Technology and research developments in powder mixed electric discharge machining (PMEDM)

Journal of Materials Processing Technology

Volumn 184, Issue 1-3, 2007, Pages 32-41

  Kansal, H K ^a   Singh, Sehijpal ^b   Kumar, Pradeep ^c  

^a SANT LONGOWAL INSTITUTE OF ENGINEERING AND TECHNOLOGY   (India)

^b GURU NANAK DEV ENGINEERING COLLEGE   (India)

^c INDIAN INSTITUTE OF TECHNOLOGY ROORKEE   (India)

Author keywords

Electric discharge machining; Material removal rate; Surface roughness; Tool wear rate

Indexed keywords

CORROSION RESISTANCE; DIELECTRIC LIQUIDS; ELECTRIC CONDUCTIVITY; ELECTRIC INSULATION; POWDER METALLURGY; RESEARCH AND DEVELOPMENT MANAGEMENT; SURFACE ROUGHNESS; WEAR RESISTANCE;

MATERIAL REMOVAL RATE (MRR); POWDER MIXED ELECTRIC DISCHARGE MACHINING (PMEDM); SPARK GAP; TOOL WEAR RATE;

ELECTRIC DISCHARGE MACHINING;

EID: 33846799259     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2006.10.046     Document Type: Article

References (33)

1. Abu Zeid O.A. On the effect of electro-discharge machining parameters on the fatigue life of AISI D6 tool steel. J. Mater. Process. Technol. 68 1 (1997) 27-32
2. Luo Y.F. The dependence of interspace discharge transitivity upon the gap debris in precision electro-discharge machining. J. Mater. Process. Technol. 68 (1997) 127-131
3. Zhao W.S., Meng Q.G., and Wang Z.L. The application of research on powder mixed EDM in rough machining. J. Mater. Process. Technol. 129 (2002) 30-33
4. Tzeng Y.F., and Lee C.Y. Effects of powder characteristics on electro discharge machining efficiency. Int. J. Adv. Manuf. Technol. 17 (2001) 586-592
5. Narumiya H., Mohri N., Saito N., Otake H., Tsnekawa Y., Takawashi T., and Kobayashi K. EDM by powder suspended working fluid. Proceedings of 9th ISEM (1989) 5-8
6. Mohri N., Saito N., and Higashi M.A. A new process of finish machining on free surface by EDM methods. Annals CIRP 40 1 (1991) 207-210
7. Wong Y.S., Lim L.C., Rahuman I., and Tee W.M. Near-mirror-finish phenomenon in EDM using powder-mixed dielectric. Int. J. Adv. Manuf. Technol. 79 (1998) 30-40
8. Uno Y., and Okada A. Surface generation mechanism in electrical discharge machining with silicon powder mixed fluid. Int. J. Elec. Mach. 2 (1997) 13-18
9. Uno Y., Okada A., Hayashi Y., and Tabuchi Y. Surface integrity in EDM of aluminum bronze with nickel powder mixed fluid. J. Jpn. Soc. Elec. Mach. Eng. 32 70 (1998) 24-31 (in Japanese)
10. Erden A., and Bilgin S. Role of impurities in electric discharge machining. Proceedings of 21st International Machine Tool Design and Research Conference (1980), Macmillan, London 345-350
11. Jeswani M.L. Effects of the addition of graphite powder to kerosene used as the dielectric fluid in electrical discharge machining. Wear 70 (1981) 133-139
12. Furutani K., Saneto A., Takezawa H., Mohri N., and Miyake H. Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid. Precis. Eng. 25 (2001) 138-144
13. Mohri N., Tsukamoto J., and Fujino M. Mirror-like finishing by EDM. Proceedings of the 25th International Symposium on Machine Tool Design and Research. UK (1985) 329-336
14. Mohri N., Tsukamoto J., and Fujino M. Surface modification by EDM-an innovation in EDM with semi-conductive electrodes. Proceedings of Winter Annual Meet ASME, vol. 34 (1988) 21-30
15. Kobayashi K., Magara T., Ozaki Y., and Yatomi T. The present and future developments of electrical discharge machining. Proceedings of 2nd International Conference on Die and Mould Technology. Singapore (1992) 35-47
16. Yan B.H., and Chen S.L. Effects of dielectric with suspended aluminum powder on EDM. J. Chin. Soc. Mech. Eng. 14 3 (1993) 307-312
17. Yan B.H., and Chen S.L. Characteristics of SKD11 by complex process of electric discharge machining using liquid suspended with aluminum powder. J. Jpn. Inst. Light Met. 58 9 (1994) 1067-1072
18. Yan B.H., and Chen S.L. Effect of ultrasonic vibration on electrical discharge machining characteristics of Ti-6Al-4V alloy. J. Jpn. Inst. Light Met. 44 5 (1994) 281-285
19. Ming Q.Y., and He L.Y. Powder-suspension dielectric fluid for EDM. J. Mater. Process. Technol. 52 (1995) 44-54
20. Yu C.P., Chen W.C., Chang S.W., and Chang C.C. Effects of the concentration of suspended aluminum powder in dielectric fluid on EDM of carbide of tungsten's. Proceedings of the 13th Conference of Chinese Society of Mechanical Engineers. Taiwan (1996) 445-450
21. Okada A., Uno Y., and Hirao K. Formation of hard layer by EDM with carbon powder mixed fluid using titanium electrode. Proceedings of 5th International Conference on Progress of Machining Technology (2000) 464-469
22. Wang C.H., Lin Y.C., Yan B.H., and Huang F.Y. Effect of characteristics of added powder on electric discharge machining. J. Jpn. Inst. Light Met. 42 12 (2001) 2597-2604
23. Mohri N., et al. A new process of additive and removal machining by EDM with a thin electrode. Annals CIRP 40 1 (2000) 123-126
24. Han-Ming Chow, Biing-Hwa Yan*, Fuang-Yuan Huang, Jung-Cherng Hung, Study of added powder in kerosene for the micro-slit machining of titanium alloy using electro-discharge machining, J. Mater. Process. Technol. 101 (2000) 95-103.
25. Furutani K., and Shiraki K. Deposition of lubricant layer during finishing process by electrical discharge machining with molybdenum disulphide powder suspended in working fluid. JSME/ASME International Conference on Materials and Processing (2002) 468-473
26. Simao J., et al. Work piece surface modification using electrical discharge machining. Int. J. Mach. Tools Manuf. 43 (2003) 121-128
27. Yih-fong Tzeng, Fu-chen Chen, A simple approach for robust design of high-speed electrical-discharge machining technology, Int. J. Adv. Manuf. Technol. 43 (2003) 217-227.
28. Pecas P., and Henriques E.A. Influence of silicon powder mixed dielectric on conventional electrical discharge machining. Int. J. Mach. Tools Manuf. 43 (2003) 1465-1471
29. Kunieda M., and Yanatori K. Study on debris movement in EDM gap. Int. J. Elec. Mach. 2 (1997) 43-49
30. Schumacher B.M. About the role of debris in the gap during electrical discharge machining. Annals CIRP 39 1 (1990) 197-199
31. Rozenek M., Kozak J., and Dabrowski L. Study of electrical discharge machining using powder suspended working media. 12th ISEM Bilbao (2001) 351-357
32. Pecas P., and Henriques E.A. Emerging technologies in penetration EDM. O Molde 55 (2002) 26-36
33. Tani T., Fukazawa F., Mohri N., and Okada M. Machining phenomena in EDM of insulating ceramics using powder suspended working oil. 12th ISEM Bilbao (2001) 388-392