Long-term survival of a cemented titanium-aluminum-vanadium alloy straight-stem femoral component

Journal of Bone and Joint Surgery - Series B

Volumn 88, Issue 12, 2006, Pages 1567-1573

  Kovac, Simon ^a   Trebse, R ^a   Milosev, I ^b   Pavlovcic, V ^c   Pisot, V ^a  

^a Valdoltra Orthopaedic Hospital   (Slovenia)

^b JO EF STEFAN INSTITUTE   (Slovenia)

^c UNIVERSITY MEDICAL CENTRE LJUBLJANA   (Slovenia)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM; CEFUROXIME; CHROMIUM; COBALT; HEPARIN; TITANIUM; VANADIUM;

ADULT; AGED; ARTICLE; AVASCULAR NECROSIS; CERAMICS; CONFIDENCE INTERVAL; CONTROLLED STUDY; DEATH; FEMALE; FEMUR HEAD; FOLLOW UP; FUNCTIONAL ASSESSMENT; HIP DYSPLASIA; HIP OSTEOARTHRITIS; HUMAN; LONG TERM CARE; MAJOR CLINICAL STUDY; MALE; POSTOPERATIVE INFECTION; PRIORITY JOURNAL; PROSTHESIS FAILURE; PROSTHESIS INFECTION; PROSTHESIS LOOSENING; PROSTHESIS MATERIAL; REOPERATION; RETROSPECTIVE STUDY; RHEUMATOID ARTHRITIS; SURVIVAL; THROMBOSIS; TOTAL HIP PROSTHESIS;

AGED; AGED, 80 AND OVER; ALUMINUM; CEMENTATION; EPIDEMIOLOGIC METHODS; FEMALE; HIP PROSTHESIS; HUMANS; MALE; MIDDLE AGED; PROSTHESIS DESIGN; PROSTHESIS FAILURE; REOPERATION; TITANIUM; TREATMENT OUTCOME;

EID: 33845757715     PISSN: 0301620X     EISSN: None     Source Type: Journal    
DOI: 10.1302/0301-620X.88B12.17796     Document Type: Article

References (51)

1. Kohn DH, Ducheyne P. Materials for bone and joint replacement. In: Williams DF, ed. Materials science and technology Vol 14. VCH:Weinheim. etc 1992:29-109.
2. Emerson RH, Head WC, Emerson CB, Rosenfeldt W, Higgins LL. A comparison of cemented and cementless titanium femoral components used for primary total hip arthroplasty. J Arthroplasty 2002;17:584-91.
3. Laupacis A, Bourne R, Rorabeck C, et al. Comparison of total hip arthroplasty performed with and without cement: a randomized trial. J Bone Joint Surg [Am] 2002;84-A:1823-8.
4. Head WC, Bauk DJ, Emerson RH Jr. Titanium as the material of choice for cementless femoral components in total hip arthroplasty. Clin Orthop 1995;311:85-90.
5. Salvati EA, Betts F, Doty SB. Particulate metallic debris in cemented total hip arthroplasty. Clin Orthop 1993;293:160-73.
6. McKellop H, Clarke I. Wear of artificial joint materials in laboratory tests. Acta Orthop Scand 1988;59:342-57.
7. Sarmiento A, Gruen TA. Radiographic analysis of a low-modulus titanium-alloy femoral total hip components: two to six year follow-up. J Bone Joint Surg [Am] 1985;67-A:48-56.
8. Bowditch M, Villar R. Is titanium so bad?: medium-term outcome of cemented titanium stems. J Bone Joint Surg [Br] 2001;83-B:680-5.
9. Eingartner C, Volkmann R, Winter E, et al. Results of cemented titanium alloy straight femoral shaft prosthesis after 10 years of follow-up. Int Orthop 2001;25:81-4.
10. Rader CP, Hendrich C, Löw S, Walther M, Eulert J. 5- to 8-year results of total hip endoprosthesis implantation with the Muller straight shaft prosthesis (cemented TiAIVb shaft). Unfallchirurg 2000;103:846-52 (in German).
11. Hamadouche M, Boutin P, Daussange J, Bolander ME, Sedel L. Alumina-on-alumina total hip arthroplasty: a minimum 18.5-year follow-up study. J Bone Joint Surg [Am] 2002;84-A:69-77.
12. Maurer TB, Ochsner PE, Schwarzer G, Sumacher M. Increased loosening of cemented straight stem prostheses made from titanium alloys: an analysis and comparison with prostheses made of cobalt-chromium alloy. Int Orthop 2001;25:77-80.
13. Tompkins GS, Lachiewitz PF, DeMasi R. A prospective study of titanium femoral component for noncemented total hip arthroplasty. J Arthroplasty 1994;9:623-30.
14. Jacobsson SA, Ivarsson I, Djerf K, Wahlstrom O. Stem loosening more common with ITH than Lubuinus prosthesis: a 5-year clinical and radiographic follow-up of 142 patients. Acta Orthop Scand 1995;65:425-31.
15. Jergesen HE, Karlen JW. Clinical outcome in total hip arthroplasty using a cemented titanium femoral prosthesis. J Arthroplasty 2002;17:592-9.
16. Massoud SN, Hunter JB, Holdsworth BJ, Wallace WA, Juliusson R. Early femoral loosening in one design of cemented hip replacement. J Bone Joint Surg [Br] 1997;79-B:603-8.
17. McFarland B, Osborne G. Approach to the hip: a suggested improvement on Koher's method. J Bone Joint Surg [Br] 1954;36-B:364-7.
18. Hardinge K. The direct lateral approach to the hip. J Bone Joint Surg [Br] 1982;64-B:17-19.
19. Harris WH. Traumatic arthritis of the hip after dislocation and acetabular fractures: treatment by mold arthroplasty. J Bone Joint Surg [Am] 1969;51-A:737-55.
20. Havinga ME, Spruit M, Anderson PG, et al. Results with the M. E. Muller cemented, straight-stem total hip prosthesis. J Arthroplasty 2001;16:33-6.
21. Barrack RL, Mulroy TD, Harris WH. Improved cementing techniques and femoral component loosening in young patients with hip arthroplasty: a 12-year radiographic review. J Bone Joint Surg [Br] 1992;74-B:385-9.
22. Harris WH, McGann WA. Loosening of the femoral component after use of the medullary-plug cementing technique: follow-up note with minimum five-year follow-up. J Bone Joint Surg [Am] 1986;68-A:1064-8.
23. Goetz DD, Smith EJ, Harris WH. The prevalence of femoral osteolysis associated with components inserted with or without cement in total hip replacements: a retrospective matched pair series. J Bone Joint Surg [Am] 1994;76-A:1121-9.
24. Gruen TA, McNiece GM, Amstutz HC. "Modes of failure" of cemented stem-type femoral components: a radiographic analysis of loosening. Clin Orthop 1979;141:731-47.
25. Brooker A, Bowerman JW, Robinson RA, Riley HL. Ectopic ossification following total hip replacement: incidence and method of classification. J Bone Joint Surg [Am] 1973;55-A:1692-32.
26. Kaplan EL, Meier P. Non-parametric estimation from incomplete observations. J Am Statist Assoc 1958;53:457-81.
27. Peto R, Peto J. Asymptotically efficient rank invariant test procedures. J Roy Statist Soc Series A 1972;135:185-207.
28. Cox DR. Regression models and life-tables. J Roy Statist Soc Series B 1972;34:187-202.
29. Wilt JD, Swann M. Metal wear and tissue response in failed titanium alloy total hip replacements. J Bone Joint Surg [Br] 1991;73-B:559-63.
30. Allain J, Le Mouel S, Goutallier D, Voisin MC. Poor eight-year survival of cemented zirconia-polyethylene total hip replacements. J Bone Joint Surg [Br] 1999;81-B:835-42.
31. Sedel L, Kerboull L, Christel P, Meunier A, Witvoet J. Alumina-on-alumina hip replacement: results and survivorship in young patients. J Bone Joint Surg [Br] 1990;72-B:658-63.
32. Le Mouel S, Allain J, Goutallier D. Ten-year survival of 156 alumina polyethylene total hip arthroplasties. Rev Chir Orthop Reparatrice Appar Mot 1998;84:338-45 (in French).
33. Klapach AS, Callaghan JJ, Goetz DD, Olejniczak JP, Johnston RC. Charnley total hip arthroplasty with use of improved cementing techniques: a minimum twenty-year follow-up study. J Bone Joint Surg [Am] 2001;83-A:1840-8.
34. Walton NP, Darrah C, Shepstone L, Donell ST Phillips H. The Elite Plus total hip arthroplasty: the need for radiological surveillance. J Bone Joint Surg [Br] 2005;87-B:458-62.
35. Ramaniraka NA, Rakotomanana LR, Leyvraz PF. The fixation of the cemented femoral component: effects of stem stiffness, cement thickness and roughness of the cement-bone surface. J Bone Joint Surg [Br] 2000;82-B:297-303.
36. Willert HG, Broback LG, Buchhorn GH, et al. Crevice corrosion of cemented titanium alloy stems in total hip replacements. Clin Orthop 1996;333:51-75.
37. Breusch SJ, Lukoschek M, Kreutzer J, Drocai D, Gruen TA. Dependency of cement mantle thickness on femoral stem design and centralizer. J Arthroplasty 2001;16:648-57.
38. Schuller HM, Marti RK. Ten-year socket wear in 66 arthroplasties: ceramic versus metal heads. Acta Orthop Scand 1990;61:240-3.
39. Hasegawa M, Ohashi T, Tani T. Poor outcome of 44 cemented total hip arthroplasties with alumina ceramic heads: clinical evaluation and retrieval analysis after 10-16 years. Acta Orthop Scand 2001;72:449-56.
40. Collis DK, Mohler CG. Comparison of clinical outcomes in total hip arthroplasty using rough and polished cemented stems with essentially the same geometry. J Bone Joint Surg [Am] 2002;84-A:586-92.
41. Sporer SM, Callaghan JJ, Olejniczak JP, Goetz DD, Johnston RC. The effects of surface roughness and polymethylmethacrylate precoating on the radiographic and clinical results of the Iowa hip prosthesis: a study of patients less than fifty years old. J Bone Joint Surg [Am] 1999;81-A:481-92.
42. Agins HJ, Alcock NW, Bansal M, et al. Metallic wear in failed titanium-alloy total hip replacements: a histological and quantitative analysis. J Bone Joint Surg [Am] 1988;70-A:347-56.
43. Milosev I, Antolic V, Minovic A, et al. Extensive metallosis and necrosis in failed prostheses with cemented titanium-alloy stems and ceramic heads. J Bone Joint Surg [Br] 2000;82-B:352-7.
44. Janssen D, Aquarius R, Stolk J, Verdonschot N. Finite-element analysis of failure of the Capital Hip designs. J Bone Joint Surg [Br] 2005;87-B:1561-7.
45. McGrath LR, Shardlow DL, Ingham E, et al. A retrieval study of Capital hip prostheses with titanium alloy femoral stems. J Bone Joint Surg [Br] 2001;83-B:1195-201.
46. Kärrholm J, Frech W, Nivbrant B, et al. Fixation and metal release from the Tifit femoral stem prosthesis: 5 year follow-up of 64 cases. Acta Orthop Scand 1998;69:369-78.
47. Viceconti M, Ruggieri O, Toni A, Giunti A. Design-relate fretting wear in modular neck hip prosthesis. J Biomed Mater Res 1996;30:181-6.
48. Della Valle AG, Doty S, Gradle G, Labissiere A, Nester BJ. Wear of highly cross-linked polyethylene liner associated with metallic deposition on a ceramic femoral head. J Arthroplasty 2004;19:532-6.
49. Annual Book of ASTM standards. Volume 13.01 Medical Devices, 1988, F 603 Standard specification for high-purity dense aluminium oxide for surgical implant applications, ASTM: Philadelphia, 1988:136.
50. International standard. Reference number ISO 6474 Implants for surgery: ceramic materials based on high purity alumina. Second ed, 1994-02-01.
51. Furnes ON, Espehaug B, Lie SA, et al. Prospective studies of hip (THA) and knee prostheses (TKA) in the Norwegian Arthroplasty Register 1987-2003. Procs Annual Meeting of the AAOS, Washington DC, February 2005.