Effect of cold spray deposition of a titanium coating on fatigue behavior of a titanium alloy

Journal of Thermal Spray Technology

Volumn 15, Issue 4, 2006, Pages 507-512

  Price, T S ^a   Shipway, P H ^a   McCartney, D G ^a  

^a UNIVERSITY OF NOTTINGHAM   (United Kingdom)

Author keywords

CGDS; Fatigue; Residual stress; Ti6Al4V; Titanium; Young's modulus

Indexed keywords

COLD SPRAY DEPOSITION; FATIGUE ENDURANCE LIMIT; GRIT-BLASTED SUBSTRATE; SUBSTRATE-COATING INTERFACE PROPERTIES; TITANIUM COATING;

COATINGS; DEPOSITION; ELASTIC MODULI; FATIGUE OF MATERIALS; PROSTHETICS; SURFACE TREATMENT; TITANIUM; TITANIUM ALLOYS;

SPRAYING;

EID: 33846293647     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1361/105996306X147108     Document Type: Conference Paper

References (24)

1. G. Rizzi, A. Scrivani, M. Fini, and R. Giardino, Biomedical Coatings to Improve the Tissue-Biomaterial Interface, Int. J. Artif. Organs, 2004, 27, p 649-657
2. D.M. Brunette, Principles of Cell Behavior on Titanium Surfaces and Their Application to Implanted Devices, D.M. Brunette, P. Tengvall, M. Textor, and P. Thomsen, Ed., Titanium in Medicine: Material Science, Surface Science, Engineering, Biological Responses and Medical Applications, Springer-Verlag, 2001, p 485-512
3. J. Breme, E. Eisenbarth, and V. Biehl, Titanium and Its Alloys for Medical Applications, Titanium and Titanium Alloys: Fundamentals and Applications, C. Leyens and M. Peters, Ed., Wiley-VCH, 2003, p 423-452
4. J. Dumbleton and M.T. Manley, Current Concepts Review: Hydroxy-apatite-Coated Prostheses in Total Hip and Knee Arthroplasty, J. Bone Joint Surg. Am., 2004, 86A, p 2526-2540
5. L. Carlsson, L. Regner, C. Johansson, M. Gottlander, and P. Herberts, Bone Response to Hydroxyapatite-Coated and Commercially Pure Titanium Implants in the Human Arthritic Knee, J. Orthop. Res., 1994, 12, p 274-285
6. A.J.M. Yee, H.K. Kreder, I. Bookman, and J.R. Davey, A Randomized Trial of Hydroxyapatite Coated Prostheses in Total Hip Arthroplasty, Clin. Orthop., 1999, 366, p 120-132
7. M. Hamadouche, J. Witvoet, R. Porcher, A. Meunier, L. Sedel, and R. Nizard, Hydroxyapatite-Coated versus Grit-Blasted Femoral Stems: A Prospective, Randomised Study Using EBRA-FCA, J. Bone Joint Surg. Br., 2001, 83B, p979-987
8. A. Eckardt, H.M. Aberman, H.D. Cantwell, and J. Heine, Biological Fixation of Hydroxyapatite-Coated versus Grit-Blasted Titanium Hip Stems: A Canine Study, Arch. Orthop. Trauma Surg., 2003, 123, p 28-35
9. N. Aebli, J. Krebs, H. Stich, P. Schawalder, M. Walton, D. Schwenke, H. Gruner, B. Gasser, and J.C. Theis, In Vivo Comparison of the Osseointegration of Vacuum Plasma Sprayed Titanium- and Hydroxyapatite-Coated Implants, J. Biomed. Mater. Res. Part A, 2003, 66A, p 356-363
10. Y.H. Kim, J.S. Kim, S.H. Oh, and J.M. Kim, Comparison of Porous-Coated Titanium Femoral Stems with and without Hydroxyapatite Coating, J. Bone Joint Surg. Am., 2003, 85A, p 1682-1688
11. S.A. Hacking, M. Tanzer, E.J. Harvey, J.J. Krygier, and J.D. Bobyn, Relative Contributions of Chemistry and Topography to the Osseointegration of Hydroxyapatite Coatings, Clin. Orthop., 2002, 405, p 24-38
12. R.C. Dykhuizen and M.F. Smith, Gas Dynamic Principles of Cold Spray, J. Therm. Spray Technol., 1998, 7, p 205-212
13. V. Shukla, G.S. Elliott, B.H. Kear, and L.E. McCandlish, Hyperkinetic Deposition of Nanopowders by Supersonic Rectangular Jet Impingement, Scr. Mater., 2001, 44, p 2179-2182
14. M. Baleani, M. Viceconti, and A. Toni, The Effect of Sandblasting Treatment on Endurance Properties of Titanium Alloy Hip Prostheses, Artif. Organs, 2000, 24, p 296-299
15. R.S. Bellows, S. Muju, and T. Nicholas, Validation of the Step Test Method for Generating Haigh Diagrams for Ti-6Al-4V, Int. J. Fatigue, 1999, 21, p 687-697
16. D.C. Maxwell and T. Nicholas, A Rapid Method for Generation of a Haigh Diagram for High Cycle Fatigue, ASTM STP 1332, Fatigue and Fracture Mechanics, Vol. 29, T.L. Panontin and S.D. Sheppard, Ed., ASM International 1999, p 626-641
17. S.R. Thompson, J.J. Ruschau, and T. Nicholas, Influence of Residual Stresses on High Cycle Fatigue Strength of Ti-6Al-4V Subjected to Foreign Object Damage, Int. J. Fatigue, 2001, 23, p S405-S412
18. T. Nicholas, Step Loading for Very High Cycle Fatigue, Fatigue Fract. Eng. Mater. Struct., 2002, 25, p 861-869
19. E.P. Popov and T.A. Balan, Engineering Mechanics of Solids, 2nd ed., Prentice-Hall, Inc., 1999
20. T.W. Clyne and S.C. Gill, Residual Stresses in Thermal Spray Coatings and Their Effect on Interfacial Adhesion: A Review of Recent Work, J. Therm. Spray Technol., 1996, 5, p 401-418
21. G.E. Dieter, Mechanical Metallurgy, 3rd ed., McGraw-Hill, 1986
22. R.S. Lima, A. Kucuk, C.C. Berndt, J. Karthikeyan, C.M. Kay, and J. Lindemann, Deposition Efficiency, Mechanical Properties and Coating Roughness in Cold-Sprayed Titanium, J. Mater. Sci. Lett., 2002, 21, p 1687-1689
23. S. Kuroda and T.W. Clyne, The Quenching Stress in Thermally Sprayed Coatings, Thin Solid Films, 1991, 200, p 49-66
24. S. Sampath, X.Y. Jiang, J. Matejicek, L. Prchlik, A. Kulkarni, and A. Vaidya, Role of Thermal Spray Processing Method on the Microstructure, Residual Stress and Properties of Coatings: An Integrated Study for Ni-5 wt.% Al Bond Coats, Mater. Sci. Eng. A, 2004, 364, p 216-231