Wastage rate of water walls in a commercial circulating fluidized bed combustor

Canadian Journal of Chemical Engineering

Volumn 84, Issue 6, 2006, Pages 680-687

  Kim, Tae Woo ^a   Choi, Jeong Hoo ^a   Shun, Do Won ^b   Jung, Bongjin ^c   Kim, Soo Sup ^d   Son, Jae Ek ^e   Kim, Sang Done ^f   Grace, John R ^g  

^a Konkuk University   (South Korea)

^b Korea Institute of Energy Research (KIER)   (South Korea)

^c Suwon University   (South Korea)

^d SK Chemicals   (South Korea)

^e Seoul National University of Science and Technology   (South Korea)

^f Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

^g UNIVERSITY OF BRITISH COLUMBIA   (Canada)

Author keywords

Circulating fluidized bed; Combustor; Erosion; Tube wear; Wastage

Indexed keywords

EROSION; FLUIDIZED BED FURNACES; TUBES (COMPONENTS); WEAR OF MATERIALS; WEAR RESISTANCE;

CIRCULATING FLUIDIZED BED (CFB); TUBE WEAR; WASTAGE;

FLUIDIZED BED COMBUSTORS;

EROSION; FLUIDIZED BED COMBUSTORS; FLUIDIZED BED FURNACES; TUBES (COMPONENTS); WEAR OF MATERIALS; WEAR RESISTANCE;

EID: 33846305101     PISSN: 00084034     EISSN: None     Source Type: Journal    
DOI: 10.1002/cjce.5450840606     Document Type: Article

References (35)

1. Dutheillet, Y. and V. Prunier, "Evaluation of the Erosion-Corrosion Resistance of Coated Metallic Materials for CFBCs Applications," Schriften des Forschungszentrums Juelich, Reihe Energietechnik/Energy Technology 5, 779-787 (1998).
2. Fan, J., D. Zhou and K. Cen, "Study of the Fin-Tube Erosion-Protection Method in the Circulating Fluidized Beds," Huaxue Fanying Gongcheng Yu Gongyi 6, 37-44 (1990).
3. Geng, G. Q., B. Q. Wang and A. V. Levy, "The Effect of the Composition of Fluidized Bed Combustor Bed Materials on the Erosion-Corrosion of Carbon Steel," Wear 150, 125-134 (1991).
4. Grabke, H. J., E. Reese and M. Spiegel, "The Effects of Chlorides, Hydrogen Chloride, and Sulfur Dioxide in the Oxidation of Steels below Deposits," Corrosion Science 37, 1023-1043 (1995).
5. Harris, A. T., J. F. Davidson and R. B. Thorpe, "Influence of Exit Geometry in Circulating Fluidized-Bed Risers," AIChE J. 49, 52-64 (2003).
6. th Int. Conf. on Fluidized Bed Combustion," (1991), pp. 743-753.
7. Hou, P. Y., J. T. Sum, Y. Niu and J. Stringer, "HCl Effect on In-Bed Tube Wastage in Bubbling Fluidized Bed, A Laboratory Study Under Simulated Dense Particle Impact Conditions," in "Proc. of 15th Int. Conf. on Fluidized Bed Combustion," (1999), pp. 1335-1353.
8. Jestin, L., P. Meyer, G. Schmitt and J. X. Morin, "Heat Transfer in a 125 MWe CFB Boiler," in "Fluidization VII," O. E. Potter and D. J. Nicklin, Eds., Engineering Foundation, New York (1992), pp. 849-856.
9. th Int. Conf. on Fluidized Bed Combustion," (1991), pp. 1445-1449.
10. Kunii, D. and O. Levenspiel, "Fluidization Engineering," Butterworth-Heinemann, Boston, MA (1991).
11. Lee, G. S. and S. D. Kim, "Pressure Fluctuations in Turbulent Fluidized Beds," J. Chem. Eng. Japan 21, 515-521 (1988).
12. Lindsley, B. A., A. R. Marder and J. J. Lewnard, "The Effect of Circulating Fluidized Bed Particle Characteristics on Erosion of 1020 Carbon Steel," Wear 188, 33-39 (1995).
13. Lockhart, C., J. Zhu, C. M. H. Brereton, C. J. Lim and J. R. Grace, "Local Heat Transfer, Solids Concentration and Erosion around Membrane Tubes in a Cold Model Circulating Fluidized Bed," International Journal of Heat and Mass Transfer 38, 2403-2410 (1995).
14. Lyczkowski, R. W. and J. X. Bouillard, "Scaling and Guidelines for Erosion in Fluidized Beds," Powder Technology 125, 217-225 (2002).
15. Montgomery, M. and A. Karlsson, "In-situ Corrosion Investigation at Masnedo CHP Plant. A Straw-Fired Power Plant in Denmark," Materials and Corrosion 50, 579-584 (1999).
16. Nafari, A. and A. Nylund, "Erosion Corrosion of Steel Tubes in the Loop Seal of a Biofuel Fired CFB Plant," Schriften des Forschungszentrums Juelich, Reihe Energietechnik/ Energy Technology 21, 969-978 (2002).
17. th Int. Conf. on Fluidized Bed Combustion," (1989), pp. 583-589.
18. Prandtl, L., "Essentials of Fluid Dynamics," Blackie & Son, London (1952), pp. 145-149.
19. th Int. Conf. on Fluidized Bed Combustion," (1993), pp. 811-817.
20. Rogers, P. M., I. M. Hutchings, J. A. Little and F. Kara, "Microstructural Characterization of Surface Layers Formed on a Low Alloy Steel During Erosion-Oxidation in a Fluidized Bed," Journal of Materials Science 32, 4575-4583 (1997).
21. Seitzinger, D. L., "Atmospheric Fluidized Bed Combustion Gas Erosion Solution," in "Proc. 13th Int. Conf. on Fluidized Bed Combustion," (1995), pp. 585-595.
22. Solomon, N. G., "Erosion-Resistant Coatings for Fluidized Bed Boilers," Materials Performance 37, 38-43 (1998).
23. th Int. Conf. on Fluidized Bed Combustion," (1991), pp. 589-608.
24. th Int. Conf. on Circulating Fluidized Beds," (1996), pp. Eq2.1-2.6.
25. Van der Meer, E. H., R. B. Thorpe and J. F. Davidson, "Flow Patterns in the Square Cross-Section Riser of a Circulating Fluidized Bed and the Effect of Riser Exit Design," Chem. Eng. Sci. 55, 4079-4099 (2000).
26. th Int. Conf. on Fluidized Bed Combustion," (1989), pp. 927-935.
27. Wang, B.-Q., "Erosion-Corrosion of Coatings by Biomass-Fired Boiler Fly Ash," Wear 188, 40-48 (1995).
28. 2-NiCr Coating," Wear 199, 268-274 (1996).
29. Wang, B. Q., G. Q. Geng and A. V. Levy, "Surface Behavior of Heat Exchanger Tubes in Fluidized-Bed Combustors," Surface and Coatings Technology 42, 253-274 (1990).
30. Wang, B. Q., G. Q. Geng, A. V. Levy and W. Mack, "Erosivity of Particles in Circulating Fluidized Bed Combustors," Wear 152, 201-222 (1992).
31. Wang, B.-Q. and S. W. Lee, "Erosion Resistance of Cooled Thermal Sprayed Coatings under Simulated Erosion
32. th Int. Conf. on Fluidized Bed Combustion," (1997), pp. 335-342.
33. Wang, B.-Q. and K. Luer, "The Relative Erosivity of Limestone, Dolomite and Coal Samples from an Operating Boiler," Wear 215, 180-190 (1998).
34. th Int. Conf. on Fluidized Bed Combustion," (2001), pp. 1451-1465.
35. Zhu, J., J. R. Grace and C. J. Lim, "Tube Wear in a Gas Fluidized Beds - I. Experimental Findings," Chem. Eng. Sci. 45, 1003-1015 (1990).