7-lump kinetic model for residual oil catalytic cracking

Journal of Zhejiang University: Science

Volumn 7, Issue 11, 2006, Pages 1932-1941

  Xu, Ou Guan ^a   Su, Hong Ye ^a   Mu, Sheng Jing ^b   Chu, Jian ^a  

^a STATE KEY LABORATORY OF INDUSTRIAL CONTROL TECHNOLOGY   (China)

^b INSTITUTE OF HIGH PERFORMANCE COMPUTING   (Singapore)

Author keywords

7 lump kinetic model; Residua catalytic cracking (RCC); Unit factor

Indexed keywords

ALGORITHMS; COKE; KINETIC THEORY; OPTIMIZATION;

7-LUMP KINETIC MODEL; RESIDUA CATALYTIC CRACKING; UNIT FACTOR;

CATALYTIC CRACKING;

EID: 33845362617     PISSN: 10093095     EISSN: None     Source Type: Journal    
DOI: 10.1631/jzus.2006.A1932     Document Type: Article

References (38)

1. Abul-Hamayel, M.A., 2003. Kinetic modeling of high-severity fluidized catalytic cracking. Fuel, 82(9): 1113-1118. [doi:10.1016/S0016-2361(03)00017-6]
2. Ancheyta-Juárez, J., López-Isunza, F., Aguilar-Rodriguez, E., Moreno-Mayorga, J.C., 1997. A strategy for kinetic parameter estimation in the fluid catalytic cracking process. Ind. Eng. Chem. Res., 36(12): 5170-5174. [doi:10.1021/ie970271r]
3. Ancheyta-Juárez, J., López-Isunza, F., Aguilar-Rodriguez, E., 1999. 5-lump kinetic model for gas oil catalytic cracking. Applied Catalysis A: General, 177(2): 227-235. [doi:10.1016/S0926-860X(98)00262-2]
4. Blanding, F.H., 1953. Reaction rates in catalytic cracking of petroleum. Industrial and Engineering Chemistry, 45(6): 1186-1197. [doi:10.1021/ie50522a022]
5. Corella, J., Frances, E., 1991. Fluid catalytic cracking. ACS Symp. Ser., 452: 165-182.
6. Corma, A., Melo, F.V., Sauvanaud, L., 2005. Kinetic and decay cracking model for a Microdowner unit. Applied Catalysis A: General, 287(1): 34-46. [doi:10.1016/j.apcata.2005.03.032]
7. Den, X.L., Sha, Y.X., Wang, L.Y., 1994. Studies on kinetic model of resid catalytic cracking. Petroleum Processing and Petrochemicals, 26(8): 35-39 (in Chinese).
8. Dupain, X., Gamas, E.D., Madon, R., Kelkar, C.P., Makkee, M., Moulijn, J.A., 2003. Aromatic gas oil cracking under realistic FCC conditions in a microriser reactor. Fuel, 82: 1559-1569.
9. Froment, G.F., 2001. Modeling of catalyst deactivation. Applied Catalysis A: General, 212(1-2): 117-128. [doi:10.1016/S0926-860X(00)00850-4]
10. Jacob, S.M., Gross, B., 1976. A lumping and reaction scheme for catalytic cracking. AIChE J., 22(4): 701-713. [doi:10.1002/aic.690220412]
11. John, T.M., Wojciechowsky, B.W., 1975. On identifying the primary and secondary products of the catalytic cracking of neural distillates. J. of Catal., 37(2): 240-250. [doi:10.1016/0021-9517(75)90158-X]
12. Kuo, J.C.W., Wei, J., 1969. A lumping analysis in monomolecular reaction systems: analysis of approximately lumpable system. Ind. Eng. Chem. Fundam., 8(1): 124-133. [doi:10.1021/i160029a020]
13. Lee, L.S., Chen, Y.W., Huang, T.N., 1989. Four-lump kinetic model for fluid catalytic cracking process. Can. J. Chem. Eng., 67: 615-623.
14. Mao, X.J., Weng, H.X., Zhu, Z.M., Zhu, K.H., 1985. Investigation of the lumped kinetic model for catalytic cracking III feedstocks and product analysis of light fuel oil (LFO) cracking and rate constant determination. ACTA SINICA (Petroleum Processing Section), 1(4): 11-17.
15. Meng, X.H., Xu, C.M., Gao, J.S., Li, L., 2006. Catalytic pyrolysis of heavy oils: 8-lump kinetic model. Applied Catalysis A: General, 301(1): 32-38. [doi:10.1016/j.apcata.2005.11.010]
16. Mu, S.J., Su, H.Y., Li, W., Chu, J., 2005. Reactor model for industrial residual fluid catalytic cracking based on six-lump kinetic model. J. Chem. Eng. of Chinese Univ., 19(5): 630-635 (in Chinese).
17. Nayak, S.V., Joshi, S.L., Ranade, V.V., 2005. Modeling of vaporization and cracking of liquid oil injected in a gas-solid riser. Chemical Engineering Science, 60(22): 6049-6066. [doi:10.1016/j.ces.2005.04.046]
18. Ng, S., Wang, J.S., Zhu, Y.X., Zheng, L.G., Ding, F.C., Yang, L.Y., Yui, S., 2002. A new approach to determining product selectivity in gas oil cracking using a four-lump kinetic model. Energy and Fuels, 16(3): 593-600. [doi:10.1021/ef0101762]
19. Oliveira, L.L., Biscaia, E.C., 1989. Catalytic cracking kinetic models. Parameter estimation and model evaluation. Ind. Eng. Chem. Res., 28(3): 264-271. [doi:10.1021/ie00087a003]
20. Peixoto, F.C., Medeiros, J.L., 2001. Reaction in multi-indexed continuous mixtures: catalytic cracking of petroleum fractions. AIChE J., 47(4): 935-947. [doi:10.1002/aic.690470416]
21. Pitault, I., Forissier, M., Bernard, J.R., 1995. Determination of kinetics constants of catalytic cracking by modeling microactivity test. Can. J. Chem. Eng., 73: 498-504.
22. Quintana-Solórzano, R., Thybaut, J.W., Marin, G.B., Lødeng, R., Holmen, A., 2005. Single-event microkinetics for coke formation in catalytic cracking. Catalysis Today, 107-108: 619-629. [doi:10.1016/j.cattod.2005.07.036]
23. Ren, J., 1992. Investigation of the Lump Kinetic Model for Heavy Oil Catalytic Cracking Reaction. Ph.D Thesis, East China University of Science and Technology, China (in Chinese).
24. Ren, J., Weng, H.X., Liu, F.Y., 1993. Study on composition and structure of heavy oil. Petroleum Processing, 24(9): 56-61 (in Chinese).
25. Sugungun, M.M., Kolesnikov, I.M., 1998. Kinetic modeling of FCC process. Catalysis Today, 43(3-4): 315-325. [doi:10.1016/S0920-5861(98)00160-6]
26. Takatsuka, T., Sato, S., 1987. A reaction model for fluidized- bed catalytic cracking of residual oil. Inter. Chem. Eng., 27(1): 107-116.
27. Theologos, K.M., Lygeros, A.I., Markatos, N.C., 1999. Feedstock atomization effects on FCC riser reactors selectivity. Chemical Engineering Science, 54(22): 5617-5625. [doi:10.1016/S0009-2509(99)00294-8]
28. van Landeghem, F.V., Nevicato, D., Pitault, I., Forissier, M., Turlier, P., Derouin, C., Bernard, J.R., 1996. Fluid catalytic cracking: modelling of an industrial riser. Applied Catalysis A: General, 138(2): 381-405. [doi:10.1016/0926-860X(95)00309-6]
29. Voorhies, A., 1945. Carbon formation in catalytic cracking. Industrial and Engineering Chemistry, 37(4): 318-322. [doi:10.1021/ie50424a010]
30. Wang, L.Y., Yang, B.L., Wang, Z.W., 2005. Lumps and kinetics for the secondary reactions in catalytically cracked gasoline. Chemical Engineering Journal, 109(1-3): 1-9. [doi:10.1016/j.cej.2005.02.024]
31. Wang, X.S., Weng, H.X., Mao, X.J., Liu, F.Y., Sha, Y.X., Den, X.L., 1988. Investigation of the lumped kinetic model for catalytic cracking IV determination of kinetic parameters in heavy gas oil network. ACTA SINICA (Petroleum Processing Section), 4(3): 11-17.
32. Weekman, V.W., 1968. A model of catalytic cracking conversion in fixed, moving, and fluid-bed reactors. Ind. Eng. Chem. Proc. Des. Dev., 7(1): 90-95. [doi:10.1021/i260025a018]
33. Weekman, V.W., 1969. Kinetics and dynamics of catalytic cracking selectivity in fixed-bed reactor. Ind. Eng. Chem. Proc. Des. Dev., 8(3): 385-391. [doi:10.1021/i260031a015]
34. Weekman, V.W., Nace, D.M., 1970. Kinetics of catalytic cracking selectivity in fixed, moving, and fluid bed reactors. AIChE J., 16(3): 397-404. [doi:10.1002/aic.690160316]
35. Wei, J., Kuo, J.C.W., 1969. A lumping analysis in monomolecular reaction systems: analysis of the exactly lumpable system. Ind. Eng. Chem. Fundam., 8(1): 114-123. [doi:10.1021/i160029a019]
36. Weng, H.X, Ouyang, F.S., Ma, J., 1995a. Lumped model for heavy oil catalytic cracking reaction (I), Establishment of the model. Journal of Chemical Industry and Engineering (China), 46(6): 662-668 (in Chinese).
37. Weng, H.X, Ouyang, F.S., Ma, J., 1995b. Lumped model for heavy oil catalytic cracking reaction (II), commercial verification of the model. Journal of Chemical Industry and Engineering (China), 46(6): 669-674 (in Chinese).
38. Yi, W., 2002. Study on Lumping Kinetic Model for Increasing Diesel in Fluid Catalytic Cracking. Ph.D Thesis, East China University of Science and Technology, China (in Chinese).