Chemical reactivity of heat-treated wood

Wood Science and Technology

Volumn 41, Issue 2, 2007, Pages 157-168

  Nguila Inari, G ^a   Petrissans, M ^a   Gerardin, P ^a  

^a Ecole Nationale Supérieure des Technologies et Industries du Bois   (France)

Author keywords

[No Author keywords available]

Indexed keywords

CARBOXYLIC ACIDS; DELIGNIFICATION; HEAT TREATMENT; LIGNIN; REACTION KINETICS;

ACIDIC HYDROLYSIS; BEECH SAWDUST; INFRARED ABSORPTION;

WOOD;

CARBOXYLIC ACIDS; DELIGNIFICATION; FAGUS; HEAT TREATMENT; LIGNINS; REACTION KINETICS;

FAGUS;

EID: 33846986825     PISSN: 00437719     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00226-006-0092-7     Document Type: Article

References (34)

1. Banks WB, Din RH, Owen N (1995) Fibre activation and subsequent copolymerisation. Holzf-orschung 49:104-108
2. Cardias Williams F, Hale MD (2003) The resistance of wood chemically modified with isocyanates: the role of moisture content in decay suppression. Int Biodeterior Biodegrad 52:215-221
3. Chang H, Chang S (2002) Moisture excluding efficiency and dimensional stability of wood improved by acylation. Bioresour Technol 85:201-204
4. Dawson BSW, Franich RA, Kroese HW, Steward D (1999) Reactivity of radiate pine sapwood towards carboxylic acid anhydrides. Holzforschung 53:195-198
5. Efanov MV (2001) Transformations of aspen wood and its principal components by O-acylation. Chem Nat Compd 37(5):482-485
6. Ellis WD, Rowell RM (1984) Reaction of isocyanates with southern pine wood to improve dimensional stability and decay resistance. Wood Fiber Sci 16(3):349-356
7. Frihart CR (2005) Wood adhesion and adhesive. In: Rowell RM (ed) Handbook of wood chemistry and wood composites, pp 257-260. ISBN 0-8493-1588-3
8. Gauthier R, Joly C, Coupas AC, Gauthier H, Escoubes M (1998) Interfaces in polyolefln/cellulosic fiber composites: chemical coupling, morphology, correlation with adhesion and aging in moisture. Polym Compos 19(3):287-300
9. Geay M, Marchetti V, Clément A, Loubinoux B, Gérardin P (2000) Decontamination of synthetic solutions containing heavy metals using chemically modified sawdust bearing polyacrylic acid chains. J Wood Sci 46(4):331-336
10. Gosselink RJA, Krosse AMA, van der Putten JC, van der Kolk JC, de Klerk-Engels B, van Dam JEG (2004) Wood preservation by low-temperature carbonisation. Ind Crops Prod 19:3-12
11. Hakkou M, Pétrissans M, Zoulalian A, Gérardin P (2005) Investigation of wood wettability changes during heat treatment on the basis of chemical analysis. Polym Degrad Stabil 89:1-5
12. Hill CAS, Cetin NS (1999) Surface activation of wood for grafting polymerisation. Int J Adhes 20:71-76
13. Hill CAS, Jones D, Strickland G, Cetin NS (1998) Kinetic and mechanistic aspects of the acetylation of wood with acetic anhydride. Holzforschung 52(6):623-629
14. Kalnins MA (1982) Chemical modification of wood for improved decay resistance. Wood Sci 13(4):202-208
15. Kamdem DP, Pizzi A, Jermannaud A (2002) Durability of heat-treated wood. Holz Roh Werkst 60:1-6
16. Lu JZ, Wu Q, McNabb HS Jr (2000) Chemical coupling in wood fiber and polymer composites: a review of coupling agents and treatments. Wood Fiber Sci 32(1):88-104
17. Marchetti V, Clément A, Gérardin P, Loubinoux B (2000) Synthesis and use of esterified sawdusts bearing carboxyl group for removal cadmium(II) from water. Wood Sci Technol 34:167-173
18. Militz H (2002) Thermal treatment of wood: European processes and their background. The International Research Group on Wood Preservation, Document no. IRG/WP 02-40241
19. Nuopponen M, Vuorinen T, Jasma S, Viitaniemi P (2004) Thermal modifications in softwood studied by FT-IR and UV resonance Raman spectroscopies. J Wood Chem Technol 24(1):13-26
20. Pandey KK (1999) A study of chemical structure of soft and hardwood and wood polymers by FTIR spectroscopy. J Appl Polym Sci 71:1969-1975
21. Papadopoulos AN, Hill CAS, Traboulay E, Hague JRB (2002) Isocyanate resins for particle board: PMDI vs EMDI. Holz Roh Werkst 60:81-83
22. Patzelt M, Stingl R, Teischinger A (2002) Termische Modifikation von Holz und deren Einfluβ auf ausgewählte Holzeigenschaften. In: Modifiziertes Holz Eigenschaften und Märkte, Lignovisionen Band 3, 101-149. ISBN 1681-2808
23. Petrissans M, Gérardin P, Elbakali D, Serraj M (2003) Wettability of heat-treated wood. Holzforschung 57:301-307
24. Quillin DT, Caulfield DF, Koutsky JA (1992) Cellulose/polypropylene composites: the use of AKD and ASA sizes as compatibilizers. Int J Polym Mater 17:215-227
25. Quinney RF, Banks WB (1995) The activation of wood fibre for thermoplastic coupling, the reaction of wood with a potential coupling agent. J Wood Chem Technol 15(4):529-544
26. Rowell RM (1980) Distribution of reacted chemicals in southern pine modified with methyl isocyanate. Wood Sci 13(2):102-110
27. Rowell RM (1982) Distribution of acetyl groups in southern pine reacted with acetic anhydride. Wood Sci 15(2):172-1.82
28. Rowell RM, Simonson R, Hess S, Plackett DV, Cronshaw D, Dunningham E (1994) Acetyl distribution in acetylated whole wood and reactivity of isolated wood cell-wall components to acetic anhydride. Wood Fiber Sci 26(1): 11-18
29. Rozman HD, Kumar RN, Abdul Khalil HPS, Abusamah A, Abu R (1997) Chemical modification of wood with maleic anhydride and subsequent copolymerisation with diallyl phthalate. J Wood Chem Technol 17(4):419-433
30. Sivonen H, Maunu SL, Sundholm F, Jämsa S, Viitaniemi P (2002) Magnetic resonance studies of thermally modified wood. Holzforschung 56:648-654
31. Stefke B, Hinterstoisser B (2002) Acetylierung von Holz. In: Lignovisionen: Modifiziertes olz Eigenschaften und Märkte, Modified wood properties and markets. Holzwirtschaft an der Universität für Bodenkultur, 25-55. ISSN 1681-2808
32. Tjeerdsma BF, Boonstra M, Pizzi A, Tekely P, Militz H (1998) Characterisation of thermally modified wood: molecular reasons for wood performance improvement. Holz Roh Werkst 56:149-153
33. Weiland JJ, Guyonnet R (2003) Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz Roh Werkst 61:216-220
34. 13C CPMAS NMR. Carbohydr Polym 58:461-456