Control of welding residual stress for ensuring integrity against fatigue and stress-corrosion cracking

Nuclear Engineering and Design

Volumn 237, Issue 2, 2007, Pages 107-123

  Mochizuki, Masahito ^a  

^a OSAKA UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

FATIGUE OF MATERIALS; SHOT PEENING; STRESS CORROSION CRACKING; WELDING;

POST WELD TREATMENT; WATER JET PEENING; WELDED COMPONENTS;

RESIDUAL STRESSES;

EID: 33845765222     PISSN: 00295493     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.nucengdes.2006.05.006     Document Type: Article

References (78)

1. Almen J.O., and Black P.H. Residual Stresses and Fatigue in Metals (1963), McGraw-Hill Book Company, Inc., New York
2. Al-Obaid Y.F. A rudimentary analysis of improving fatigue life of metals by shot peening. Trans. ASME, J. Appl. Mech. 108 (1986) 307-312
3. Alpsten G.A., and Tall L. Residual stresses in heavy welded shapes. Weld. J. 49 3 (1970) 93s-105s
4. Aoki S., Nishimura T., Hiroi T., and Amano Y. Reduction of residual stress of welded joint using vibration. Trans. Jpn. Soc. Mech. Eng. 61C (1995) 4800-4804 (in Japanese)
5. Argyris J.H., and Doltsinis J.St. On the natural formulation and analysis of large deformation coupled thermomechanical problems. Comp. Methods Appl. Mech. Eng. 25 (1981) 195-253
6. Beghini M., Bertini L., and Vitale E. Fatigue crack growth in residual stress fields, experimental results and modelling. Fatigue Fracture Eng. Mater. Struct. 17 (1994) 1433-1444
7. Benson L.E., and Watson S.J. Effect of preheating on residual stresses in mild-steel weld. Br. Weld. J. 2 (1955) 372-376
8. Boulton N.S., and Lance Martin H.E. Residual stresses in arc welded plates. Proc. Inst. Mech. Eng. 133 (1936) 295-347
9. Brown S., and Song H. Finite element simulation of welding of large structures. Trans. ASME, J. Eng. Ind. 114 (1992) 441-451
10. Bru D., Devaux J., Bergheau J.M., and Pont D. Influence of material properties at high temperatures on the modelling of welding residual stress and deformation state. In: Cerjak H. (Ed). Mathematical Modelling of Weld Phenomena vol. 3 (1997), The Institute of Metals, London 456-463
11. Buchalet C.B., and Bamford W.H. Stress intensity factor solutions for continuous surface flaws in reactor pressure vessels, mechanics of crack growth. ASTM STP 590 (1976) 385-402
12. Burak Ya.I., Romanchuk Ya.P., Kazimirov A.A., and Morgun V.P. Selection of the optimum fields for preheating plates before welding. Autom. Weld. 5 (1979) 5-9
13. Burdekin F.M. Local stress relief of circumferential butt welds in cylinders. Br. Weld. J. 10 (1963) 483-490
14. Clarke W.L., and Gordon G.M. Investigation of stress corrosion cracking susceptibility of Fe-Ni-Cr alloys in nuclear reactor water environments. Corrosion 29 (1973) 1-12
15. Daniewicz S.R., Collins J.A., and Houser D.R. An elastic-plastic analytical model for predicting fatigue crack growth in arbitrary edge-cracked two-dimensional geometries with residual stress. Int. J. Fatigue 16 (1994) 123-133
16. Dong P., Hong J.K., Zhang J., Rogers P., Bynum J., and Shah S. Effects of repair weld residual stresses on wide-panel specimens loaded in tension. Trans. ASME, J. Pressure Vessel Technol. 120 (1998) 122-128
17. Enomoto, K., Otaka, M., Kurosawa, K., Saito, H., Tsujimura, H., Tamai, Y., Uraki K., Mochizuki, M., 1994. Method of and apparatus for water jet peening, United States Patent, No. 5305361.
18. Fidler R. The effect of time and temperature on residual stresses in austenitic welds. Trans. ASME, J. Pressure Vessel Technol. 104 (1982) 210-214
19. Friedman E. Thermomechanical analysis of the welding process using the finite element method. Trans. ASME, J. Pressure Vessel Technol. 97 (1975) 206-212
20. Glinka G. Effect of residual stress on fatigue crack growth in steel weldments under constant and variable amplitude loads, fracture mechanics. ASTM STP 677 (1979) 198-214
21. Greene T.W., and Holzbaur A.A. Controlled low-temperature stress relieving. Weld. J. 25 3 (1946) 171s-185s
22. Guan Q., Guo D.L., and Reggatt R.H. Low stress non-distortion (LSND) welding-a new technique for thin materials. Weld. World 33 (1994) 160-167
23. Guan Q., Zhang C.X., and Guo D.L. Dynamic control of welding distortion by moving spot heat Sink. Weld. World 33 (1994) 308-312
24. Hashish M. Characteristics of surfaces machined with abrasive waterjets. Trans. ASME, J. Eng. Mater. Technol. 113 (1991) 354-359
25. Hirano K., Enomoto K., Mochizuki M., Hayashi M., Hayashi E., and Shimizu S. Improvement of residual stress on material surface by water jet peening. Transactions of the 14th International Conference on Structural Mechanics in Reactor Technology, vol. 2. Lyon (1997) 361-368
26. Honda K., Torii T., and Fei Z. Analysis and measurements of residual-stress redistribution due to material removal in a plate. J. Soc. Mater. Sci. Jpn. 37 (1988) 391-397 (in Japanese)
27. Iida K., and Kho Y. Empirical expressions of surface fatigue crack shape. J. Soc. Naval Architects Jpn. 147 (1980) 211-218 (in Japanese)
28. Janosch J.J., and Clergè M. Numerical welding simulation of two pipes-determination of the evolution of residual stresses during proof test pressure. Proceedings of the Pressure Vessels and Piping Conference, vol. 347. ASME, Orlando (1997) 103-113
29. Karlsson C.T., and Josefson B.L. Three-dimensional finite element analysis of temperatures and stresses in a single-pass butt-welded pipe. Trans. ASME, J. Pressure Vessel Technol. 112 (1990) 76-84
30. Karlsson L., Lindgren L.-E., Jonsson M., Josefson L., and Oddy A. Modeling of residual stresses and distortion development. In: Cerjak H. (Ed). Mathematical Modelling of Weld Phenomena vol. 3 (1997), The Institute of Metals, London 571-589
31. Kawai S., and Koibuchi K. Effects of ground and peened on fatigue strength of welded joint under high mean stresses. J. Jpn. Weld. Soc. 44 (1975) 588-595 (in Japanese)
32. Kihara, H., Masubuchi, K., 1954. Studies on the Shrinkage and Residual Welding Stress of Constrained Fundamental Joint. Reports of Transportation Technical Research Institute of Japan, No. 7 (in Japanese).
33. Kumose T., Yoshida T., Abe T., and Onoue H. Prediction of angular distortion caused by one-pass fillet welding. Weld. J. 33 (1954) 945s-956s
34. Kuniya J., Masaoka I., Sasaki R., and Kirihara S. Effects of surface finishing on stress corrosion cracking of austenitic stainless steels in high temperature water. J. Mater. Energy Syst. 1 (1980) 30-41
35. Leblond J.B., Mottet G., and Devaux J.C. A theoretical and numerical approach to the plastic behavior of steels during phase transformation. J. Mech. Phys. Solid 34 (1986) 395-432
36. Maddox S.J. Fatigue Behavior of Welded Joints, Advances in Fatigue Science and Technology (1989), Ambington Press, Cambridge pp. 539-550
37. Matsuoka K., and Naoi T. Effect of internal pressure on release of residual stresses due to circumferential welds of pipes. J. Jpn. Weld. Soc. 52 (1983) 97-103 (in Japanese)
38. Meguid S.A., and Klair M.S. An examination of the relevance of co-indentation studies to incomplete in shot-peening using the finite element method. J. Mech. Working Technol. 11 (1985) 87-104
39. Michaleris P., Feng Z., and Campbell G. Evaluation of 2D and 3D FEA models for predicting residual stress and distortion. Proceedings of the Pressure Vessels and Piping Conference, vol. 347. ASME, Orlando (1997) 91-102
40. Miyazaki K., Mochizuki M., Kanno S., Hayashi M., Shiratori M., and Yu Q. Analysis of stress intensity factor due to surface crack propagation in residual stress fields caused by welding. JSME Int. J. 45A (2002) 199-207
41. Mochizuki M., Enomoto K., Sakata S., Kurosawa K., Saito H., Tsujimura H., and Ichie K. A study on residual stress improvement by water jet peening. Proceedings of the 5th International Conference on Shot Peening. Oxford (1993) 247-256
42. Mochizuki M., Enomoto K., Okamoto N., Saito H., and Hayashi E. Welding residual stresses at the intersection of a small diameter pipe penetrating a thick plate. Nucl. Eng. Des. 144 (1993) 439-447
43. Mochizuki M., Saito N., Enomoto K., Sakata S., and Saito H. A study on residual stress of butt-welded plate joint using inherent strain analysis. Transactions of the 13th International Conference on Structural Mechanics in Reactor Technology, vol. 2, Div. F. Porto Alegre (1995) 243-248
44. Mochizuki M., Hayashi M., Nakagawa M., Tada N., and Shimizu S. A simplified analysis of residual stress at welded joints between plate and penetrating pipe. JSME Int. J. 40A (1997) 8-14
45. Mochizuki M., Hayashi M., and Hattori T. Numerical analysis of welding residual stress and its verification using neutron diffraction measurement. Trans. ASME, J. Eng. Mater. Technol. 122 (2000) 98-103
46. Mochizuki M., Hattori T., and Nakakado K. Residual stress reduction and fatigue strength improvement by controlling welding pass sequences. Trans. ASME, J. Eng. Mater. Technol. 122 (2000) 108-112
47. Mochizuki M., Hayashi M., and Hattori T. Residual stress distribution depending on welding sequence in multi-pass welded joints with X-shaped groove. Trans. ASME, J. Pressure Vessel Technol. 122 (2000) 27-32
48. Mochizuki M., and Toyoda M. Numerical analysis of residual stress in welded structures using inherent strain. In: Cerjak H. (Ed). Mathematical Modelling of Weld Phenomena vol. 5 (2001), The Institute of Metals, London 549-580
49. Mochizuki, M., Toyoda, M. In-process control of welding distortion by reverse-side heating in fillet welds. Trans. ASME, J. Eng. Mater. Technol., in press.
50. Mukai Y., Nishimura A., and Kim E.J. Redistribution of residual stress caused by crack propagation initially through residual tensile stress field. Q. J. Jpn. Weld. Soc. 4 (1986) 154-159 (in Japanese)
51. Nagaraja Rao N.R., Estuar F.R., and Tall L. Residual stresses in welded shapes. Weld. J. 43 (1964) 295s-306s
52. Nayama M., and Akitomo N. Residual stress relief of welded joints in pipework using ice plugs. Weld. Int. 8 (1994) 704-709
53. Nelson D.V. Effects of residual stress on fatigue crack propagation, residual stress effects in fatigue. ASTM STP 776 (1982) 172-194
54. Ohno H., and Koibuchi K. Local strain approach to fatigue life prediction of welded structures. Trans. Jpn. Soc. Mech. Eng. 53A (1987) 1-5 (in Japanese)
55. Ohta S., Ishimura T., and Tamura T. Improvement of fatigue strength of fillet-welded joint by water jet treatment of weld toe region. Q. J. Jpn. Weld. Soc. 14 (1996) 601-608 (in Japanese)
56. Ohta A., Watanabe O., Matsuoka K., Shiga C., Nishijima S., Maeda Y., Suzuki N., and Kubo T. Fatigue strength improvement of box welded joints by using low transformation temperature welding material. Q. J. Jpn. Weld. Soc. 18 (2000) 141-145 (in Japanese)
57. Parker A.P. Stress intensity factors, crack profiles, and fatigue crack growth rates in residual stress fields, residual stress effects in fatigue. ASTM STP 776 (1982) 13-31
58. Peterson R.E. Notch Sensitivity, Metal Fatigue (1959), McGraw-Hill Inc., New York pp. 293-306
59. Plesset M.S., and Chapman R.B. Collapse of an initially spherical vapor cavity in the neighborhood of a solid boundary. J. Fluid Mech. 47 2 (1971) 283-300
60. Porowski J.S., O'Donnell W.J., Badlani M.L., and Hampton E.J. Use of the mechanical stress improvement process to mitigate stress corrosion cracking in BWR piping systems. Nucl. Eng. Des. 124 (1990) 91-100
61. Rybicki E.F., and Stonesifer R.B. Computation of residual stress due to multipass welds in piping systems. Trans. ASME, J. Pressure Vessel Technol. 101 (1979) 149-154
62. Sagawa W., Anzai H., Hirano K., Ishida T., and Gotoh H. Application of water jet peening technology to BWR core shroud for IGSCC mitigation. Proceedings of the 8th International Conference on Nuclear Engineering. Baltimore, ICONE-8311 (2000)
63. Satoh K., and Terasaki T. Effect of welding conditions on residual stress distributions and welding deformation in welded structures materials. J. Jpn. Weld. Soc. 45 (1976) 42-50 (in Japanese)
64. Schmidt W.R., and Weems S.J. BWR core shroud replacement-a cost-effective alternative. Proceedings of the 7th International Conference on Nuclear Engineering. Tokyo, ICONE-7263 (1999)
65. Schmidt W.R., McCurdy H.W., and Wolfe K. Repair of CRD housing and in-core instrument penetrations in BWR reactor pressure vessels. Proceedings of the 7th International Conference on Nuclear Engineering. Tokyo, ICONE-7390 (1999)
66. Shiratori M., Miyoshi T., and Tanigawa K. Analysis of stress intensity factors for surface cracks subjected to arbitrarily distributed surface stresses. Trans. Jpn. Soc. Mech. Eng. 51A (1985) 1828-1835 (in Japanese)
67. Smith D.J., and Garwood S.J. Influence of postweld heat treatment on the variation of residual stresses in 50 mm thick welded ferritic steel plates. Int. J. Pressure Vessels Piping 51 (1982) 241-256
68. Society of Materials Science, Japan (Ed.), 1983. Databook on Fatigue Crack Growth Rates of Metallic Materials, vol. 1. Society of Materials Science, Japan, pp. 22-23.
69. Soyama H., Kusaka T., and Saka M. Compressive residual stress introduced by cavitation impacts. Proceedings of the 6th International Conference on Residual Stress. Oxford (2000) 674-681
70. Todoroki A., and Kobayashi H. Prediction of fatigue crack growth rate in residual stress field (application of superposition technique). Trans. Jpn. Soc. Mech. Eng. 54A (1988) 30-37 (in Japanese)
71. Ueda Y., and Yamakawa T. Analysis of thermal elastic-plastic stress and strain during welding by finite element method. Trans. Jpn. Weld. Soc. 2 (1971) 90-100
72. Ueda Y., Nakacho K., and Shimizu T. Improvement of residual stress of circumferential joint of pipe by heat-sink welding. Trans. ASME, J. Pressure Vessel Technol. 108 (1986) 14-23
73. Ueda Y., and Fukuda K. New measuring method of three-dimensional residual stresses in long welded joints using inherent strains as parameters-Lz Method. Trans. ASME, J. Eng. Mater. Technol. 111 (1989) 1-8
74. Watanabe M., and Satoh K. Effect of vibration on welding residual stress. J. Jpn. Weld. Soc. 24 (1955) 331-336 (in Japanese)
75. Watanabe M., and Satoh K. Effect of welding conditions on the shrinkage distortion in welded structures-shrinkage distortion is analyzed from the standpoint of welding heat and external restraint effects. Weld. J. 40 (1961) 377s-384s
76. Watanabe M., Mukai Y., Yokoyama H., and Oka Y. Stress-corrosion cracking in austenitic stainless steels. J. Jpn. Weld. Soc. 33 (1964) 908-917 (in Japanese)
77. Watanabe, M., Murakami, Z., Nishida, M., 1983. Residual stress reduction in welded joint by local low-temperature cooling. Preprints of National Meeting of Japan Welding Society, vol. 33, pp. 308-309 (in Japanese).
78. Yamashita T., Hattori T., Iida K., Nomoto T., and Sato M. Effects of residual stress on fatigue strength of small diameter welded pipe joint. Trans. ASME, J. Pressure Vessel Technol. 119 (1997) 428-434