Inelastic analysis of a reinforced concrete shear wall building according to the National Building Code of Canada 2005

Canadian Journal of Civil Engineering

Volumn 33, Issue 7, 2006, Pages 854-871

  Panneton, M ^a   Léger, Pierre ^a   Tremblay, R ^a  

^a ÉCOLE POLYTECHNIQUE DE MONTRÉAL   (Canada)

Author keywords

Building; CSA A23.3 design of concrete structures; Inelastic seismic response; NBCC; Shear wall

Indexed keywords

BUILDING CODES; CONCRETE BUILDINGS; EARTHQUAKE RESISTANCE; MODAL ANALYSIS; REINFORCED CONCRETE; STIFFNESS; STRUCTURAL ANALYSIS;

INELASTIC ANALYSIS; INELASTIC SEISMIC RESPONSE; STATIC ANALYSIS;

SHEAR WALLS;

BUILDING CODES; CONCRETE BUILDINGS; EARTHQUAKE RESISTANCE; MODAL ANALYSIS; REINFORCED CONCRETE; SHEAR WALLS; STIFFNESS; STRUCTURAL ANALYSIS;

BUILDING CODE; CONCRETE STRUCTURE; MULTISTOREY BUILDING; REINFORCED CONCRETE; SEISMIC DESIGN; SEISMIC RESPONSE;

CANADA; NORTH AMERICA;

EID: 33751352591     PISSN: 03151468     EISSN: None     Source Type: Journal    
DOI: 10.1139/L06-026     Document Type: Article

References (35)

1. ACI Committee 318. 1999. Building code requirements for structural concrete (ACI318-99) and commentary (ACI318R-99). American Concrete Institute (ACI), Farmington Hills, Mich.
2. Adams, J., and Halchuk, S. 2003. Fourth generation seismic hazard maps of Canada: values for over 650 Canadian localities intended for the 2005 Building Code of Canada. Geological Survey of Canada, Open File 4459.
3. Adams, J., and Atkinson, G. 2003. Development of seismic hazard maps for the proposed 2005 edition of the National Building Code of Canada. Canadian Journal of Civil Engineering, 30(2): 255-271.
4. Adebar, P., and Ibrahim, A.M.M. 2002. Simple nonlinear flexural stiffness model for concrete structural walls. Earthquake Spectra, 18(3): 407-426.
5. Balkaya, C., and Kalkan, E. 2003. Estimation of fundamental periods of shear-wall dominant building structures. Earthquake Engineering and Structural Dynamics, 32: 985-998.
6. Carr, A.J. 2003. Ruaumoko3D [computer program]. 3-dimensional version (December 2003). Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
7. Chopra, A.K., and Goël, R.K. 1998. Period formulas for concrete shear wall buildings. ASCE Journal of Structural Engineering, 124(4): 426-433.
8. Computers and Structures, Inc. 2003a. SAP2000 [computer program]. Version 8.2.3. Computers and Structures, Inc., Berkeley, Calif.
9. Computers and Structures, Inc. 2003b. ETABS nonlinear [computer program]. Version 8.3.0. Computers and Structures, Inc., Berkeley, Calif.
10. Computers and Structures, Inc. 2003c. Section builder [computer program]. Version 8.1.1. Computers and Structures, Inc., Berkeley, Calif.
11. CPCA. 1995. Concrete design handbook. Canadian Portland Cement Association (CPCA), Ottawa, Ont.
12. CSA. 1994. Design of concrete structures. Standard CAN/CSA-A23.3-94, Canadian Standards Association (CSA), Rexdale, Ont.
13. CSA. 2002. Design of concrete structures, draft 4 (December 2002). Standard CAN/CSA A23.3-04, Canadian Standards Association (CSA), Rexdale, Ont.
14. Englekirk, R.E. 2003. Seismic design of reinforced and precast concrete buildings. John Wiley & Sons, Inc., New York.
15. FEMA. 1997. NEHRP guidelines for the seismic rehabilitation of buildings and commentary. Federal Emergency Management Agency (FEMA), Washington, D.C. FEMA Publication 273 and 274.
16. Filiatrault, A., D'Aronco, D., and Tinawi, R. 1994. Seismic shear demand of ductile cantilever walls: a Canadian code perspective. Canadian Journal of Civil Engineering, 21: 363-376.
17. Fuentes, A. 1998. Bâtiment en zone sismique, conception des bâtiments en maçonnerie et en béton armé selon les recommandations de l'AFPS et l'Eurocode 8, avec suggestions et compléments indispensables à l'élaboration d'un projet fiable et économique. Presses de l'École Nationale des Ponts et Chaussée, Paris.
18. Ghrib, F., and Mamedov, H. 2004. Period formulas of shear wall buildings with flexible bases. Earthquake Engineering and Structural Dynamics, 33: 295-314.
19. Gosh, S.K., and Markevicius, V.P. 1990. Design of earthquake resistant shear walls to prevent shear failure. In Proceedings of the 4th US National Conference on Earthquake Engineering, Palm Springs, Calif., 20-24 May 1990. Vol. 2. Earthquake Engineering Research Institute (EERI), Oakland, Calif. pp. 905-913.
20. Heidebrecht, A.C. 2003. Overview of seismic provisions of the proposed 2005 edition of the National Building Code of Canada. Canadian Journal of Civil Engineering, 30(2): 241-254.
21. Humar, J., and Mahgoub, M.A. 2003. Determination of seismic design forces by equivalent static load method. Canadian Journal of Civil Engineering, 30(2): 287-307.
22. NRCC. 1995. National Building Code of Canada. 11th ed. Canadian Commission on Building and Fire Codes, National Research Council of Canada (NRCC), Ottawa, Ont.
23. NRCC. 2005. National Building Code of Canada. 12th ed. Canadian Commission on Building and Fire Codes, National Research Council of Canada (NRCC), Ottawa, Ont.
24. NZS. 1995. Concrete structures standard. Standard NZS 3101: 1995, New Zealand Standards (NZS), Wellington, New Zealand.
25. Panneton, M. 2004. 3D seismic analysis of a reinforced concrete building braced by shear walls according to the National Building Code of Canada (NBCC) 2005. M.A.Sc. thesis, Department of Civil, Geological and Mining Engineering, École Polytechnique de Montréal, Que. [In French.]
26. Paulay, T., and Priestley, M.J.N. 1992. Seismic design of reinforced concrete and masonry buildings. John Wiley & Sons, Inc., New York.
27. Priestley, M.J.N., and Amaris, A.D. 2002. Dynamic amplification of seismic moments and shear forces in cantilever walls. Rose School, University of Pavia, Pavia, Italy. Research Report ROSE- 2002/01.
28. Priestley, M.J.N., and Hart, G.C. 1989. Design recommendations for the period of vibration of masonry wall buildings. University of California, San Diego and Los Angeles, Calif. Research Report SSRP 89/05.
29. Saatcioglu, M., and Humar, J. 2003. Dynamic analysis of buildings for earthquake-resistant design. Canadian Journal of Civil Engineering, 30(2): 338-359.
30. Sieffert, J., and Cevaer, F. 1991. Manuel des fonctions d'impédance, fondations superficielles. Ouest Éditions, Presses Académiques, Nantes, France.
31. Stafford-Smith, B., and Coull, A. 1991. Tall building structures: analysis and design. John Wiley & Sons, Inc., New York.
32. Tremblay, R., and Atkinson, G. 2001. Comparative study of inelastic seismic demand of Eastern and Western Canadian sites. Earthquake Spectra, 17(2): 333-358.
33. Tremblay, R., Léger, P., and Tu, J. 2001. Inelastic seismic response of concrete shear walls considering P-delta effects. Canadian Journal of Civil Engineering, 28(4): 640-655.
34. Wallace, J.W. 1995. Seismic design of RC structural walls: Part I: new code format. ASCE Journal of Structural Engineering, 121(1): 75-87.
35. Wallace, J.W., and Moehle, J.P. 1992. Ductility and detailing requirements of bearing wall buildings. ASCE Journal of Structural Engineering, 118(6): 1625-1644.