Location and magnitude of heat sources in solid oxide fuel cells

Proceedings of 4th International ASME Conference on Fuel Cell Science, Engineering and Technology, FUELCELL2006

Volumn 2006, Issue , 2006, Pages

  Fischer, Katharina ^a   Seume, Joerg R ^a  

^a LEIBNIZ UNIVERSITY HANNOVER   (Germany)

Author keywords

Heat generation; Modeling; SOFC; Solid oxide fuel cell

Indexed keywords

ANODES; ELECTRIC CURRENTS; ELECTRIC POWER DISTRIBUTION; ELECTROLYTES; HEATING; OXIDATION; SEEBECK EFFECT; STRESSES; TEMPERATURE DISTRIBUTION;

DISCRETIZED MODELS; HEAT GENERATION; HEAT SOURCES; SEEBECK COEFFICIENTS;

SOLID OXIDE FUEL CELLS;

EID: 33845770805     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/fuelcell2006-97167     Document Type: Conference Paper

References (35)

1. Ferguson, J.R., Fiard, J.M., and Herbin, R., 1996, "Three- dimensional numerical simulation for various geometries of solid oxide fuel cells", J. Power Sources, 58(2), pp. 109-122
2. Gemmen, R.S., Rogers, W.A., and Prinkey, M.T., 2000, "Application of a Computational Fluid Dynamics Code to Fuel Cells Integrated SOFC Fuel Cell and Post Oxidizer", Technical Notes TN128, Newport Beach
3. Yakabe, H., Ogiwara, T., Hishinuma, M., and Yasuda, I., 2001, "3-D model calculation for planar SOFC", J. Power Sources, 102(1-2), pp.144-154
4. Rao, A.D., and Samuelsen, G.S., 2002, "Analysis Strategies for Tubular Solid Oxide Fuel Cell Based Hybrid Systems", J. Eng. Gas Turb. Power,124(3), pp. 503-509
5. Trasino, F., Magistri, L., and Costamagna, P., 2004, "Transient analysis of Solide Oxide Fuel Cell Hybrids. Part A: Fuel Cell Models", ASME GT2004-53842, ASME Turbo Expo 2004, Vienna, Austria
6. Stiller, C., Thorud, B., Seljebø, S., Mathisen, O., Karoliussen, H., and Bolland, O., 2005, "Finite-volume modeling and hybrid-cycle performance of planar and tubular solid oxide fuel cells", J.Power Sources, 141(2), pp. 227-240
7. Xue, X., Tang, J., Sammes, N., and Du, Y., 2005, "Dynamic modeling of single tubular SOFC combining heat/mass transfer and electrochemical reaction effects", J. Power Sources, 142(1-2), pp. 211-222
8. VanderSteen, J.D.J., Kenney, B., Pharoah, J.G., Karan, K., 2004, "Mathematical Modelling of the Transport Phenomena and the Chemical/Electrochemical Reactions in Solid Oxide Fuel Cells: A Review", Canadian Hydrogen and Fuel Cells Conference
9. Ito, Y., Foulkes, F.R., and Yoshizawa, S., 1982, "Energy Analysis of a Steady-State Electrochemical Reactor", J. Electrchem. Soc., 129(9), pp. 1936-1943
10. Ito, Y., Kaiya, H., Yoshizawa, S., Ratkje, S.K., and Forland, T., 1984, "Electrode Heat Balances of Electrochemical Cells", J. Electrchem. Soc., 131(11), pp. 2504-2509
11. Førland, T., and Ratkje, S.K., 1980, "Entropy Production by Heat, Mass, Charge Transfer and Specific Chemical Reactions", Electrochimica Acta, 25, pp. 157-163
12. Hamann, C.H., Vielstich, W., 1998, Elektrochemie, 3rd Ed., Wiley-VCH
13. Rechenauer, Ch., and Achenbach, E., 1996, "Dreidimensionale mathematische Modellierung des stationären und instationären Verhaltens oxidkeramischer Hochtemperatur-Brennstoffzellen", Dissertation, JÜL-2752, RWTH Aachen
14. 0.15 Electrolyte Thermocell", J. Electrochem. Soc., 115(5), pp. 497-501
15. Ratkje, S.K., and Tomii, Y., 1993, "Transported Entropy in Zirconia with 3 to 12 Mole Percent Yttria", J. Electrochem. Soc., 140(1), pp. 59-66
16. Takehara, Z, Kanamura, K., and Yoshioka, S., 1989, "Thermal Energy Generated by Entropy Change in Solid Oxide Fuel Cell", J. Electrochem. Soc., 136(9), pp. 2506-2511
17. Ratkje, S.K., and Mailer-Holst, S., 1993, "Exergy Efficiency and Local Heat Production in Solid Oxide Fuel Cells", Electrochimica Acta, 38(2/3), pp. 447-453
18. th Ed., McGraw-Hill
19. Besserte, N.F., Borglum, B.P., Schiehl, H., and Schmidt, D.S., 2001, "Siemens SOFC Technology of the Way to Economic Competitiveness", Power Journal, Magazine of the Siemens Power Generation Group, http://www.powergeneration.siemens.com/download/pool/2_PJ_1_01_e_Bessette_neu. pdf
20. Singhal, S.C., 1999, "Progress in Solid Oxide Fuel Cell Technology", Electrochem. Soc. Proc., 99(19)
21. Singhal, S.C., 2000, "Advances in Solid Oxide Fuel Cell Technology", Solid State Ionics, 135
22. Samuelsen, S., 2000, "Analyses and Technology Transfer for Fuel Cell Systems", Consultant Report, California Energy Commission
23. Thorud, B., Bolland, O., and Alvestad, T., 2001, "Integration of Pressurized High Temperature Fuel Cells in Gas Turbine Cycles", Dept. of Thermal Energy and Hydropower, NTNU, Norway
24. Bossel, U.C., 1992, "Facts and Figures. Final Report on SOFC Data", International Energy Agency
25. Selimovic, A., 2002, "Modelling of Solid Oxide Fuel Cells Applied to the Analysis of Integrated Systems with Gas Turbines", Ph.D. Thesis, Lund University, Sweden
26. Ivers-Tiffée, E., Herbstritt, D., Müller, A., and Weber, A., 2000, "Electrode Reaction and Electrochemical Performance - Materials and Technology Development for Low Temperature SOFC", 41st Battery Symposium, Nagoya
27. Hirschenhofer, J.H., Englemann.R.R., and Stauffer, D.B., 1996, Fuel Cell Handbook, 5th Ed., US Department of Energy
28. Hu, W., Guan, H., Sun, X., Li, S., Fukumoto, M., and Okane, I., 1998, "Electrical and Thermal Conductivities of Nickel-Zirconia Cermets", J. Am. Ceram. Soc., 81
29. Webb, S.W., and Pruess, K., 2003, "The Use of Pick's Law for Modeling Trace Gas Diffusion in Porous Media", Transport in Porous Media, 51, pp. 327-341
30. nd Ed., John Wiley & Sons Inc., New York
31. nd Ed., McGraw-Hill
32. Besserte N.F., Wepfer, W.J., and Winnick, J., 1995, "A Mathematical Model of a Solid Oxide Fuel Cell", J. Electrochem. Soc., 142(11), pp. 3792-3800
33. Campanari, S., 2001, "Thermodynamic Model and Parametric Analysis of a Tubular SOFC Module", J. Power Sources, 92, pp. 26-34
34. Kanamura, K., and Takehara, Z., 1993, "Temperature and Thermal Stress Distribution in a Tubular Solid Oxide Fuel Cell", Bull. Chem. Soc. Jpn., 66, pp. 2797-2803
35. Nishida, K., Takagi, T., and Kinoshita, S., 2003, "Analysis of Electrochemical Performance and Exergy Loss in Solid Oxide Fuel Cell", GT2003-38094, Proc. of ASME Turbo Expo 2003