-
1
-
-
0038662015
-
Ballistic impact into fabric and compliant composite laminates
-
Cheeseman B.A., and Bogetti T.A. Ballistic impact into fabric and compliant composite laminates. Comp Struct 61 (2003) 161-173
-
(2003)
Comp Struct
, vol.61
, pp. 161-173
-
-
Cheeseman, B.A.1
Bogetti, T.A.2
-
2
-
-
33845985816
-
-
Anctil B, Keown M, Bourget D, Pageau G, Bolduc M, Shewchenko N. Threat assessment and performance evaluation of multi-threat body armour systems. In: Proceedings of the joint RTO AVT/HFM specialists meeting on "Equipment for personal protection (AVT-097)" and personal protection: bio-mechanical issues and associated physio-pathological risks (HFM-102). Koblenz, Germany. May 19-23, 2003.
-
-
-
-
3
-
-
33846018233
-
-
Gadow R, von Niessen K. Lightweight ballistic structures made of ceramic and cermet/aramide composites. In: Medvedovski E, editor. Ceramic armor and armor systems. Proceedings of the ceramic armor and armor systems symposium held at the 105th annual meeting of the American ceramic society. Nashville, TN; 2003.
-
-
-
-
4
-
-
0347602055
-
Stab resistance of multi-layers knitted structures: comparison between para-aramid and PBO fibers
-
Flambard X., and Polo J. Stab resistance of multi-layers knitted structures: comparison between para-aramid and PBO fibers. J Adv Mater 36 (2004) 30-35
-
(2004)
J Adv Mater
, vol.36
, pp. 30-35
-
-
Flambard, X.1
Polo, J.2
-
5
-
-
0036532323
-
Stabbing of metal sheets by a triangular knife. An archaeological investigation
-
Blyth P.H., and Atkins A.G. Stabbing of metal sheets by a triangular knife. An archaeological investigation. Int J Impact Eng 27 (2002) 459-473
-
(2002)
Int J Impact Eng
, vol.27
, pp. 459-473
-
-
Blyth, P.H.1
Atkins, A.G.2
-
7
-
-
0033255485
-
Puncture resistance and tensile strength of skin simulants
-
Ankerson J., Birkbeck A.E., Thomson R.D., and Vanezis P. Puncture resistance and tensile strength of skin simulants. Proc Inst Mech Eng, Part H 213 (1999) 493-501
-
(1999)
Proc Inst Mech Eng, Part H
, vol.213
, pp. 493-501
-
-
Ankerson, J.1
Birkbeck, A.E.2
Thomson, R.D.3
Vanezis, P.4
-
8
-
-
33846027302
-
-
Termonia Y. Puncture resistance of fibrous structures. Int J Impact Eng [to appear].
-
-
-
-
10
-
-
13744257872
-
Formation and properties of fluid jet entangled HMPE impact resistant fabrics
-
Russell S.J., Pourmohammadi A., Ezra I., and Jacobs M. Formation and properties of fluid jet entangled HMPE impact resistant fabrics. Comp Sci Technol 65 (2005) 899-907
-
(2005)
Comp Sci Technol
, vol.65
, pp. 899-907
-
-
Russell, S.J.1
Pourmohammadi, A.2
Ezra, I.3
Jacobs, M.4
-
11
-
-
0037295882
-
Slow penetration of ballistic fabrics
-
Erlich D.C., Shockey D.A., and Simons J.W. Slow penetration of ballistic fabrics. Text Res J 73 2 (2003) 179-184
-
(2003)
Text Res J
, vol.73
, Issue.2
, pp. 179-184
-
-
Erlich, D.C.1
Shockey, D.A.2
Simons, J.W.3
-
12
-
-
0030110829
-
Needle puncture resistance of surgical gloves, finger guards, and glove liners
-
Leslie L.F., Woods J.A., Thacker J.G., Morgan R.F., McGregor W., and Edlich R.F. Needle puncture resistance of surgical gloves, finger guards, and glove liners. J Biomed Mater Res (Appl Biomater) 33 (1996) 41-46
-
(1996)
J Biomed Mater Res (Appl Biomater)
, vol.33
, pp. 41-46
-
-
Leslie, L.F.1
Woods, J.A.2
Thacker, J.G.3
Morgan, R.F.4
McGregor, W.5
Edlich, R.F.6
-
13
-
-
0030441989
-
Puncture protection of geomembranes, part III: examples
-
Koerner R.M., Wilson-Fahmy R.F., and Narejo D. Puncture protection of geomembranes, part III: examples. Geosynth Int 3 5 (1996) 655-670
-
(1996)
Geosynth Int
, vol.3
, Issue.5
, pp. 655-670
-
-
Koerner, R.M.1
Wilson-Fahmy, R.F.2
Narejo, D.3
-
14
-
-
0030441988
-
Puncture protection of geomembranes, part II: experimental
-
Narejo D., Koerner R.M., and Wilson-Fahmy R.F. Puncture protection of geomembranes, part II: experimental. Geosynth Int 3 5 (1996) 629-653
-
(1996)
Geosynth Int
, vol.3
, Issue.5
, pp. 629-653
-
-
Narejo, D.1
Koerner, R.M.2
Wilson-Fahmy, R.F.3
-
15
-
-
0030437627
-
Puncture protection of geomembranes, part I: theory
-
Wilson-Fahmy R.F., Narejo D., and Koerner R.M. Puncture protection of geomembranes, part I: theory. Geosynth Int 3 5 (1996) 605-628
-
(1996)
Geosynth Int
, vol.3
, Issue.5
, pp. 605-628
-
-
Wilson-Fahmy, R.F.1
Narejo, D.2
Koerner, R.M.3
-
16
-
-
0032193041
-
Puncture resistance of pre-strained geotextiles and its relation to uniaxial tensile strain at failure
-
Ghosh T.K. Puncture resistance of pre-strained geotextiles and its relation to uniaxial tensile strain at failure. Geotext Geomembr 16 5 (1998) 293-302
-
(1998)
Geotext Geomembr
, vol.16
, Issue.5
, pp. 293-302
-
-
Ghosh, T.K.1
-
18
-
-
0032099677
-
Viscoelastic effects in cutting of elastomers by a sharp object
-
Cho K., and Lee D. Viscoelastic effects in cutting of elastomers by a sharp object. J Polym Sci: Part B, Polym Phys 36 (1998) 1283-1291
-
(1998)
J Polym Sci: Part B, Polym Phys
, vol.36
, pp. 1283-1291
-
-
Cho, K.1
Lee, D.2
-
20
-
-
33845994231
-
-
Lara J, Masse S. Evaluating the cutting resistance of protective clothing materials. In: Kalev Kuklane, Ingvar Holmer, editors. Ergonomics of protective clothing. Proceedings of first European conference on protective clothing. Stockholm, Sweden; May 7-10, 2000. p. 145-9.
-
-
-
-
21
-
-
0029712188
-
-
Lara J, Turcot D, Daigle R, Boutin J. New test method to evaluate the cut resistance of glove materials. ASTM Special Technical Publication, vol. 1237; 1996. p. 23-31.
-
-
-
-
22
-
-
0029712187
-
-
Lara J, Turcot D, Daigle R, Payot F. Comparison of two methods to evaluate the resistance of protective gloves to cutting by sharp blades. ASTM Special Technical Publication, vol. 1237; 1996. p. 32-42.
-
-
-
-
23
-
-
0141923361
-
Test for measuring cut resistance of yarns
-
Shin H.S., Erlich D.C., and Shockey D.A. Test for measuring cut resistance of yarns. J Mater Sci 38 (2003) 3603-3610
-
(2003)
J Mater Sci
, vol.38
, pp. 3603-3610
-
-
Shin, H.S.1
Erlich, D.C.2
Shockey, D.A.3
-
24
-
-
0032657664
-
Cut resistant fiber and textiles for enhanced safety and performance in industrial and commercial applications
-
LaNieve L., and Williams R.S. Cut resistant fiber and textiles for enhanced safety and performance in industrial and commercial applications. Mater Technol 14 1 (1999) 7-9
-
(1999)
Mater Technol
, vol.14
, Issue.1
, pp. 7-9
-
-
LaNieve, L.1
Williams, R.S.2
-
25
-
-
0024613315
-
Shear-thickening ("dilatancy") in suspensions of nonaggregating solid particles dispersed in Newtonian liquids
-
Barnes H.A. Shear-thickening ("dilatancy") in suspensions of nonaggregating solid particles dispersed in Newtonian liquids. J Rheol 33 (1989) 329-366
-
(1989)
J Rheol
, vol.33
, pp. 329-366
-
-
Barnes, H.A.1
-
26
-
-
0035439015
-
The effects of interparticle interactions and particle size on reversible shear thickening: hard-sphere colloidal dispersions
-
Maranzano B.J., and Wagner N.J. The effects of interparticle interactions and particle size on reversible shear thickening: hard-sphere colloidal dispersions. J Rheol 45 (2001) 1205-1222
-
(2001)
J Rheol
, vol.45
, pp. 1205-1222
-
-
Maranzano, B.J.1
Wagner, N.J.2
-
27
-
-
0038199575
-
Dynamic properties of shear thickening colloidal suspensions
-
Lee Y.S., and Wagner N.J. Dynamic properties of shear thickening colloidal suspensions. Rheol Acta 42 (2003) 199-208
-
(2003)
Rheol Acta
, vol.42
, pp. 199-208
-
-
Lee, Y.S.1
Wagner, N.J.2
-
28
-
-
58149323876
-
Optical measurement of the contributions of colloidal forces to the rheology of concentrated suspensions
-
Bender J.W., and Wagner N.J. Optical measurement of the contributions of colloidal forces to the rheology of concentrated suspensions. J Colloid Interf Sci 172 (1995) 171-184
-
(1995)
J Colloid Interf Sci
, vol.172
, pp. 171-184
-
-
Bender, J.W.1
Wagner, N.J.2
-
29
-
-
0037045202
-
Flow-small angle neutron scattering measurements of colloidal dispersion microstructure evolution through the shear thickening transition
-
Maranzano B.J., and Wagner N.J. Flow-small angle neutron scattering measurements of colloidal dispersion microstructure evolution through the shear thickening transition. J Chem Phys 117 (2002) 10291-10302
-
(2002)
J Chem Phys
, vol.117
, pp. 10291-10302
-
-
Maranzano, B.J.1
Wagner, N.J.2
-
30
-
-
36549092859
-
The rheology of Brownian suspensions
-
Bossis G., and Brady J.F. The rheology of Brownian suspensions. J Chem Phys 91 (1989) 1866-1874
-
(1989)
J Chem Phys
, vol.91
, pp. 1866-1874
-
-
Bossis, G.1
Brady, J.F.2
-
31
-
-
0002905346
-
Shear thickening and order-disorder effects in concentrated colloids at high shear rates
-
Catherall A.A., Melrose J.R., and Ball R.C. Shear thickening and order-disorder effects in concentrated colloids at high shear rates. J Rheol 44 (2000) 1-25
-
(2000)
J Rheol
, vol.44
, pp. 1-25
-
-
Catherall, A.A.1
Melrose, J.R.2
Ball, R.C.3
-
32
-
-
33845977197
-
-
Lee YS, Wetzel ED, Egres RG, Jr., Wagner NJ. Advanced body armor utilizing shear thickening fluids. In: Proceedings of the 23rd Army science conference, Orlando, FL; December 2-5, 2002.
-
-
-
-
33
-
-
0041696617
-
The ballistic impact characteristics of Kevlar woven fabrics impregnated with a colloidal shear thickening fluid
-
Lee Y.S., Wetzel E.D., and Wagner N.J. The ballistic impact characteristics of Kevlar woven fabrics impregnated with a colloidal shear thickening fluid. J Mater Sci 38 (2003) 2825-2833
-
(2003)
J Mater Sci
, vol.38
, pp. 2825-2833
-
-
Lee, Y.S.1
Wetzel, E.D.2
Wagner, N.J.3
-
34
-
-
84906660009
-
-
Decker MJ, Egres RG, Wetzel ED, Wagner NJ. Low velocity ballistic properties of shear thickening fluid (STF)-fabric composites. In: Proceedings of the 22nd international symposium on Ballistics. Vancouver, BC; November 14-18, 2005.
-
-
-
-
35
-
-
13144282732
-
Evaluation of test regimes for stab-resistant body armour
-
Walker C.A., Gray T.G.F., Nicol A.C., and Chadwick E.K.J. Evaluation of test regimes for stab-resistant body armour. Proc Inst Mech Eng, Part L (J Mater: Des Appl) 218 L4 (2004) 355-361
-
(2004)
Proc Inst Mech Eng, Part L (J Mater: Des Appl)
, vol.218
, Issue.L4
, pp. 355-361
-
-
Walker, C.A.1
Gray, T.G.F.2
Nicol, A.C.3
Chadwick, E.K.J.4
-
36
-
-
18844429487
-
The effect of knife handle shape on stabbing performance
-
Horsfall I., Watson C., Champion S., Prosser P., and Ringrose T. The effect of knife handle shape on stabbing performance. Appl Ergon 36 4 (2005) 505-511
-
(2005)
Appl Ergon
, vol.36
, Issue.4
, pp. 505-511
-
-
Horsfall, I.1
Watson, C.2
Champion, S.3
Prosser, P.4
Ringrose, T.5
-
39
-
-
0030607263
-
Kinematics of four methods of stabbing: a preliminary study
-
Miller S.A., and Jones M.D. Kinematics of four methods of stabbing: a preliminary study. Forensic Sci Int 82 (1996) 183-190
-
(1996)
Forensic Sci Int
, vol.82
, pp. 183-190
-
-
Miller, S.A.1
Jones, M.D.2
-
41
-
-
0016785156
-
The dynamics of stab wounds
-
Knight B. The dynamics of stab wounds. Forensic Sci 6 (1975) 249-255
-
(1975)
Forensic Sci
, vol.6
, pp. 249-255
-
-
Knight, B.1
-
42
-
-
33846022539
-
-
Standard test method for protective clothing material resistance to puncture. ASTM Standard F1342-05; 2005.
-
-
-
-
43
-
-
33845980932
-
-
Standard test method for index puncture resistance of geotextiles, geomembranes, and related products. ASTM Standard D4833-00e1; 2002.
-
-
-
-
44
-
-
33845984757
-
-
Standard test method for large scale hydrostatic puncture testing of geosynthetics. ASTM Standard D5514-94; 2001.
-
-
-
-
45
-
-
33846006020
-
-
Standard test method for measuring cut resistance of materials used in protective clothing. ASTM Standard F1790-05; 2005.
-
-
-
-
46
-
-
33846010590
-
-
Protective clothing - mechanical properties - determination of resistance to cutting by sharp objects. ISO Standard 13997:1999.
-
-
-
-
47
-
-
33845974296
-
-
Stab resistance of personal body armor. national institute of justice standard 0115.00; 2000.
-
-
-
-
48
-
-
0036642650
-
Perforation of high-strength double-ply fabric system by varying shaped projectiles
-
Lim C.T., Tam V.B.C., and Cheong C.H. Perforation of high-strength double-ply fabric system by varying shaped projectiles. Int J Impact Eng 27 (2002) 577-591
-
(2002)
Int J Impact Eng
, vol.27
, pp. 577-591
-
-
Lim, C.T.1
Tam, V.B.C.2
Cheong, C.H.3
-
49
-
-
0037106834
-
Fibrillation of aramid fiber using a vibrating ball mill and evaluation of the degree of fibrillation
-
Hashimoto A., Satoh M., Iwasaki T., and Morita M. Fibrillation of aramid fiber using a vibrating ball mill and evaluation of the degree of fibrillation. J Mater Sci 37 (2002) 4013-4017
-
(2002)
J Mater Sci
, vol.37
, pp. 4013-4017
-
-
Hashimoto, A.1
Satoh, M.2
Iwasaki, T.3
Morita, M.4
-
50
-
-
0032628713
-
Failure mechanisms of yarns subjected to ballistic impact
-
Carr D.J. Failure mechanisms of yarns subjected to ballistic impact. J Mater Sci Lett 18 (1999) 585-588
-
(1999)
J Mater Sci Lett
, vol.18
, pp. 585-588
-
-
Carr, D.J.1
-
51
-
-
0034140654
-
The transverse compression of PPTA fibers. Part II: fiber transverse structure
-
Singletary J., Davis H., Song Y., Ramasubramanian M.K., and Knoff W. The transverse compression of PPTA fibers. Part II: fiber transverse structure. J Mater Sci 35 (2000) 583-592
-
(2000)
J Mater Sci
, vol.35
, pp. 583-592
-
-
Singletary, J.1
Davis, H.2
Song, Y.3
Ramasubramanian, M.K.4
Knoff, W.5
-
52
-
-
18344419595
-
Mechanical properties of Kevlar KM2 single fiber
-
Cheng M., Chen W., and Weerasooriya T. Mechanical properties of Kevlar KM2 single fiber. J Eng Mater Technol 127 (2005) 197-203
-
(2005)
J Eng Mater Technol
, vol.127
, pp. 197-203
-
-
Cheng, M.1
Chen, W.2
Weerasooriya, T.3
-
53
-
-
33845973919
-
-
Egres RG, Lee YS, Kirkwood JE, Kirkwood KM, Wetzel ED, Wagner NJ. Novel flexible body armor utilizing shear-thickening fluid (STF) composites. In: Proceedings of the 14th international conference on composite materials. San Diego, CA; July 14-18, 2003.
-
-
-
|