Alloy design of creep resistant 9Cr steel using a dispersion of nano-sized carbonitrides

International Journal of Pressure Vessels and Piping

Volumn 84, Issue 1-2, 2007, Pages 3-12

  Abe, F ^a   Taneike, M ^a   Sawada, K ^a  

^a NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

Author keywords

9cr steel; Creep strength; Martensitic microstructure; Minimum creep rate; MX nitride; TiC

Indexed keywords

CARBON NITRIDE; COMPOSITION EFFECTS; CREEP TESTING; DISPERSIONS; HIGH TEMPERATURE EFFECTS; MARTENSITE; METALLOGRAPHIC MICROSTRUCTURE; NANOSTRUCTURED MATERIALS; TEMPERING; THERMODYNAMIC STABILITY;

ALLOY DESIGN; CREEP STRENGTH; MARTENSITIC MICROSTRUCTURE;

STEEL;

CARBON NITRIDE; COMPOSITION EFFECTS; CREEP TESTING; DISPERSIONS; HIGH TEMPERATURE EFFECTS; MARTENSITE; METALLOGRAPHIC MICROSTRUCTURE; NANOSTRUCTURED MATERIALS; STEEL; TEMPERING; THERMODYNAMIC STABILITY;

EID: 33846316048     PISSN: 03080161     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijpvp.2006.09.003     Document Type: Article

References (29)

1. Blum R, Vanstone RW. Materials development for boilers and steam turbines operating at 700 °C. In: Proceedings of the sixth international Charles Parsons turbine conference, Dublin, Ireland, 16-18 September 2003. p. 489-510.
2. Viswanathan R, Henry JF, Tanzosh J, Stanko G, Shingledecker J, Vitalis B. US program on materials technology for USC power plants. In: Proceedings of the fourth international conference on advances in materials technology for fossil power plants, Hilton Head Island, South Carolina, USA, 25-28 October 2004. p. 3-19.
3. Abe F, Okada H, Wanikawa S, Tabuchi M, Itagaki T, Kimura K, et al. Guiding principles for development of advanced ferritic steels for 650 °C USC boilers. In: Proceedings of the seventh Liege conference on materials for advanced power engineering 2002, Liege, Belgium; 30 September-2 October 2002. p. 1397-406.
4. Abe F. Bainitic and martensitic creep-resistant steels. Curr Opin Solid State Mater Sci 8 (2004) 305-311
5. Abe F, Horiuchi T, Taneike M, Sawada K. Improvement of creep strength by boron and nano-size nitrides for tempered-martensitic 9Cr-3W-3Co-VNb steel at 650 °C. In: Proceedings of the sixth international Charles Parsons turbine conference, Dublin, Ireland; 16-18 September 2003 p. 379-96.
6. Horiuchi T., Igarashi M., and Abe F. Improved utilization of added B in 9Cr heat-resistant steels containing W. ISIJ Intl 42 (2002) S67-S71
7. Abe F., Horiuchi T., and Sawada K. High-temperature annealing for maximization of dissolved boron in creep-resistant martensitic 9Cr steel. Mater Sci Forum 426 (2003) 1393-1398
8. Abe F. Coarsening behavior of lath and its effect on creep rates in tempered martensitic 9Cr-W steels. Mater Sci Eng A 387-389 (2004) 565-569
9. Wey M.Y., Sakuma T., and Nishizawa T. Growth of alloy carbide particles in austenite. Trans Japan Inst Met 22 (1981) 733-742
10. Oikawa H. Review on lattice diffusion of substitutional impurities in iron. Technology reports, Tohoku University, Sendai, Japan, vol. 47. 1982. p. 215-24.
11. Taneike M., Abe F., and Sawada K. Creep-strengthening of steel at high temperatures using nano-sized carbonitride dispersions. Nature 424 (2003) 294-296
12. 6 carbides and MX carbonitrides in martensitic 9Cr steel during heat treatment. Metall Mater Trans A 35A (2004) 1255-1262
13. Abe F., Araki H., and Noda T. The effect of W on dislocation recovery and precipitation behavior of low radioactivation martensitic 9Cr steels. Metall Trans A 22A (1991) 2225-2235
14. Eggeler G., Nilsvang N., and Ilschner B. Microstructural changes in a 12% chromium steel during creep. Steel Res 58 (1987) 97-103
15. Eggeler G. The effect of long-term creep on particle coarsening in tempered martensite ferritic steels. Acta Metall 37 (1989) 3225-3234
16. Williams K.R., and Wilshire B. Effect of microstructural instability on the creep and fracture behaviour of ferritic steels. Mater Sci Eng 28 (1977) 289-296
17. Straub S., Meier M., Ostermann J., and Blum W. Development of microstructure and strengthening in ferritic steel X20 CrMoV121 at 823 K. VGB Kraftwerkstechnik 73 (1993) 646-653
18. Abe F., Nakazawa S., Araki H., and Noda T. The role of microstructural instability on creep behavior of a low radiaoactivation martensitic 9Cr-2W steel. Metall Trans A 23A (1992) 469-477
19. Abe F. Effect of quenching, tempering and cold rolling on creep deformation behavior of a tempered martensitic 9Cr-1W steel. Metall Mater Trans A 34A (2003) 913-925
20. Kimura M., Kobayashi K., and Yamaguchi K. Creep and fatigue properties of newly developed ferritic heat-resisting steels for ultra super critical power plants. Mater Sci Res Int 9 (2003) 50-54
21. Abe F. Ultra-Steel R&D in NIMS for 650 °C USC plant. In: Proceedings of the eighth ultra-steel workshop, Tsukuba, Japan, 21-21 July, 2004. p.188-93.
22. Sawada K., Taneike M., Kimura K., and Abe F. Effect of nitrogen content on microstructural aspects and creep behavior in extremely low carbon 9Cr heat-resistant steel. ISIJ Intl 44 (2004) 1243-1249
23. Strang A., and Vodarek V. Z-phase formation in martensitic 12CrMoVNb steel. Mater Sci Technol 12 (1996) 552-556
24. Strang A, Foldyna V, Lenert J, Vodarek V, Mayer K-H. Prediction of the long-term creep rupture properties of 9-12%Cr power plant steels. In: Proceedings of the sixth international Charles Parsons turbine conference, Dublin, Ireland, 16-18 September 2003. p. 427-41.
25. Vodarek V., and Strang A. Effect of nickel on the precipitation processes in 12CrMoV steel during creep at 550 °C. Scripta Mater 38 (1998) 101-106
26. National Research Institute for Metals Creep Data Sheet, National Research Institute for Metals, Tokyo, Japan, vol. 43. 1996.
27. National Institute for Material Science Creep Data Sheet, National Institute for Material Science, Tokyo, Japan, vol. 48. 2002.
28. Gustafsson A., and Hättestrand M. Coarsening of precipitates in an advanced creep resistant 9% chromium steel-quantitative microscopy and simulations. Mater Sci Eng A 333 (2002) 279-286
29. Taneike M., Fujitsuna N., and Abe F. Improvement of creep strength by fine distribution of TiC in 9Cr ferritic heat resistant steel. Mater Sci Technol 20 (2004) 1455-1461