Design and Evaluation of a Portable Dilution Sampling System for Measuring Fine Particle Emissions from Combustion Systems; Aerosol Sci. Technol. 2005, 39, 542-553.
18. Lee, S.; He, I.; Herage, T.; Young, B. Fine Particulate Matter Emission Research at CANMET Energy Technology Centre; J. Air & Waste Manage. Assoc.; 2003, 51, 1568-1578.
19. 2.5 Emissions from Pulp and Paper Mill Combustion Sources Using a Dilution Tunnel Sampler. Presented at TAPPI International Environmental Conference, Portland, OR, Technical Association of the Pulp and Paper Industry: Atlanta, GA, May 2003.
20. 2.5 Stack Emission Factors for Kraft Mill Smelt Dissolving Tanks and Lime Kilns with Weight Scrubbers; Presented at the PAPTAC Conference, Harrison Springs, British Columbia Pulp and Paper Technical Association of Canada, Montreal, Quebec, Canada, May 2003.
21. England, G.C.; McGrath, T. Development of Fine Particulate Emission Factors and Speciation Profiles for Oil and Gas Fired Combustion Systems. Topical Report: Fine Particulate Test Protocol. Prepared for the U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA; the Gas Research Institute: Des Plains, IL; and the American Petroleum Institute: Washington, DC, 2004.
22. U.S. Environmental Protection Agency. Method 5-Determination of Particulate Matter Emissions from Stationary Sources. Code of Federal Regulations 1996, Title 40, Part 60, Appendix A; available at: http://www.epa.gov/ttn/emc/progate.html (accessed 2004).
23. American Petroleum Institute. Characterization of Fine Particulate Emission Factors and Speciation Profiles from Stationary Petroleum Industry Combustion Sources; Publication 4703; American Petroleum Institute: Washington, DC, 2001.
24. American Petroleum Institute. Characterization of Fine Particulate Emission Factors and Speciation Profiles from Stationary Petroleum Industry Combustion Sources; Publication 4704; American Petroleum Institute: Washington, DC, 2001.
25. American Petroleum Institute. Characterization of Fine Particulate Emission Factors from Stationary Petroleum Industry Combustion Sources; Publication 4712; American Petroleum Institute: Washington, DC, 2001.
26. Wien, S.; England, G.; Chang, M. Development of Fine Particulate Emission Factors and Speciation Profiles for Oil and Gas Fired Combustion Systems. Topical Report: Test Results for a Gas-Fired Process Heater (Site Alpha); Prepared for the U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA; the Gas Research Institute: Des Plains, IL; and the American Petroleum Institute: Washington, DC, 2003.
27. Wien, S., England, G.; Chang, M. Development of Fine Particulate Emission Factors and Speciation Profiles for Oil and Gas Fired Combustion Systems. Topical Report: Test Results for a Combined Cycle Power Plant with Supplementary Firing, Oxidation Catalyst and SCR at Site Bravo; Prepared for the U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA; the Gas Research Institute: Des Plains, IL; and the American Petroleum Institute: Washington, DC, 2004.
28. Wien, S., England, G.; Chang, M. Development of Fine Particulate Emission Factors and Speciation Profiles for Oil and Gas Fired Combustion Systems. Topical Report: Test Results for a Gas-Fired Process Heater with Selective Catalytic Reduction (Site Charlie); Prepared for the U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA; the Gas Research Institute: Des Plains, IL; and the American Petroleum Institute: Washington, DC, 2003.
29. Wien, S., England, G.; Chang, M. Development of Fine Particulate Emission Factors and Speciation Profiles for Oil and Gas Fired Combustion Systems. Topical Report: Test Results for a Dual Fuel-Fired Commercial Boiler at Site Delta; Prepared for the U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA; the Gas Research Institute: Des Plains, IL; and the American Petroleum Institute: Washington, DC, 2004.
30. England, G.C.; Wien, S.; McGrath, T.; Hernandez, D. Development of Fine Particulate Emission Factors and Speciation Profiles for Oil and Gas Fired Combustion Systems. Topical Report: Test Results for a Combined Cycle Power Plant with Oxidation Catalyst and SCR at Site Echo; Prepared for the U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA; the Gas Research Institute: Des Plains, IL; and the American Petroleum Institute: Washington, DC, 2004.
31. Hernandez, D.; Nguyen, Q.; England, G.C. Development of Fine Particulate Emission Factors and Speciation Profiles for Oil and Gas Fired Combustion Systems. Topical Report: Test Results for a Diesel-Fired Compression Ignition Reciprocating Engine with a Diesel Particulate Filter at Site Foxtrot; Prepared for the U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA; the Gas Research Institute: Des Plains, IL; and the American Petroleum Institute: Washington, DC, 2004.
32. Chow, J.C.; Watson, J.G.; Pritchett, L.C.; Pierson, W.R.; Frazier, C.A.; Prucell, R.G. The DRI Thermal/Optical Reflectance Carbon Analysis System: Description, Evaluation and Applications, in U.S. Air Quality Studies; Atmos. Environ. 1993, 27A, 1185-1201.
33. U S. Environmental Protection Agency. Method 201A-Determination of PM10 Emissions (Constant Sampling Rate Procedure). Code of Federal Regulations 1996, Title 40, Part 51, Appendix M; available at: http://www.epa.gov/ttn/emc/promgate.html (accessed 2004).
34. 2.5 Emissions (Constant Sampling Rate Procedures); Office of Air Quality Planning and Standards; Research Triangle Park, NC, 1999; available at: http://www.epa.gov/ttn/emc/ctm/html (accessed 2004).
35. U.S. Environmental Protection Agency. Method 202-Determination of Condensable Particulate Emissions from Stationary Sources. Code of Federal Regulations 1996, Title 40, Part 51, Appendix M; available at: http://www.epa.gov/ttn/emc/promgate.html (accessed 2004).
36. U.S. Environmental Protection Agency. Method 301 - Field Validation of Pollutant Measurement Methods from Various Waste Media. Code of Federal Regulations 1992, Title 40, Part 63, Appendix A; available at: http://www.epa/ttn/eme/promgate.html (accessed 2004).
37. Corio, L.A.; Sherwell, J. In-Stack Condensible Particulate Matter Measurements and Issues; J. Air & Waste. Manage. Assoc. 2000, 50, 207-218.
38. Mazurek, M; Hildemann, L.; Cass, G.; Simoneit, B.; Rogge, W. Methods of Analysis for Complex Organic Aerosol Mixtures from Urban Emission Sources of Particulate Carbon; In Sampling and Analysis of Airborne Pollutants; Winegar, E. and Keith, L., Eds.; Lewis Publishers: Boca Raton, FL, 1993.
39. Hildemann, L.; Markowski, G.; Cass, G. Chemical Composition of Emissions from Urban Sources of Fine Organic Aerosol; Environ. Sci. Technol. 1991, 25, 9-28.
40. Kittelson, D.; Watts, W.; Johnson, J. Diesel Aerosol Sampling Methodology-CRC E-43; Final Report; Coordinating Research Council: Alpharetta, GA, 2002.
41. International Standards Organization. Reciprocating Internal Combustion Engines-Exhaust Emission Measurement of Gaseous and Particulate Exhaust Emissions; ISO 8178-1 and 8178-2; International Standards Organization: Geneva, Switzerland, 1996.