Design of postbuckled spinal structures for airfoil camber and shape control

AIAA Journal

Volumn 44, Issue 12, 2006, Pages 3115-3124

  Ursache, Narcis M ^a,b   Keane, Andy J ^a,b   Bressloff, Neil W ^a,b  

^a UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

^b Department of Computational Engineering   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

AERODYNAMIC CLADDING; CAMBERS; FLAPS; OPTIMIZED BEAM; SPINAL STRUCTURES;

AERODYNAMICS; BUCKLING; CLADDING (COATING); DEFORMATION; MANEUVERABILITY; NONLINEAR SYSTEMS; OPTIMIZATION;

AIRFOILS;

EID: 33846092512     PISSN: 00011452     EISSN: None     Source Type: Journal    
DOI: 10.2514/1.22636     Document Type: Article

References (44)

1. Khot, N. S., "Deformation of a Flexible Wing Using an Actuating System for a Rolling Maneuver Without Ailerons," AIAA Paper 98-1802, 1998.
2. Gern, F. H., Inman, D. J., and Kapania, R. K., "Structural and Aeroelastic Modeling of General Planform Wings With Morphing Airfoils," AIAA Journal, Vol. 40, No, 4, April 2002, pp. 628-637.
3. Anderson, J. D., Introduction to Flight, McGraw-Hill, New York, 1978.
4. Austin, F., Rossi, M. J., Van Nostrand, W., Gareth, K., and Jameson, A., "Static Shape Control for Adaptive Wings," AIAA Journal, Vol. 32, No. 9, Sept. 1994, pp. 1985-1901.
5. Chatlynne, E., Rumingny, N., Amitay, M., and Glezer, A., "Virtual Aero-Shaping of a Clark-Y Airfoil Using Synthetic Jet Actuators," AIAA Paper 2000-0732, 2000.
6. Chen, F. J., and Beeler, G. B., "Virtual Shaping of a Two-Dimensional NACA 0015 Airfoil Using Synthetic Jet Actuator," AIAA Paper 2002-3273, 2002.
7. Seifert, A., Eliahu, S., Greenblatt, D., and Wygnanski, I., "Use of Piezoelectric Actuators for Airfoil Separation Control," AIAA Journal, Vol. 36, No. 8, Aug. 1998, pp. 1535-1536.
8. Munday, D., and Jacob, J., "Active Control of Separation on a Wing with Conformal Camber," AIAA Paper 2001-0293, Jan. 2001.
9. Balas, M. J., "Optimal Quasi-Static Shape Control for Large Aerospace Antennae," Journal of Optimization Theory and Applications, Vol. 46, No. 2, 1985, pp. 153-170.
10. Yoon, H. S., Washington, G., and Theunissen, W. H., "Analysis and Design of Doubly Curved Piezoelectric Strip-Actuated Aperature Antennas," IEEE Transactions on Antennas and Propagation, Vol. 48, No. 5, May 2000, pp. 755-763.
11. Saggere, L., and Kota, S., "Static Shape Control of Smart Structures Using Compliant Mechanisms," AIAA Journal, Vol. 37, No. 5, May 1999, pp. 572-578.
12. Lu, K. J., and Kota, S., "Synthesis of Shape Morphing Compliant Mechanisms Using a Load Path Representation Method," Smart Structures and Materials 2003; Modeling, Signal Processing and Control, Proceedings of SPIE, edited by R. C. Smith, Vol. 5049, International Society for Optical Engineering, Bellingham, WA, 2003, pp. 337-348.
13. Natarajan, A., Kapania, R. K., and Inman, D. J., "Aeroelastic Optimization of Adaptive Bumps for Yaw Control," Journal of Aircraft, Vol. 41, No. 1, Jan.-Feb. 2004.
14. Scott, W., "Performance Gains Confirmed in Mission Adaptive Wing Tests," Aviation Week and Space Technology, Vol. 129, No. 77, 1988, p. 77.
15. Pendleton, E., Bessette, D., Field, P., Miller, G., and Griffin, K., "Active Aeroelastic Wing Flight Research Program: Technical Program and Model Analytical Development," Journal of Aircraft, Vol. 37, No. 4, July-Aug. 2000, pp. 554-561.
16. Gano, S. E., Renaud, J. E., Batill, S. M., and Tovar, A., "Shape Optimization for Conforming Airfoils," AIAA Paper 2003-1579, April 2003.
17. Abdulrahim, M., Garcis, H., and Lind, R., "Flight Characteristic of Shaping the Membrane Wing of a Micro Air Vehicle," Journal of Aircraft, Vol. 42, No. 1, Jan.-Feb. 2005, pp. 131-137.
18. Ursache, N. M., Bressloff, N. W., and Keane, A. J., "The Design of Post-Buckled Spinal Structures for Airfoil Shape Control Using Optimization Methods," Proceedings of 5th ASMO UK/ISSMO Conference on Engineering Design Optimization, Leeds Univ. Press. Leeds, U.K., July 2004.
19. [191 Crisfield, M. A., Non-linear Finite Element Analysis of Solids and Structures, Vol. 1, John Wiley and Sons, Chichester, England, U.K., 1997.
20. Wempner, G. A., "Discrete Approximations Related to Nonlinear Theory of Solids," International Journal of Solids and Structures, Vol. 7, No. 11, Nov. 1971, pp. 1581-1591.
21. Riks, E., "The Application of Newton's Method to the Problem of Elastic Stability," Journal of Applied Mechanics, Vol. 39, 1972, pp. 1060-1065.
22. Haftka, R. T., Prasad, B., "Optimum Structural Design with Plate Bending Elements - A Survey," AIAA Journal, Vol. 19, No. 4, 1981, pp. 517-522.
23. Zhou, M., Gu, Y. X., and Rozvany, G. I. N., "Application of DCOC method to Plates and Shells," Proceedings of the First World Congress of Structural and Multidisciplinary Optimization, edited by N. Olhoff and G. N. Rozvany. Elsevier Science, Oxford, 1995. pp. 25-32.
24. Olhoff, N., Krog, L. A., and Lund, E., "Optimization of Multimodal Eigenvalues," Proceedings of the First World Congress of Structural and Multidisciplinary Optimization, edited by N. Olhoff and G. N. Rozvany, Elsevier Science, Oxford, 1995, pp. 701-708.
25. Bochenek, B., "On Postbuckling Constraints in Structural Optimization Against Instability," Proceedings of the First World Congress of Structural and Multidiscipltnary Optimization, edited by N. Olhoff and G. N. Rozvany, Elsevier Science, Oxford, 1995, pp. 717-724.
26. Benitsas, M. M., and Suryatama, D., "Structural Redesign by Large Admissible Perturbations with Static Mode Compensation," Journal of Offshore Mechanics and Arctic Engineering, Vol. 121. No. 1, 1999, pp. 39-46.
27. Blouin, V. Y., and Bernitsas, M. M., "Redesign of Submerged Structure by Large Admissible Perturbations," Journal of Offshore Mechanics and Arctic Engineering, Vol. 123, No. 3, 2001, pp. 102-111.
28. Lighthill, M. J., "A. New Method for Two-Dimensional Aerodynamic Design," Aeronautical Research Council Reports and Memoranda No. 1111, 1945.
29. Daripa, P. K., "On Applications of a Complex Variable Method in Compressible Flows," Journal of Computational Physics, Vol. 88, No. 2, 1990, pp. 337-361.
30. Stanitz, J. D., "General Design Method for Three-Dimensional, Potential Plow Fields," NASA Technical Report CR 3288, 1990.
31. Zannetti, L., "A Natural Formulation for the Solution of Two-Dimensional or Axis-symmetric Inverse Problems," International Journal of Numerical Methods in Engineering, Vol. 22, No. 2, 1986, pp. 451-463.
32. Chaviaropoulos, P., Dedoussis, V., and Papailiou, K. D., "Compressible How Airfoil Design Using Natural Coordinates," Computer Methods in Applied Mechanics and Engineering, Vol. 110, Nos. 1-2, Dec. 1993, pp. 131-142.
33. Giles, M. B., and Drela, M., "Two-Dimensional Transonic Aerodynamic Design Method," AIAA Journal, Vol. 25, No. 9, 1987, pp. 1199-1206.
34. Drela, M., and Giles, M. B., "Viscous-Inviscid Analysis of Transonic and Low Reynolds Number Airfoils," AIAA Journal, Vol. 25, No. 10, 1987, pp. 1347-1355.
35. Campbell, R. L., "Efficient Viscous Design of Realistic Aircraft Configurations," AIAA Paper 98-2593, 1998.
36. Milholen, W. E., "An Efficient Inverse Aerodynamic Design Method for Subsonic Flows," AIAA 2000-0780, 2000.
37. Keane, A. J., and Nair, P. B., Computational Methods for Aerospace Design: The Pursuit of Excellence, John Wiley and Sons, Chichester, England, U.K., 2005.
38. Samareh, J. A., "Survey of Shape Parameterization Techniques for High-Fidelity Multidisciplinary Shape Optimization," AIAA Journal, Vol. 39, No. 5,2001, pp. 877-883.
39. Schram, U., and Pilkey, W. D., "The Application of Rational B-Splines for Shape Optimization," Proceedings of the First World Congress of Structural and Multidisciplinary Optimization, edited by N. Olhoff and G. N. Rozvany, Elsevier Science, Oxford, 1995, pp. 377-382.
40. Farin, G., Curves and Surfaces for Computer-Aided Geometric Design: A Practical Guide, Academic Press, London, 1992.
41. VGK Method for Two-Dimensional Aerofoil Sections, Ver. 2.0, ESDU 96028, ESDU 96029, ESDU International, London, 1997.
42. Cai, J., and Liu, F., "Static Aero-elastic Computation with a Coupled CFD and CSD Method," AIAA Paper 01-0717, 2001.
43. Alonso, J. J., LeGresley, P., van der Weide, E., "High-Fidelity Multi-Disciplinary Optimization," AIAA Paper 2004-4480, 2004.
44. Keane, A. J., "Wing Optimization Using Design of Experiment, Response Surface, and Data Fusion Methods," Journal of Aircraft, Vol. 40, No. 4, 2003, pp. 741-750.