Influence of phosphorus element on direct laser sintering of multicomponent Cu-based metal powder

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Volumn 37, Issue 6, 2006, Pages 967-977

  Gu, D D ^a   Shen, Y F ^a  

^a NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS   (China)

Author keywords

[No Author keywords available]

Indexed keywords

COPPER POWDER METALLURGY; DELAMINATION; DENSIFICATION; LASERS; METAL WORKING; MICROSTRUCTURE; PHOSPHORUS; SINTERING; THERMAL EFFECTS;

CUPO3; DIRECT LASER SINTERING; OPTIMAL PROCESSING PARAMETERS; ROOM TEMPERATURE;

COPPER POWDER;

EID: 33846191064     PISSN: 10735615     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02735019     Document Type: Article

References (48)

1. A. Simchi: Metall. Mater. Trans. B, 2004, vol. 35, pp. 937-48.
2. M. Agarwala, D. Bourell, J. Beaman, H. Marcus, and J. Barlow: Rapid Prototyping J., 1995, vol. 1 (1), pp. 26-36.
3. S. Das, J.J. Beaman, M. Wohlert, and D.L. Bourell: Rapid Prototyping J., 1998, vol. 4 (3), pp. 112-17.
4. H.H. Zhu, L. Lu, and J.Y.H. Fuh: Mater. Sci. Eng., A, 2004, vol. 371, pp. 170-77.
5. A. Simchi and H. Pohl: Mater. Sci. Eng., A, 2003, vol. 359, pp. 119-28.
6. A. Simchi and H. Pohl: Mater. Sci. Eng., A, 2004, vol. 383, pp. 191-200.
7. S. Das, M. Wohlert, J.J. Beaman, and D.L. Bourell: Mater. Des., 1999, vol. 20, pp. 115-21.
8. H.H. Zhu, J.Y.H. Fuh, and L. Lu: Rapid Prototyping J., 2005, vol. 11 (2), pp. 74-81.
9. S. Das: Adv. Eng. Mater., 2003, vol. 5 (10), pp. 701-11.
10. Y. Tang, J.Y.H. Fuh, H.T. Loh, Y.S. Wong, and L. Lu: Mater. Des., 2003, vol. 24, pp. 623-29.
11. D.D. Gu and Y.F. Shen: Key Eng. Mater., 2006, vols. 315-16, pp. 344-47.
12. H. Asgharzadeh and A. Simchi: Mater. Sci. Eng., A, 2005, vol. 403, pp. 290-98.
13. H.J. Niu and I.T.H. Chang: Scripta Mater., 1998, vol. 39 (1), pp. 67-72.
14. H.J. Niu and I.T.H. Chang: Scripta Mater., 1999, vol. 41 (1), pp. 25-30.
15. H.J. Niu and I.T.H. Chang: Scripta Mater., 1999, vol. 41 (11), pp. 1229-34.
16. H.H. Zhu, L. Lu, J.Y.H. Fuh, and C.C. Wu: Mater. Des., 2006, vol. 27, pp. 166-70.
17. Y.F. Shen, D.D. Gu, and Y.F. Pan: Key Eng. Mater., 2006, vols. 315-16, pp. 357-60.
18. A. Simchi, F. Petzoldt, and H. Pohl: Int. J. Powder Metall, 2001, vol. 37 (2), pp. 49-61.
19. N. Tolochko, S. Mozzharov, T. Laoui, and L. Froyen: Rapid Prototyping J., 2003, vol. 9 (2), pp. 68-78.
20. Y.P. Kathuria: Surf. Coat. Technol., 1999, vols. 116-19, pp. 643-47.
21. N.K. Tolochko, S.E. Mozzharov, I.A. Yadroitsev, T. Laoui, L. Froyen, V.l. Titov, and M.B. Ignatiev: Rapid Prototyping J., 2004, vol. 10 (2), pp. 78-87.
22. X. Wu, R. Sharman, J. Mei, and W. Voile: Mater. Des., 2004, vol. 25, pp. 103-09.
23. Y.A. Song: Ann. CIRP, 1997, vol. 46 (1), pp. 127-30.
24. T.H.C. Childs, C. Hauser, and M. Badrossamay: Proc. MechE Part B: J. Eng. Manufacture, vol. 219, pp. 339-57.
25. A. Simchi and H. Asgharzadeh: Mater. Sci. Technol., 2004, vol. 20, pp. 1462-68.
26. A.N. Chatterjee, S. Kumar, P. Saha, P.K. Mishra, and A.R. Choudhury: J. Mater. Process. Technol., 2003, vol. 136, pp. 151-57.
27. A.I. Kovalev, V.P. Mishina, D.L. Wainstein, V.I. Titov, V.F. Moiseev, and N.K. Tolochko: J. Mater. Eng. Performance, 2002, vol. 11 (5), pp. 492-95.
28. J.P. Kruth, S. Kumar, and J. Van Vaerenbergh: Rapid Prototyping J., 2005, vol. 11 (5), pp. 287-92.
29. H.H. Zhu, J.Y.H. Fuh, and L. Lu: Proc. IMechE Part C. J. Mechanical Eng. Sci., 2003, vol. 217, pp. 139-47.
30. K. Murali, A.N. Chatterjee, P. Saha, R. Palai, S. Kumar, S.K. Roy, P.K. Mishra, and A.R. Choudhury: J. Mater. Process. Technol., 2003, vol. 136, pp. 179-85.
31. A. Simchi, F. Petzoldt, and H. Pohl: J. Mater. Process. Technol., 2003, vol. 141, pp. 319-28.
32. S. Rossi, F. Deflorian, and F. Venturini: J. Mater. Process. Technol., 2004, vol. 148, pp. 301-09.
33. M.W. Khaing, J.Y.H. Fuh, and L. Lu: J. Mater. Process. Technol., 2001, vol. 113, pp. 269-72.
34. C.T. Xu, Y.F. Shen, D.D. Gu, J.L. Yang, and Y. Wang: Rare Met. Mater. Eng., 2005, vol. 34, pp. 341-44.
35. H.H. Zhu, L. Lu, and J.Y.H. Fuh: J. Mater. Process. Technol., 2003, vol. 140, pp. 314-17.
36. D.D. Gu and Y.F. Shen: Mater. Sci. Eng., A, 2006, vols. 435-36, pp. 54-61.
37. Y. Tang, H.T. Loh, Y.S. Wong, J.Y.H. Fuh, L. Lu, and X. Wang: J. Mater. Process. Technol., 2003, vol. 140, pp. 368-72.
38. D.D. Gu and Y.F. Shen: Powder Metall., 2006, vol. 49 (3), pp. 258-64.
39. D.D. Gu, Y.F. Shen, P. Dai, and M.C. Yang: Trans. Nonferrous Met. Soc. China, 2006, vol. 16, pp. 357-62.
40. Y.F. Shen, D.D. Gu, P. Wu, J.L. Yang, and Y. Wang: Trans. Nonferrous Met. Soc. China, 2005, vol. 15, pp. 1309-14.
41. E. Zumelzu and C. Cabezas: J. Mater. Process. Technol., 1996, vol. 57, pp. 249-52.
42. W.D. Rupert: Weld. J., 1996, vol. 75 (5), pp. 43-45.
43. S.V. Muchnik, A.K. Radchenko, O.A. Katrus, A.K. Shurin, A.N. Razumova, and K.A. Lynchak: Powder Metall. Met. Ceram., 1992, vol. 31, pp. 922-25.
44. I. Barin: Thermochemical Data of Pure Substances, 3rd ed., VCH, New York, NY, 1993, pp. 602-1263.
45. X.C. Wang, T. Laoui, J. Bonse, J.P. Kruth, B. Lauwers, and L. Froyen: Int. J. Adv. Manuf. Technol., 2002, vol. 19 (5), pp. 351-57.
46. R.M. German: Int. J. Powder Metall., 1990, vol. 26, pp. 35-42.
47. X.F. Yang: Appl. Phys. Lett., 1995, vol. 67, pp. 2249-51.
48. W. Jin, J. Koplik, and J.R. Banavar: Phys. Rev. Lett., 1997, vol. 78, pp. 1520-23.