Evaluation of heat transfer coefficient in gas-solid fluidized beds using cluster-based approach

Powder Technology

Volumn 172, Issue 1, 2007, Pages 19-26

  Karimipour, Shayan ^a   Zarghami, Reza ^a   Mostoufi, Navid ^a   Sotudeh Gharebagh, Rahmat ^a  

^a UNIVERSITY OF TEHRAN   (Iran)

Author keywords

Cluster based approach; Fluidized bed; Heat transfer coefficient; Temperature penetration depth

Indexed keywords

HEAT FLUX; HEAT TRANSFER COEFFICIENTS; NUMERICAL METHODS;

CLUSTER BASED APPROACH; HEAT BALANCE EQUATION; TEMPERATURE PENETRATION DEPTH;

FLUIDIZED BEDS;

FLUIDIZED BEDS; HEAT FLUX; HEAT TRANSFER COEFFICIENTS; NUMERICAL METHODS;

ARTICLE; CLUSTER ANALYSIS; ENERGY BALANCE; EVALUATION; FLOW; FLUIDIZED BED; HEAT ACCLIMATIZATION; HEAT EXCHANGE; HEAT TRANSFER; PREDICTION; TEMPERATURE;

EID: 33846959183     PISSN: 00325910     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.powtec.2006.10.037     Document Type: Article

References (29)

1. Ziegler E.N., Koppel L.B., and Brazelton W.T. Effect of solid thermal properties on heat transfer to gas fluidized beds. Industrial and Engineering Chemistry Fundamentals 3 (1964) 324-328
2. Yamazaki R., and Jimbo G. Heat transfer between fluidized beds and heated surfaces. Journal of Chemical Engineering of Japan 3 1 (1970) 44-49
3. Sekthira A., Lee Y.Y., and Genetti W.E. Heat transfer in a circulating fluidized bed. Proceeding of the Twenty Fifth International Heat Transfer Conference, Houston, Texas (July 1988) 24-27
4. Botteril J.S.M., and Williams J.R. The mechanism of heat transfer to gas fluidized beds. Transactions of the Institution of Chemical Engineers 41 (1963) 217-230
5. Wu R., Grace J., Lim C., and Brereton C. Suspension-to-surface heat transfer in a circulating-fluidized-bed combustor. AIChE Journal 35 10 (1989) 1685-1691
6. Mostoufi N., and Chaouki J. Flow structure of the solids in gas-solid fluidized beds. Chemical Engineering Science 59 (2004) 4217-4227
7. Noymer P.D., and Glicksman L.R. Cluster motion and particle convective heat transfer at the wall of a circulating fluidized bed. International Journal of Heat and Mass Transfer 41 1 (1998) 147-158
8. Noymer P.D., and Glicksman L.R. Near-wall hydrodynamics in a scale-model circulating fluidized bed. International Journal of Heat and Mass Transfer 42 (1999) 1389-1403
9. Mickley H.S., and Fairbanks D.F. Mechanism of heat transfer to fluidized beds. AIChE Journal 1 (1955) 374-384
10. Yusuf R., Melaaen M., and Mathisen V. Convective heat and mass transfer modeling in gas fluidized beds. Chemical Engineering Technology 28 1 (2005) 13-24
11. Baskakov A.P., Berg B.V., Vitt O.K., Filippovsky N.F., Kirakosyan V.A., Goldobin J.M., and Maskaev V.K. Heat transfer to objects immersed in fluidized beds. Powder Technology 8 (1973) 273-282
12. Koppel L.B., Patel R.D., and Holmes J.T. Statistical models for surface renewal in heat and mass transfer: part 4. Wall to fluidized bed heat transfer coefficients. AIChE Journal 16 (1970) 456-464
13. Brown R.C., and Overmann S.P. The influence of particle thermal time constants on convection coefficients in bubbling fluidized beds. Powder Technology 98 (1998) 13-20
14. Rhodes M., and Geldart D. Measurement of axial solid flux variation in the riser of a circulating fluidized bed. Circulating Fluidized Bed technology vol. II (1988), Pergamon Press, Oxford 154-164
15. Horio M., Morishita K., Tachibana O., and Murata N. Solid distribution and movement in circulating fluidized bed. Circulating Fluidized Bed Technology vol. II (1988), Pergamon Press, Oxford 147-154
16. Wu R., Lim J., and Grace J.R. The measurement of local instantaneous heat transfer coefficients in circulating fluidized bed. Canadian Journal of Chemical Engineering 67 (1989) 301-307
17. Horio M., and Kuroki H. Three-dimensional flow visualization of dilutely dispersed solids in bubbling and circulating fluidized beds. Chemical Engineering Science 15 49 (1994) 2413-2421
18. Arpaci V.S. Conduction Heat Transfer, First Ed. (1966), Addison-Wesly 76-82
19. X.T. Yan, On the penetration depth in fourier heat conduction, 8th IAA/ASME Joint Thermophysics and Heat Transfer Conference, St. Louis, Missouri, June 2002, AIAA-2002-2881.
20. Dittus F.W., and Boelter L.M.K. Heat transfer in automobile radiators of the tubular type. Univ. Calif. (Berkley) Pub. Eng. vol. 13 (1930) 443-461
21. Sellars J.R., Tribus M., and Klein J.S. Heat transfer to laminar flows in round tube or flat conduit. The Graetz Problem Extended. Trans. ASME vol. 78 (1956) 441-448
22. Gelperin N.I., and Einstein V.G. Heat transfer in fluidized beds. In: Davidson J.F., and Harrison D. (Eds). Fluidization (1971), Academic Press, New York
23. Lints M.C., and Glicksman L.R. Parameters governing particle to wall heat transfer in a circulating fluidized bed. Circulating Fluidized Bed Technology IV: Proceeding of Fourth International Circulating Fluidized Beds Conference (1994), AIChE, New York 297-304
24. Basu P. Heat transfer in high temperature fast fluidized beds. Chemical Engineering Science 45 10 (1990) 3123-3136
25. Bearg A., Klassen J., and Gisher P.E. Heat transfer in fluidized solids bed. Canadian Journal of Research 28 8 (1950) 287-307
26. Gupta A.V.S.S.K.S., and Nag P.K. Wall-to-bed heat transfer behavior in a pressurized circulating fluidized beds. International Journal of Heat and Mass Transfer 45 (2002) 3429-3436
27. Fox W.B., Grewal N.S., and Moen D.A. Wall-to-bed heat transfer in circulating fluidized beds. International Communications in Heat and Mass Transfer 26 4 (1999) 499-508
28. Li H.S., Wang Y.J., and Yang J.G. Local instantaneous temperature and time averaged heat transfer coefficient in the bottom zone of a circulating fluidized bed. International Journal of Energy Research 28 (2004) 433-448
29. Reddy B.V., and Nag P.K. Axial and radial heat transfer studies in a circulating fluidized bed. International Journal of Energy Research 21 (1997) 1109-1122