Corrigendum to “Cerium nitrate and stearic acid modified corrosion-resistant micro-arc oxidation coating on magnesium alloy” [Surf. Coat. Technol. 478 (2024) 130461] (The relationship between case depth and bending fatigue strength of gas carburized SAE 8620 steel (2007) 201(12) (5979–5987), (S0257897206013697), (10.1016/j.surfcoat.2006.11.006));The relationship between case depth and bending fatigue strength of gas carburized SAE 8620 steel

Surface and Coatings Technology

Volumn 201, Issue 12, 2007, Pages 5979-5987

  Asi, Osman ^a   Can, Ahmet Çetin ^b   Pineault, James ^c   Belassel, Mohammed ^c  

^a USAK UNIVERSITY   (Turkey)

^b PAMUKKALE UNIVERSITY   (Turkey)

^c Proto Manufacturing Limited   (Canada)

Author keywords

Bending fatigue strength; Case depth; Gas carburizing; Internal oxidation

Indexed keywords

AUSTENITE; BENDING (DEFORMATION); CARBURIZING; COMPRESSIVE STRESS; CRACK INITIATION; CRACK PROPAGATION; FATIGUE OF MATERIALS; INTERNAL OXIDATION; METALLOGRAPHIC MICROSTRUCTURE; RESIDUAL STRESSES; STRESS ANALYSIS;

BENDING FATIGUE STRENGTH; CASE DEPTH; GAS CARBURIZING;

STEEL;

AUSTENITE; BENDING (DEFORMATION); CARBURIZING; COMPRESSIVE STRESS; CRACK INITIATION; CRACK PROPAGATION; FATIGUE OF MATERIALS; INTERNAL OXIDATION; METALLOGRAPHIC MICROSTRUCTURE; RESIDUAL STRESSES; STEEL; STRESS ANALYSIS;

EID: 33846644086     PISSN: 02578972     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.surfcoat.2024.130998     Document Type: Erratum

References (25)

1. Krauss G. Metals Handbook. Heat Treating vol. 4 (1991), ASM International, Materials Park, Ohio 363
2. Parrish G. Carburizing: Microstructures and Properties (1999), ASM International, Materials Park, Ohio
3. Wise J.P., Matlock D.K., and Krauss G. Heat Treating Progress (August/September 2001) 33
4. Oda S., Koide T., Matsui M., and Yamamoto Y. JSME Int. J. 32 (1989) 455
5. Naito T., Ueda H., and Kikuchi M. Metall. Trans., A, Phys. Metall. Mater. Sci. 15A (1984) 1431
6. Silva V.F., Canale L.F., Spinelli D., Bose-Filho W.W., and Crnkovic O.R. J. Mater. Eng. Perform. 8 (1999) 543
7. Krauss G. Adv. Mater. Process. 148 (1995) 42EE
8. Hu Z.Z., Ma M.L., Liu Y.Q., and Liu J.H. Int. J. Fatigue 19 (1997) 641
9. Elkholy A. Wear 88 (1983) 233
10. Elkholy A. Wear 95 (1984) 79
11. Ramanathan S., and Radhakrishnan V.M. Wear 45 (1977) 323
12. Genel K., and Demirkol M. Int. J. Fatigue 21 (1999) 207
13. Evanson K., Krauss G., Medlin D., and Patel M.J. Conference on Carburizing and Nitriding with Atmospheres, 6-8 December 1995, Cleveland, Ohio (1995) 61
14. O. Asi, The effect of high temperature carburizing on bending fatigue strength of SAE 8620 (21NiCrMo2) steel. Ph.D. Thesis, Pamukkale University, Turkey, 2001. (in Turkish).
15. Pineault J.A., Belassel M., and Brauss M.E. Metals Handbook. Failure Analysis and Prevention vol. 11 (2002), ASM International, Materials Park, Ohio 484
16. Jatczak C.F., Larson J.A., and Shini S.W. Retained austenite and its measurement by X-ray diffraction, STP-453. Soc. Automot. Eng. Tech. Pap. Ser. (1980)
17. Pacheco J.L., and Krauss G. Proceedings of an International Conference, Lakewood, Colorado, USA (July 12-14 1989) 227
18. Cornelissen B.E., Matlock D.K., Krauss G., Gondesen B., and Hoffman F.T. SAE Technical Paper Series No. 1999-01-0602 (1999), SAE (Society of Automotive Engineers), Detroit, Michigan
19. Gildersleeve M.J. Mater. Sci. Technol. 7 (1991) 307
20. Kim H.J., and Kweon Y.G. Metall. Mater. Trans., A Phys. Metall. Mater. Sci. 27A (1996) 2557
21. Preston S. Mater. Trans., JIM 34 (1999) 27
22. Farfan S., Gonzalez C.R., Hernandez T.C., and Mesmacque G. Int. J. Fatigue 26 (2004) 673
23. Hyde R.S., Krauss G., and Matlock D.K. SAE Technical Paper Series vol. 940788 (1994), SAE (Society of Automotive Engineers), Detroit, Michigan
24. Cohen R.E., Krauss G., and Matlock D.K. SAE Technical Paper Series vol. 930963 (1993), SAE (Society of Automotive Engineers), Detroit, Michigan
25. Benedetti M., Fontanari V., Hohn B.R., Oster P., and Tobie T. Int. J. Fatigue 24 (2002) 1127