Semantic tolerance modeling

Proceedings of the ASME Design Engineering Technical Conference

Volumn 2006, Issue , 2006, Pages

  Wang, Yan ^a  

^a UNIVERSITY OF CENTRAL FLORIDA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL GEOMETRY; COMPUTER SIMULATION; EMBEDDED SYSTEMS; MATHEMATICAL INSTRUMENTS; SEMANTICS; THREE DIMENSIONAL COMPUTER GRAPHICS;

ENGINEERING SEMANTICS; MODAL INTERVAL; SEMANTIC TOLERANCE MODELING; TOLERANCE STACKING;

FAULT TOLERANT COMPUTER SYSTEMS;

EID: 33751325355     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/detc2006-99609     Document Type: Conference Paper

References (72)

1. Wang, Y. (2006) Semantic tolerance modeling based on modal interval analysis, in Proceedings of NSF Workshop on Reliable Engineering Computing (REC'06), Feb. 22-24, 2006, Georgia Institute of Technology, Savannah, GA, ed. by R.L. Muhanna and R.L. Mullen, pp.293-318
2. Hong, Y.S. and Chang, T.-C. (2002) A comprehensive review of tolerancing research. International Journal of Production Research, 40(11), 2425-2459
3. ADCATS Bibliography for Tolerance Work, http://adcats.et.byu.edu/WWW/ bibliographies/DocList.html
4. Requicha, A.A.G. (1983) Toward a theory of geometric tolerancing. International Journal of Robotics Research, 2(2), 45-60
5. nd Symposium on Solid Modeling and Applications, pp.377-386
6. Roy, U. and Li, B. (1998) Representation and interpretation of geometric tolerances for polyhedral objects - I Form tolerances. Computer-Aided Design, 30(2), 151-161
7. Roy, U. and Li, B. (1999) Representation and interpretation of geometric tolerances for polyhedral objects - II Size, orientation and position tolerances. Computer-Aided Design, 31(4), 273-285
8. Teck, T.B., Senthil Kumar, A., and Subramaian, V. (2001) A CAD integrated analysis of flatness in a form tolerance zone. Computer-Aided Design, 33(11) 853-865
9. Davidson, J.K., Mujezinovic, A., and Shah, J.J. (2002) A new mathematical model for geometric tolerances as applied to round faces. ASME Journal of Mechanical Design, 124(4) 609-622
10. Mujezinovic, A., Davidson, J.K., and Shah, J.J. (2004) A new mathematical model for geometric tolerances as applied to polygonal faces. ASME Journal of Mechanical Design, 126(3) 504-518
11. Bhide, S., Davidson, J.K., and Shah, J.J. (2003) A new mathematical model for geometric tolerances as applied to axes, in ASME Proceedings of Design Engineering Technical Conferences / Design Automation Conference, Sept 2-6, 2003, Chicago, Illinois, Paper No. DETC2003/DAC-48736
12. Nigam, S.D. and Turner, J.U. (1995) Review of statistical approaches to tolerance analysis. Computer-Aided Design, 27(1)6-15
13. Gerth, R.J. (1997) Tolerance analysis: A tutorial of current practice, in Advanced Tolerancing Techniques, ed. by Zhang, H.C., New York: John Wiley & Sons, pp.65-99
14. Chase, K.W. and Greenwood, W.H. (1988) Design issues in mechanical tolerance analysis. Manufacturing Review, 1(1), 50-59
15. Srinivasan, V. and O'Connor, MA. (1994) On interpreting statistical tolerancing. Manufacturing Review, 7(4), 304-311
16. Srinivasan, V., O'Connor, M.A., and Scholz, F.W. (1997) Techniques for composing a class of statistical tolerance zones, in Advanced Tolerancing Techniques, ed. by Zhang, H.C., New York: John Wiley & Sons, pp. 139-165
17. Zhang, C., Luo, J., and Wang, B. (1999) Statistical tolerance synthesis using distribution function zones. International Journal of Production Research, 37(17), 3995-4006
18. Wirtz, A., Gachter, C., and Wipf, D. (1993) From unambiguously defined geometry to the perfect quality control loop. Annals of the CIRP, 42(1) 615-618
19. th CIRP Seminar on Computer Aided Tolerancing, April 5-6, 1995, University of Tokyo, Tokyo, Japan, pp.195-210
20. th CIRP Seminar on Computer Aided Tolerancing, April 5-6, 1995, University of Tokyo, Tokyo, Japan, pp. 143-154
21. rd Seminars on Computer Aided Tolerancing, April 27-28, 1993, Cachan, France, pp. 179-196
22. Whitney, D.E., Gilbert, O.L., and Jastrzebski, M. (1994) Representation of geometric variations using matrix transforms for statistical tolerance analysis in assemblies. Research in Engineering Design, 6, 191-210
23. Desrochers, A. and Riviere, A. (1997) A matrix approach to the representation of tolerance zones and clearances. International Journal of Advanced Manufacturing Technology, 13, 630-636
24. Rivest, L., Fortin, C., and Morel, C. (1994) Tolerancing a solid model with a kinematic formulation. Computer-Aided Design, 26(6), 465-476
25. Chase, K.W., Magleby, S.P., Gao, J., and Sorensen, C.D. (1996) Including geometric feature variations in tolerance analysis of mechanical assemblies. HE Transactions, 28(10) 795-807
26. Gao, J., Chase, K.W., and Magleby, S.P. (1998) General 3-D tolerance analysis of mechanical assemblies with small kinematic adjustments. IIE Transactions, 30(4), 367-377
27. Joskowicz, L., Sacks, E., and Srinivasan, V. (1997) Kinematic tolerance analysis. Computer-Aided Design, 29(2), 147-157
28. Sacks, E. and Joskowicz, L. (1998) Parametric kinematic tolerance analysis of general planar systems. Computer-Aided Design, 30(9), 707-714
29. Turner, J.U. and Wozny, M.J. (1987) Tolerances in computer-aided geometric design. The Visual Computer, 3, 214-226
30. st Design Automation Conference, DE-Vol.82, pp.353-360
31. Ashiagbor, A., Liu, H. C., Nnaji, B.O. (1998) Tolerance control and propagation for the product assembly modeler. International Journal of Production Research, 36(1), 75-94
32. Takezawa, N. (1980) An improved method for establishing the process wise quality standard", Reports of Statistical and Applied Research, Union of Japanese Scientists and Engineers (JUSE), 27(3), 63-76
33. Liu, S. and Hu, S. (1997) Variation simulation for compliant sheet metal assemblies using finite element methods. ASME Journal of Manufacturing Science and Engineering, 119(3), 368-374
34. Liu, S.C., Hu, S.J., and Woo, T.C. (1996) Tolerance analysis for sheet metal assemblies. ASME Journal of Mechanical Design, 118, 62-67
35. Long, Y. and Hu, S. (1998) A unified model for variation simulation of sheet metal assemblies, in Geometric Design Tolerancing: Theories, Standards, and Applications, ed. by H.A. Elmaraghy, Longon: Chapman & Hall, pp.208-219
36. Camelio, J., Hu, S.J., and Ceglarek, D. (2003) Modeling variation propagation of multi-station assembly systems with compliant parts. ASME Journal of Mechanical Design, 125(4), 673-681
37. Camelio, J., Hu, S.J., and Marin, S.P. (2004) Compliant assembly variation analysis using component geometric covariance. ASME Journal of Manufacturing Science and Engineering, 126(2), 355-360
38. Merkley, K.G., Chase, K.W., Perry, E. (1996) An introduction to tolerance analysis of flexible assemblies, in Proceedings of the 1996 MSC World Users Conference, Newport Beach, CA, MacNeal_Schwendler Corp.
39. Merkley, K.G. (1998) Tolerance Analysis of Compliant Assemblies, Ph.D. thesis, Department of Mechanical Engineering, Brigham Young University
40. Bihlmaier, B.F. (1999) Tolerance Analysis of Flexible Assemblies Using Finite Element and Spectral Analysis, M.S. thesis, Department of Mechanical Engineering, Brigham Young University
41. Mudur, S.P. and Koparkar, P.A. (1984) Interval methods for processing geometric objects. IEEE Computer Graphics & Applications, 4(2), 7-17
42. Toth, D.L. (1985) On ray tracing parametric surfaces. Computer Graphics, 19(3), 171-179
43. Moore, M. and Wilhelms, J. (1988) Collision detection and response for computer animation. Computer Graphics, 22(4), 289-298
44. Duff, T. (1992) Interval arithmetic and recursive subdivision for implicit functions and Constructive Solid Geometry. Computer Graphics, 26(2), 131-138
45. Snyder, J. (1999) Generative Modeling for Computer Graphics and CAD: Symbolic Shape Design Using Interval Analysis, Cambridge: Academic Press
46. Hu, C.-Y., Maekawa, T., Patrikalakis, N.M., and Ye, X. (1997) Robust Interval Algorithm for Surface Intersections. Computer-Aided Design, 29(9), 617-627
47. Abrams, S.L., Cho, W., Hu, C.Y., Maekawa, T., Patrikalakis, N.M., Sherbrooke, E.C., and Ye, X. (1998) Efficient and reliable methods for rounded-interval arithmetic. Computer-Aided Design, 30(8), 657-665
48. Shen, G. and Patrikalakis, N.M. (1998) Numerical and geometric properties of interval B-Splines. International Journal of Shape Modeling, 4, 31-62
49. Tuohy, S.T., Maekawa, T., Shen G., and Patrikalakis, N.M. (1997) Approximation of measured data with interval B-Splines. Computer-Aided Design, 29(11), 791-799
50. Wallner, J., Krasauskas, R., and Pottmann, H. (2000) Error propagation in geometric constructions. Computer-Aided Design, 32(11), 631-641
51. Mukundan, H., Ko, K.H., and Patrikalakis, N. M. (2005) Intersections with validated error bounds for building interval solid models. In ASME Proceedings of Design Engineering Technical Conferences, Sept.24-28, 2005, Long Beach, CA, paper no. DETC2005-85268
52. Finch, W.W. and Ward, A.C. (1997) A set-based system for eliminating infeasible designs in engineering problems dominated by uncertainty, in ASME Proceedings of Design Engineering Technical Conference, Sept. 14-17, 1997, Sacramento, CA, paper no. DETC97/DTM-3886
53. Rao, S.S. and Berke, L. (1997) Analysis of uncertain structural systems using interval analysis. AIAA Journal, 35(4), 727-735
54. Rao, S.S. and Cao, L. (2002) Optimum design of mechanical systems involving interval parameters. ASME Journal of Mechanical Design, 124, 465-472
55. Muhanna, R.L. and Mullen, R.L. (1999) Formulation of fuzzy finite-element methods for solid mechanics problems. Computer-Aided Civil & Infrastructure Engineering, 14, 107-117
56. Muhanna, R.L. and Mullen, R.L. (2001) Uncertainty in mechanics problems - interval-based approach. ASCE Journal of Engineering Mechanics, 127(6), 557-566
57. Muhanna, R.L., Mullen, R.L., and Zhang, H. (2004) Interval finite element as a basis for generalized models of uncertainty in engineering mechanics, in Proceedings of NSF Workshop on Reliable Engineering Computing (REC'04), September 15-17, 2004, Georgia Institute of Technology, Savannah, GA, ed. by R.L. Muhanna and R.L. Mullen, pp.353-370
58. Wang, Y. (2004) Solving interval constraints in computer-aided design, in Proceedings of NSF Workshop on Reliable Engineering Computing (REC'04), September 15-17, 2004, Georgia Institute of Technology, Savannah, GA, ed. by R.L. Muhanna and R.L. Mullen, pp.251-267
59. Wang, Y. and Nnaji, B.O. (2006) Solving interval constraints by linearization in computer-aided design. Reliable Computing, in press
60. Yang, C.C., Marefat, M.M., and Ciarallo, F.W. (2000) Interval constraint networks for tolerance analysis and synthesis. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 14, 271-287
61. Gardenes, E., Sainz, M.A., Jorba, L., Calm, R., Estela, R., Mielgo, H., and Trepat, A. (2001) Modal intervals. Reliable Computing, 7(2), 77'-111
62. Markov, S. (2001) On the algebraic properties of intervals and some applications. Reliable Computing, 7(2), 113-127
63. Popova, E.D. (2001) Multiplication distributivity of proper and improper intervals. Reliable Computing, 7(2), 129-140
64. Shary, S.P. (2001) Interval Gauss-Seidel method for generalized solution sets to interval linear systems. Reliable Computing, 7(2), 141-155
65. Shary, S.P. (2002) A new technique in systems analysis under interval uncertainty and ambiguity. Reliable Computing, 8(2), 321-418
66. Armengol, J., Vehi, J., Trave-Massuyes, L., and Sainz, M.A. (2001) Application of modal intervals to the generation of error-bounded envelopes. Reliable Computing, 7(2), 171-185
67. Chase, K.W., Magleby, S.P., Gao, J. (1997) Tolerance analysis of two- and three- dimensional mechanical assemblies with small kinematic adjustments, in Advanced Tolerancing Techniques, ed. by Zhang, H.C., New York: John Wiley & Sons, pp. 103-137
68. Sainz, M.A., Gardenes, E., and Jorba, L. (2002) Formal solution to systems of interval linear or non-linear equations. Reliable Computing, 8(3), 189-211
69. Sainz, M.A., Gardenes, E., and Jorba, L. (2002) Interval estimations of solution sets to real-valued systems of linear or non-linear equations. Reliable Computing, 8(4), 283-305
70. Neumaier, A. (1990) Interval Methods for Systems of Equations (Cambridge: University Press)
71. Hansen, E.R. (1992) Bounding the Solution of Interval Linear Equations. SIAM Journal on Numerical Analysis, 29(5), 1493-1503
72. Ning, S. and Kearfott, R.B. (1997) A Comparison of Some Methods for Solving Linear Interval Equations. SIAM Journal on Numerical Analysis, 34(4), 1289-1305