Effect of head surface roughness and sterilization method on wear of uhmwpe acetabular cups: Preliminary hip joint simulator results

Proceedings of 8th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA2006

Volumn 2006, Issue , 2006, Pages

  Jedenmalm, Anneli ^a   Leardini, Walther ^b   Zavalloni, Mara ^b   Affatato, Saverio ^b  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^b RIZZOLI ORTHOPAEDIC INSTITUTE   (Italy)

Author keywords

Hip prostheses; Hip simulator; Roughened femoral heads; Surface roughness; UHMWPE; Wear

Indexed keywords

GAMMA RAYS; HIP PROSTHESES; JOINTS (STRUCTURAL COMPONENTS); LIGHT INTERFERENCE; LUBRICANTS; PROFILOMETRY; PROTEINS; SIMULATORS; WEAR OF MATERIALS;

HIP JOINT SIMULATOR; ROUGHENED FEMORAL HEADS; STERILIZED CUPS;

SURFACE ROUGHNESS;

EID: 33845808362     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/esda2006-95512     Document Type: Conference Paper

References (24)

1. Herberts, P., Kärrholm, J., and Garellick, G., "The Swedish National hip Arthroplasty Register - Annual report 2004", Department of Orthopeadics, Sahlgrenska University Hospital, Göteborg 2005.
2. Mohanty, M., 1996,"Cellular basis for failure of joint prosthesis", Bio Med Mater Eng 6, pp. 165-72.
3. Revell, P. A., Al-Saffar, N., and Kobayashi, A., 1997,"Biological reaction to debris in relation to joint prostheses", Proceedings of the Institution of Mechanical Engineers. Part H. J Eng Med, 211, pp. 187-97.
4. Falez, F., La Cava, F., and Panegrossi, G., 2000, "Femoral prosthetic heads and their significance in polyethylene wear", International Orthopeadics, 24, pp. 126-9.
5. Hall, R. M., Siney, P., Unsworth, A., and Wroblewski, B. M., 1997,"The effect of surface topography of retrieved femoral heads on the wear of UHMWPE sockets", Med. Eng. Phys., 19(8), pp. 711-19.
6. Najjar, D., Bigerelle, M., Migaud, H., and lost, A., 2005, "Identification of scratch mechanisms on a retrieved metallic femoral head", Wear, 258, pp. 240-50.
7. Jasty, M., Bragdon, C. R., Lee, K., Hanson, A., and Harris, W. H., 1994,"Surface damage to cobalt-chrome femoral-head prostheses", J Bone Joint Surg [Br], 76B, pp. 73-7.
8. Wroblewski, B. M., Revision Surgery in Total Hip Arthroplasty. London: Springer-Verlag, 1990.
9. Wang, A., Polineni, V. K., Stark, C., and Dumbleton, J. H., 1998,"Effect of femoral head surface roughness on the wear of UHMWPE acetabular cups", The Journal of Arthroplasty, 13(6), pp. 615-20.
10. McKellop, H., Shen, F.-w., DiMaio, W., and Lancaster, J. G., 1999, "Wear of gamma-crosslinked polyethylene acetabular cups against roughened femoral balls", Clinical Orthopeadics and Related Research (369), pp. 73-82.
11. Affatato, S., Bersaglia, G., Rocchi, M., Taddei, P., Fagnano, C., and Toni, A., 2005,"Wear behaviour of cross-linked polyethylene assessed in vitro under severe conditions", Biomaterials, 26, pp. 3259-3267.
12. Kurtz, S. M., Rimnac, C. M., and Bartel, D. L., 1997,"Degradation rate of UHMWPE", J Bone Joint Surg Am, 15, pp. 57-61.
13. Rimnac, C. M., Klein, R. W., Betts, F., and Wright, T. M., 1994, "Post-irradiation aging of ultra-high molecular weight polyethylene", J Bone Joint Surg Am, 76, pp. 1052-6.
14. Grood, E. S., Sharstri, R., and Hopson, C. N., 1982,"Analysis of retrieved implants: cristallinity changes in ultra high molecular weight polyethylene", J Biomed Mater Res, 16, pp. 399-405.
15. Kurtz, S. M., Muratoglu, O. K., Evans, M., and Edidin, A. A., 1999,"Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty ", Biomaterials, 20, pp. 1659-1688.
16. Bargmann, L. S., Bargmann, B. C., Collier, J. P., Currier, B. H., and Mayor, M. B., 1999,"Current Sterilization and Packaging Methods for Polyethylene", Clinical Orthopaedics & Related Research, 369, pp. 49-58.
17. Ries, M. D., Weaver, K., Rose, R. M., Gunther, J., Sauer, W., and Beals, N., 1996,"Fatigue Strength of Polyethylene After Sterilization by Gamma Irradiation or Ethylene Oxide", Clinical Orthopaedics & Related Research, 333, pp. 87-95.
18. Kabo, J. M., Gebhard, J. S., Loren, G., and Amstutz, H. C., 1993,"In vivo wear of polyethylene acetabular components", J Bone Joint Surg Br, 75-B(2), pp. 254-258.
19. Haraguchi, K., Sugano, N., and Nishii, T., 2001,"Influence of polyethylene and femoral head surface quality on wear: a retrieval study", International Orthopeadics, 25(1), pp. 29-34.
20. Saikko, V., Calonius, O., and Keränen, J., 2002,"Wear of conventional and cross-linked UHMWPE acetabular cups against polished and roughened CoCr femoral heads in a biaxial hip simulator", Biomed Mater Res (Appl Biomater), 63, pp. 848-853.
21. Brummit, K., Hardaker, C. S., and McCullagh, P. J., 1996,"Effect of counterface material on the characteristics of retrieved uncemented cobalt-chromium and titanium alloy total hip replacements", Proc Inst Mech Eng [H], 210, pp. 191-5.
22. Barbour, P. S. M., Stone, M. H., and Fisher, J., 2000,"A hip joint simulator study using new and physiologically scratched femoral heads with UHMWPE acetabular cups", Proc Instn Mech Engrs: Part H, 214, pp. 569-76.
23. Bowsher, J. G., 2001,"A hip simulator study of the influence of patient activity level on the wear of crosslinked polyethylene under smooth and roughened femoral conditions ", Wear, 250, pp. 167-79.
24. Clarke, I. C., Starkebaum, W., Hosseinian, A., McGuire, P., Okuda, R., Salovey, R., and Young, R., 1985,"Fluid-sorption phenomena in sterilized polyethylene acetabular prostheses", Biomaterials, 6, pp. 184-188.