Investigation of sound phenomena during quenching process

International Journal of Materials and Product Technology

Volumn 27, Issue 3-4, 2006, Pages 266-288

  Grum, J ^a   Ravnik, F ^a  

^a UNIVERSITY OF LJUBLJANA   (Slovenia)

Author keywords

Acoustic emission; Acoustic spectrograph; Cooling rate; Polymeric solution; Quenching; Sound pressure level; Vapour film

Indexed keywords

ACOUSTIC EMISSION TESTING; ACOUSTIC EMISSIONS; HARDENING; HARDNESS; QUENCHING; RESIDUAL STRESSES;

ACOUSTIC EMISSION SIGNALS; ACOUSTIC SPECTROGRAPH; COOLING RATE; POLYMERIC SOLUTION; SOUND PRESSURE LEVEL; VAPOUR FILM;

ACOUSTIC WAVES;

EID: 33846488990     PISSN: 02681900     EISSN: None     Source Type: Journal    
DOI: 10.1504/IJMPT.2006.011294     Document Type: Conference Paper

References (20)

1. Čudina, M. (2001) 'Technical acoustics - measuring, evaluation and decreasing noise and vibration' (in Slovene: Tehnična akustika - merjenje, vrednotenje in zmanjševanja hrupa in vibracij), Faculty of Mechanical Engineering, University of Ljubljana.
2. Funatani, K. and Totten, G.E. (1996) 'Overview of Prof. Imao Tamura's contributions to the field of heat treating', in E. Tolten, M.A.H. Howes, S. Sjöstrom and K. Funatani (Eds) Proceedings of the 2nd International Conference on Quenching and the Control of Distortion, Cleveland, Ohio, Nov. 1996, pp.3-15.
3. Grum, J. and Božič, S. (1999) 'Influence of various quenching oils and polymeric water solutions on mechanical properties of steel', in G.E. Totten, B. Liščič and H.M. Tensi (Eds) ASM Heat Treating Society, The 3rd International Conference on Quenching and Control of Distortion, Prague, Czech Republic, pp.530-541.
4. Grum, J. and Božič, S. (2003) 'Acoustic emission during quenching of 42CrMo4 steel', Proceedings of the Fourth International Conference on Quenching and the Control of Distortion, Beijing.
5. Grum, J., Božič, S. and Lavrič, R. (1998) 'Influence of mass of steel and a quenching agent on mechanical properties of steel', in R.A. Wallis, H.V. Walton (Eds) Heat Treating, Proceedings of the 18th Conference, including the Liu Dai Memorial Symposium, ASM International, The Materials Information Society, pp.645-654.
6. Grum, J., Božic, S. and Zupančič, M. (1999) 'Influence of quenching process parameters on residual stresses in steels', in G.E. Totten, B. Liščič and H.M. Tensi (Eds) ASM Heat Treating Society, The 3rd International Conference on Quenching And Control of Distortion, Prague, Czech Republic, pp.530-541.
7. Lainer, K. and Tensi, H.M. (1996) 'Determination of vapour film thickness during immersion cooling in aqueous polymer solutions', in E. Totten, M.A.H. Howes, S. Sjöstrom and K. Funatani (Eds) Proceedings of the 2nd International Conference on Quenching and the Control of Distortion, Cleveland, Ohio, Nov. 1996, pp.75-82.
8. Leighton, T.G. (2001) The Acoustic Bubble, Academic Press, p.613.
9. Macherauch, E. and Vohringer, O. (1992) 'Residual stresses after quenching', in B. Liščič, H.M. Tensi, and W. Luty (Eds) Theory and Technology of Quenching, A Handbook, Heidelberg: Springer-Verlag Berlin, pp. 117-181.
10. Misch, F.M. (1963) Acoustical measurement of incipient boiling, SAN - 1009.
11. Osborne, M.F. (1947) 'The acoustical concomitants of cavitation and boiling, produced by a hot wire', I.J. Acoust. Soc. Amer., Vol. 19, pp. 13-20.
12. Stoebener, D. (2005) 'Wet-state ultrasonic measurements of cylindrical workpiece during immersion cooling', IDE 2005, Bremen.
13. Tensi, H.M. (1991) 'Wetting kinematics', in B. Lišč ič, H.M. Tensi and W. Luty (Eds) Theory and Technology of Quenching, A Handbook, Berlin: Springer-Verlag, p.481.
14. Tensi, H.M. and Stitzelberger-Jakob, P. (1989) 'Evaluation of apparatus for assessing effect of forced convection on quenching characteristics', Materials Science and Technology, Vol. 5, pp.718-724.
15. Tensi, H.M. and Totten, G.E. (1996) 'Development of the understanding of the influence of wetting behaviour on quenching and the merits in these developments of professor Imao Tamura', Proceedings of the 2nd International Conference on Quenching and the Control of Distortion, November 4-7, 1996.
16. Tensi, H.M., Totten, G.E. and Kunzel, T. (2000) 'Physics and technology of quenching in fluids - Part I: Physics of quenching', in K. Funatani and G.E. Totten (Eds) Heat Treating, Proceedings of the 20th Conference, Vol. 2, St. Louis, Missouri, Oct. 2000. pp.727-730.
17. Tensi, H.Th., Künzel, Th. and Stitzelberger-Jakob, P. (1987) 'Benetzungskinetik als wichtige Kenngrosse für die Härtung beim Tauchkühlen', HTM, Vol. 42, pp.125-132.
18. Tomšič, M. (1973) 'Acoustic phenomena in boiling', Doctor's thesis, Faculty of Mechanical Engineering, Ljubljana.
19. Totten, G. and Canale, I.C.F. (2005) 'Overview of distortion and residual stress due to quench processing: Part I - factors affecting quench distortion', International Journal of Materials and Product Technology, Inderscience Enterprises Ltd.
20. Totten, G.E., Dakins, M.E. and Heins, R.W. (1988) 'Cooling curve analysis of synthetic quenchants - a historical perspective', J. Heat Treating, Vol. 6, No. 2, pp.87-95.