Residual stresses and distortions in welded structures: A perspective for engineering applications

Science and Technology of Welding and Joining

Volumn 10, Issue 4, 2005, Pages 389-398

  Dong, P ^a  

^a BATTELLE MEMORIAL INSTITUTE   (United States)

Author keywords

Buckling; Distortion; Friction welds; Heat flow; Repair Welding; Residual stress; Spot Weld; Thermal plasticity; Welded joints; Welded structures

Indexed keywords

EID: 33845578220     PISSN: 13621718     EISSN: 13621718     Source Type: Journal    
DOI: 10.1179/174329305X29465     Document Type: Article

References (50)

1. L. Karlsson, L.-E. Lindgren, M. Jonsson, L. Josefson and A. Oddy: in 'Mathematical modeling of weld phenomena' (ed. H. Cerjak), 571-589; 1997, London, The Institute of Metals.
2. P. Dong: in Proc. Sixth Int. Conf. 'Residual stresses' (ICRS-6), 1223-1335; Oxford, UK, 2000.
3. P. Dong and F. W. Brust: ASME Trans: J Pressure Vessel Technol., 2000, 122, (3), 329-338.
4. P. Dong: in 'Mathematical modeling of weld phenomena 5' (ed. H. Cerjak and H. K. D. H. Badeshia), 507-529; 2001, London, The Institute of Materials.
5. P. Michaleris and X. Sun: Weld. J., 1997, 76, (11), 451s-457s.
6. M. V. Deo and P. Michaleris: Sci. Technol. Weld. Joining, 2003, 8, (1), 49-54.
7. Y. P. Yang, P. Dong, F. W. Brust, J. Zhang and Z. Cao: Adv. Comput. Engng Sci., 2000, 2, August, 1906-1912.
8. P. Dong, J. K. Hong and P. Rogers: Weld. J., 1998, 77, (11), 439s-445s.
9. Y. Y. Yang, P. Dong, X. Tian and Z. Zhang: in Proc. 5th Int. Conf. 'Trends in welding research', Pine Mountain, GE, USA, June 1998, (ed. J. M. Vitek et al.), 700-705; 1999, Materials Park, OH, ASM International.
10. Y. Y. Yang, P. Dong, J. Zhang and X. Tian: Weld. J., 2000; 79, (1), 9s-17s.
11. M. Mochizuki, T. Hattori and K. Kakakado: ASME J. Engng Maler. Technol., 2000, 122, 108-112.
12. M. Mochizuki, K. Enomoto and M. Toyoda: in 'Mathematical modelling of weld phenomena', (ed. H. Cerjak and H. K. D. H. Bhadeshia), 549-580; 2002, London, Maney.
13. P. Dong, J. Zhang, Y. Yang and Z. Cao: in Proc. SAE IBEC Int. Conf., SAE Paper #99IBECA-7; 1999, Detroit, SAE International.
14. P. Dong, X. Sun, F. Lu and J. Zhang: Proc. SAE IBEC Int. Conf., SAE Paper #99IBECA-14; 1999, Detroit, SAE International.
15. H. Murakawa, J. Wang, J. Tanaka, Y. Horii and M. Sato: Proc. Conf. on 'Pressure vessels and piping', vol. 30, 297-306; 1999, ASME.
16. D. E. Rodgers and P. R. Fletcher: Weld. J. Res. Suppl., 1938, 17, 4-7.
17. K. Masubuchi: Weld. Res. Counc. Bull., 1970, 149, 1-30.
18. K. Masubuchi: 'Analysis of welded structures', International Series on Science and Technology, 1980, vol. 33, Pergamon Press.
19. T. W. Greene and A. A. Holzbaur: Weld. J Res. Suppl., 1946, 11, (3), 171s-185s.
20. T. E. Barber, F. W. Brust, H. W. Mishler and M. F. Kanninen: 'Controlling residual stresses by heat sink welding'; 1981, EPRI Report NP-2159-LD.
21. P. A. Mcguire and J. J. Groom: 'Computational analysis and experimental evaluation for residual stresses from induction heating', final report to EPRI (RP 1394-4); 1979, Columbus, OH, Battelle Memorial Institute.
22. F. W. Brust and E. F. Rybicki: Trans ASME J. Pressure Vessel Technol., 1981, 103, August, 294-299.
23. Q. Guan, C. X. Zhang and D. L. Guo: Weld. World, 1994, 33, (4), 308-312.
24. R. Kamichika, T. Yada and A. Okamoto: Trans Japan Weld. Soc., 1974, 5, (1), 21-22.
25. E. Friedman: ASME Trans J Pressure Vessel Technol., 1975, 97, August, 206-213.
26. F. W. Brust and M. F. Kanninen: ASME J. Mater. Energy Systems, 1981, 3, (3), 56-62.
27. F. W. Brust and R. B. Stonesifer: 'Effects of weld parameters on residual stresses in BWR piping systems', EPRI Final Report, NP-1743; 1981.
28. S. Fricke, E. Keim and J. Schmidt: in Proc. ICES'98 (ed. S. N. Atluri), 1998; Atlanta, GA.
29. J. Goldak, et al.: in Proc. ICES'98 (ed. S. N. Atluri), 1998; Atlanta, GA.
30. B. Buchmayr: in 'Mathematical modelling of weld phenomena' (ed. H. Cerjak and K. E. Easterling); 1993, London, The Institute of Materials.
31. C. K. Leung and R. J. Pick: Weld. Res. Counc. Bull., 1992, 356, 11-33.
32. Y. Shim, Z. Feng, S. Lee, D. S. Kim, J. Jaeger, J. C. Paparitan, C. L. Tsai: Weld. J., 1992, No. 71, 305s-312s.
33. J. K. Hong, P. Dong and C. L. Tsai: in Int. Conf. Proc. 'Modeling and control of joining processes', (ed. T. Zacharia), 470-476; 1994, American Welding Society.
34. Y. Dong, J. K. Hong, C. L. Tsai and P. Dong: Weld. J., 1997, 10, (10), 442s-449s.
35. P. Michaleris, Z. Feng and G. Campbell: in Proc. 1997 ASME Conf. 'Pressure vessels and piping', vol. 347, 91-102; 1997, Orlando, FL, ASME.
36. F. W. Brust, P. Dong and J. Zhang: in 'Advances in Computational Engineering Science' (ed. S. N. Atluri and G. Yagawa), 51-56; 1997.
37. J. Zhang, P. Dong and F. W. Brust: in Trans 14th Int. Conf. 'Structural mechanics in reactor technology (SMIRT 14)', 335-344; 1997, Lyon, France.
38. P. Dong: ASME J Pressure Vessel Technol., 2001, 123, (2), 207-213.
39. P. Dong, Z. Cao, J. K. Hong, F. W. Brust, W. Bell and E. J. Mcdonald: Weld. Res. Council Bull, 2000, 455, 22-28.
40. P. Dong, J. Zhang and J. P. Bouchard: ASME Trans J. Pressure Vessel Technol., 2002, 124, (1), 74-80.
41. M. Mochizuki: ASME Trans J. Engng Mater. Technol., 2000, 122, (1), 98-103.
42. M. Toyoda, M. Mochizuki and S. Matsushima: 'Analytical study of residual stress and microstructures by repair welds'; 2002, IIW Doc. X-1501-2002.
43. P. Dong and J. K. Hong: Weld. Res. Counc. Bull. 2002, 476, November.
44. J-J. Janosch and R. J. Gordon: 'Residual stress and distortion predictions in welded structures', HW Doc. IIW-X-1455-00/XV-1043-00/X/XV-RSDP- 52-00, 2000; HW 53rd Annual Assembly, Florence, July.
45. K. Koppenhoefer and R. Gordon: 'IIW X-XV RSDP residual stress round-robin results - phase 1', IIW Doc. IIW-X-XV-RSDP50-2000, 2000.
46. P. Dong and J. K. Hong: Weld. World, 2002, 46, (5/6), 24-31.
47. J. J. Janosch: 'Round robin phase II - preliminary 3D modeling results', IIW Doc. IIW-X/XIII/XV-RSDP-77-03, 2003.
48. P. Dong and J. J. Janosch: 'Residual stress compendium compilation: Draft Protocol and Call for Participation', IIW Doc. IIW-X/XIII/XV-RSDP-63-02.
49. M. V. Li, P. Dong and M. Kimchi: in Proc. Int. Body Engineering Conf. (IBEC) 'Body manufacturing, assembly, and advanced manufacturing', vol. 5, 59-64; 1998, SAE International.
50. X. Sun and P. Dong: Weld. J Res. Suppl., 2000, 79, (8), 215s-221s.