Biomechanical testing of the proximal femoral epiphysis: Intact and implanted condition

Proceedings of 8th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA2006

Volumn 2006, Issue , 2006, Pages

  Cristofolini, Luca ^a,b   Pallini, Francesco ^a   Schileo, Enrico ^a,c   Juszczyk, Mateusz ^a,b   Varini, Elena ^a,b   Martelli, Saulo ^a,b   Taddei, Fulvia ^a  

^a RIZZOLI ORTHOPAEDIC INSTITUTE   (Italy)

^b UNIVERSITY OF BOLOGNA   (Italy)

^c UNIVERSITY OF PADOVA   (Italy)

Author keywords

Biomechanical test; Epiphyseal prosthesis; Finite element model; Proximal femur; Stress distribution; Validation

Indexed keywords

BONE; IMPLANTS (SURGICAL); PROSTHETICS; STRESS CONCENTRATION;

BIOMECHANICAL TEST; EPIPHYSEAL PROSTHESIS; FINITE ELEMENT MODEL; PROXIMAL FEMUR;

BIOMECHANICS;

EID: 33845890823     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/esda2006-95187     Document Type: Conference Paper

References (39)

1. Bell, R. S., Schatzker, J., Fornasier, V. L. and Goodman, S. B., 1985, "A study of implant failure in the Wagner resurfacing arthroplasty" J Bone Joint Surg Am, 67(8), pp. 1165-1175.
2. Head, W. C., 1981, "Wagner surface replacement arthroplasty of the hip. Analysis of fourteen failures in forty-one hips" J Bone Joint Surg Am, 63(3), pp. 420-427.
3. Howie, D. W., Campbell, D., McGee, M. and Cornish, B. L., 1990, "Wagner resurfacing hip arthroplasty. The results of one hundred consecutive arthroplasties after eight to ten years" J Bone Joint Surg Am, 72(5), pp. 708-714.
4. Ritter, M. A. and Gioe, T. J., 1986, "Conventional versus resurfacing total hip arthroplasty. A long-term prospective study of concomitant bilateral implantation of prostheses" j bone Joint Surg Br, 68(2), pp. 216-225.
5. Freeman, M. A. and Bradley, G. W., 1983, "ICLH surface replacement of the hip. An analysis of the first 10 years" j bone Joint Surg Br, 65(4), pp. 405-411.
6. Amstutz, H. C., Dorey, F. and O'Carroll, P. F., 1986, "THARIES resurfacing arthroplasty. Evolution and long-term results" Clin Orthop Relat Res, 213(pp. 92-114.
7. Kim, W. C., Grogan, T., Amstutz, H. C. and Dorey, 1987, "Survivorship comparison of THARIES and conventional hip arthroplasty in patients younger than 40 years old" Clin Orthop Relat Res, 214(pp. 269-277.
8. Amstutz, H. C., Beaule, P. E., Dorey, F. J, Le Duff, M. J., Campbell, P. A. and Gruen, T. A., 2004, "Metal-on-metal hybrid surface arthroplasty: two to six-year follow-up study" J Bone Joint Surg Am, 86-A(1), pp. 18-39.
9. Daniel, J., Pynsent, P. B. and McMinn, D. J., 2004, "Metal-on-metal resurfacing of the hip in patients under the age of 55 years with osteoarthritis" j bone Joint Surg Br, 86(2), pp. 177-184.
10. Viceconti, M., Cristofolini, L., Baleani, M. and Toni, A., 2001, "Pre-clinical validation of a new partially cemented femoral prosthesis by synergetic use of numerical and experimental methods" J. Biomechanics, 34(6), pp. 723-731.
11. Markolf, K. L. and Amstutz, H. C., 1980, "Mechanical strength of the femur following resurfacing and conventional total hip replacement procedures" Clin Orthop Relat Res, 147(pp. 170-180.
12. Amstutz, H. C., Kim, W. C., O'Carroll, P. F. and Kabo, J. M., 1986, "Canine porous resurfacing hip arthroplasty. Longterm results" Clin Orthop Relat Res, 207(pp. 270-289.
13. Amstutz, H. C., O'Carroll, P. F., Kabo, J. M. and Kim, W. C., 1985, "Comparative experience with canine and human cementless acetabular components" Hip, pp. 235-249.
14. Kim, W. C., Amstutz, H. C., O'Carroll, P. F., Hedley, A. K., Coster, I. and Schmidt, I. J. H. P-. 1984, "Porous ingrowth in canine resurfacing hip arthroplasty: analysis of results with up to a 2-year follow-up" Hip, 211), pp. 43.
15. Anderson, I. A., Bowden, M. and Wyatt, T. P., 2005, "Stress analysis of hemispherical ceramic hip prosthesis bearings" Med Eng Phys, 27(2), pp. 115-122.
16. de Waal Malefijt, M. C. and Huiskes, R., 1993, "A clinical, radiological and biomechanical study of the TARA hip prosthesis" Arch Orthop Trauma Surg, 112(5), pp. 220-225.
17. Lengsfeld, M., Weiss, H. and Kienapfel, H., 1992, "[Morphological and numerical studies of the stress compatibility of patella implants]" Biomed Tech (Berl), 37(10), pp. 222-229.
18. Shybut, G. T., Askew, M. J., Hori, R. Y. and Stulberg, S. D., 1979, "Computational stress analysis of cup replacement hip arthroplasty" Trans Am Soc Artif Intern Organs, 25 (pp. 24-26.
19. Thompson, M. S., Northmore-Ball, M. D., Tanner, K. E. and 237-45, I. P., 2002, "Effects of acetabular resurfacing component material and fixation on the strain distribution in the pelvis" Proc Inst Mech Eng [H], 216(4), pp. 237-245.
20. Udofia, I. J., Yew, A. and Jin, Z. M., 2004, "Contact mechanics analysis of metal-on-metal hip resurfacing prostheses" Proc Inst Mech Eng [H], 218(5), pp. 293-305.
21. Weinans, H., Huiskes, R. and Grootenboer, H. J., 1993, "Quantitative analysis of bone reactions to relative motions at implant-bone interfaces" J Biomech, 26(11), pp. 1271-1281.
22. Glyn-Jones, S., Gill, H. S., McLardy-Smith, P. and Murray, D. W., 2004, "Roentgen stereophotogrammetric analysis of the Birmingham hip resurfacing arthroplasty. A two-year study." j bone Joint Surg Br, 86(2), pp. 157-158.
23. Taddei, F., Cristofolini, L., Martelli, S., Gill, H. S. and Viceconti, M., 2005, "Subject-specific finite element models of long bones: An in vitro evaluation of the overall accuracy" J Biomech, 5(pp. 5.
24. Bergmann, G., Deuretzbacher, G., Heller, M., Graichen, F., Rohlmann, A., Strauss, J. and Duda, G. N., 2001, "Hip contact forces and gait patterns from routine activities" J Biomech, 34(7), pp. 859-871.
25. Cristofolini, L., Viceconti, M., Toni, A. and Giunti, A., 1995, "Influence of thigh muscles on the axial strains in a proximal femur during early stance in gait" J Biomech, 28(5), pp. 617-624.
26. Cristofolini, L. and Viceconti, M., 1999, "Towards the standardization of in vitro load transfer investigations of hip prostheses" Journal of Strain Analysis for Engineering Design, 34(1), pp. 1-15.
27. Cristofolini, L., 1997, "A critical analysis of stress shielding evaluation of hip prostheses" Critical Reviews in Biomedical Engineering, 25:4&5(pp. 409-483.
28. Brooks, R. A. and Di Chiro, G., 1976, "Beam hardening in x-ray reconstructive tomography" Phys Med Biol, 21(3), pp. 390-398.
29. Ruff, C. B. and Hayes, W. C., 1983, "Cross-sectional Geometry of Pecos Pueblo Femora and Tibiae - A Biomechanical Investigation: I. Method and General Patterns of Variation" Am. J. Phys. Anthropol., 60(pp. 359-381.
30. Viceconti, M., Toni, A. and Giunti, A., 1992, "Strain gauge analysis of hard tissues: factors influencing measurements" Experimental Mechanics. Technology transfer between high tech engineering and biomechanics, pp. 177-184.
31. Cristofolini, L., Saponara Teutonico, A., Monti, L., Cappello, A. and Toni, A., 2003, "Comparative in vitro study on the long term performance of cemented hip stems: Validation of a protocol to discriminate between "good" and "bad" designs" J. Biomechanics, 36(pp. 1603-1615.
32. Taddei, F., Pancanti, A. and Viceconti, M., 2004, "An improved method for the automatic mapping of computed tomography numbers onto finite element models" Med Eng Phys, 26(1), pp. 61-69.
33. Kalender, W. A., 1992, "A phantom for standardization and quality control in spinal bone mineral measurements by QCT and DXA: Design considerations and specifications" Medical Physics, 19(3), pp. 583-586.
34. Keller, T. S., 1994, "Predicting the compressive mechanical behavior of bone" Journal of Biomechanics, 27(9), pp. 1159-1168.
35. Giddings, V. L., Kurtz, S. M., Jewett, C. W., Foulds, J. R. and Edidin, A. A., 2001, "A small punch test technique for characterizing the elastic modulus and fracture behavior of PMMA bone cement used in total joint replacement" Biomaterials., 22(13), pp. 1875-1881.
36. Besl, P. and McKay, N., 1992, "A method for registration of 3-D shapes" IEEE Transactions on Pattern Analysis and Machine Intelligence, 14(2), pp. 239-256.
37. Popescu, F., Viceconti, M., Grazi, E. and Cappello, A., 2003, "A new method to compare planned and achieved position of an orthopaedic implant" Comput Methods Programs Biomed, 71(2), pp. 117-127.
38. Juszczyk, M., 2005, "Design and validation of a transducer to measure actual force position during in vitro testing of intact and implanted whole femurs" Dept. of Mechanical Engineering, pp. 62.
39. Cristofolini, L., Cappello, A., McNamara, B. and Toni, A., 1996, "A minimal parametric model of the femur to describe axial elastic strain in response to loads" Med Eng Phys, 18(pp. 502-514.