Technological information concerning the integrated design of "net-shape" forged parts

International Journal of Advanced Manufacturing Technology

Volumn 31, Issue 3-4, 2006, Pages 247-257

  Berviller, Laurent ^a   Bigot, Régis ^a   Martin, Patrick ^a  

^a ARTS ET MÉTIERS PARISTECH   (France)

Author keywords

Forged parts; Integrated design; Net shape bevel gear; Technological knowledge

Indexed keywords

DATA ACQUISITION; KNOWLEDGE ACQUISITION; PROCESS ENGINEERING; PRODUCT DESIGN; QUALITY CONTROL;

FORGED PARTS; INTEGRATED DESIGN; NET-SHAPE BEVEL GEAR; TECHNOLOGICAL KNOWLEDGE;

AGILE MANUFACTURING SYSTEMS;

EID: 33751078024     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-005-0203-x     Document Type: Article

References (55)

1. Caporalli A, Gileno LA, Button ST (1998) Expert system for hot forging design. J Mater Process Technol 80-81:131-135
2. Doege E, Bohnsack R (2000) Closed die technologies for hot forging. J Mater Process Technol 98(2):165-170
3. Mamalis AG, Manolakos DE, Baldoukas AK (1996) Simulation of the precision forging of bevel gears using implicit and explicit FE techniques. J Mater Process Technol 57(1): 164-171
4. Groenbaek J, Birker T (2000) Innovations in cold forging die design. J Mater Process Technol 98(2):155-161
5. Langlois L, Bigot R, Ettaqi S, Bonin D (2004) Bi-material die manufactured from a bi-material sheet obtained by explosion cladding. In: Proceedings of the 2nd International Conference on Tribology in Manufacturing Processes (ICTMP 2004), Nyborg, Denmark, June 2004
6. Saiki H, Marumo Y, Minami A, Sonoi T (2001) Effect of the surface structure on the resistance to plastic deformation of a hot forging tool. J Mater Process Technol 113(1):22-27
7. Panjan P, Urankar I, Navinšek B, Terčelj M, Turk R, Čekada M, Leskovšek V (2002) Improvement of hot forging tools with duplex treatment. Surf Coat Technol 151-152:505-509
8. Douglas R, Kuhlmann D (2000) Guidelines for precision hot forging with applications. J Mater Process Technol 98(2): 182-188
9. Reinsch S, Müssig B, Schmidt B, Tracht K (2003) Advanced manufacturing system for forging products. J Mater Process Technol 138:16-21
10. Altan T, Lilly B (2001) Manufacturing of dies and molds. Annals CIRP 50:1-24
11. Fallböhmer P, Rodríguez CA, Özel T, Altan T (2000) High-speed machining of cast iron and alloy steels for die and mold manufacturing. J Mater Process Technol 98:104-115
12. Spencer DB, Mehrabian R, Flemings MC (1972) Rheological behavior of Sn-15 pct Pb in the crystallization range. Metall Trans 3(7):1925-1932
13. Chiarmetta G (1996) Thixoforming of automobile components. In: Proceedings of the 4th International Conference on Semi-Solid Processing of Alloys and Composites, Sheffield, UK, June 1996, pp 204-207
14. Chiarmetta G, Zanardi L (1994) Production of structural components by thixoforming aluminium alloys. In: Proceedings of the 3rd International Conference on Semi-Solid Processing of Alloys and Composites, Tokyo, Japan, June 1994, pp 235-244
15. Chenot J-L, Fourment L (2002) Numerical modelling of the forging process in industry. In: Proceedings of the 17th International Forging Congress, Cologne/Dusseldorf, Germany, June 2002, pp 57-68
16. Slagter W, Winter M (2002) Simulation - partnership solutions. In: Proceedings of the 17th International Forging Congress, Cologne/Dusseldorf, Germany, June 2002, pp 45-56
17. Altan T, Vazquez V (1997) Status of process simulation using 2D and 3D finite element method. What is practical today? What can we expect in the future? J Mater Process Technol 71 (1):49-63
18. Doege E, Behrens BA (1997) Reduce process chains due to the precision forging of gears - effect on the conventional forging technology. J Mater Process Technol 71(1): 14-17
19. Blondaz L (1999) Prise en compte de la fabricabilité, en conception intégrée de produits mécaniques. PhD thesis, Université Joseph Fournier, Grenoble, France
20. Bernard A (2000) Modéles et approches pour la conception et la production intégrées. J Européen Systèmes Automatisés 34 (2-3): 163-193
21. Tichkiewitch S, Brissaud D, Jeantet A, Tiger H (2001) Une interdisciplinarité forte au service de la recherche en outils et méthodologies de conception. In: Proceedings of the 2nd International Conference on Integrated Design and Production (CPI 2001), Fez, Morocco, October 2001, vol 115, pp 1-6
22. Vazquez V, Altan T (2000) New concepts in die design - physical and computer modeling applications. J Mater Process Technol 98(2):212-223
23. Thomas W, Oenoki T, Altan T (2000) Process simulation in stamping - recent applications for product and process design. J Mater Process Technol 98(2):232-243
24. Esche SV, Khamitkar S, Kinzel GL, Altan T (1996) Process and die design for multi-step forming of round parts from sheet metal. J Mater Process Technol 59(1-2):24-33
25. Doege E, Nägele H (1994) FE simulation of the precision forging process of bevel gears. Annals CIRP 43:241-244
26. Labrousse M, Bernard A, Véron P (2003) Contribution à la traçabilité des processus d'entreprise par une approche FBS. In: Proceedings of the 16éme Congrès Français de Mécanique (CFM 2003), Nice, France, September 2003
27. Labrousse M, Bernard A, Véron P (2003) Modéle FBS enrichi pour la modélisation des processus d'entreprise. In: Proceedings of the 3rd International Conference Integrated Design and Production (CPI 2003), Meknes, Morocco, October 2003, pp 165
28. Saucier A (1997) Un modèle multivues du produit pour le développemenl et l'utilisation de systémes d'aide à la conception en ingénierie mécanique. PhD thesis, Ecole Nationale Supérieure de Cachan, France
29. Vargas C (1995) Modélisation du processus de conception en ingénierie des systémes mécaniques. Mise en oeuvre basée sur la propagation de contraintes. Appplication à la conception d'une culasse automobile. PhD thesis, Ecole Nationale Supérieure de Cachan, France
30. Degoul P (1993) Le pouvoir de l'information avancée face au régne de la complexité. Annales des Mines, France
31. Gardoni M (1999) Maitrise de l'information non structurée et capitalisation de savoir et savoir-faire en ingénierie intégrée. Cas d'étude Aérospatiale. PhD thesis, Université de Metz, France
32. Colquhoun GJ, Baines RW, Crossley R (1993) A state of the art review of IDEF0. Int J Comput Integr Manuf 6(4):252-264
33. Bigot R, Martin P, Leleu S (2003) A contribution for technological data estimation for concurrent engineering using geometrical control of net shape forming parts. Proc IMechE J Eng Manuf 217(5):661-667
34. Eynard B (1999) Modélisation du produit et des activités de conception; Contribution à la conduite et à la traçabilité du processus d'ingénierie. PhD thesis, Université de Bordeaux, France
35. Pun L (1985) Systèmes industriels d'intelligence artificielle: outils de productique, 2nd edn. Editests, Paris, France
36. Jirathearanat S, Vazquez V, Rodriguez CA, Altan T (2000) Virtual processing - application of rapid prototyping for visualization of metal forming processes. J Mater Process Technol 98(1):116-124
37. Mamalis AG, Manolakos DE, Baldoukas AK (1996) Finite-element simulation of axisymmetric preforms in precision forging at elevated temperatures. J Mater Process Technol 57 (1-2):103-111
38. Fourment L, Chenot JL (1996) Optimal design for non-steady-state metal forming process. I. Shape optimization method. Int J Numer Methods Eng 39(1):33-50
39. Blanco E, Jeantet A, Boujut JF (1996) COPEST: de la construction à l'usage et vice-versa. Des Sci Technol 5 (12):93-118
40. Kim H, Altan T, Sevenler K (1992) Computer-aided part and processing-sequence design in cold forging. J Mater Process Technol 33(1-2):57-76
41. Doege E, Behrens BA (1999) Development of an automated precision forging process with integrated quality assurance. Prod Eng VI:47-50
42. Teti R, Langella A, D'Addona D (1999) An intelligent computation approach to process planning in multiple-step cold forging. Annals CIRP 48(1): 175-178
43. Xue D, Yadav S, Norrie DH (1999) Knowledge base and database representation for intelligent concurrent design. Comput Aided Des 31(2): 131-145
44. Doege E, Buchholz B (1998) Computer aided draft of operational sequences for hot die forging. Prod Eng V: 123-128
45. Dantan JY, Bruyére J, Bigot R, Martin P (2003) Functional tolerancing of gear with virtual boundary requirement. In: Proceedings of the 3rd International Conference Integrated Design and Production (CPI 2003), Meknes, Morocco, October 2003
46. Baudouin C, Bigot R, Leleu S, Muller N, Martin P (2004) Gear geometric control software: approach by entities. J Manuf Syst (in press)
47. Baudouin C, Leleu S, Coorevits T, Bigot R (2001) Caracterisation of measurement uncertainties for gears measured on coordinate measuring machine. In: Proceedings of the 10th International Metrology Congress (CIM 2001), Saint Louis, France, October 2001, vol 202, p 155
48. Hofmann C, Orr S (2005) Advanced manufacturing technology adoption - the German experience. Technovation 25 (7):711-724
49. Bakhshi-Juibari M, Pillinger I, Dean TA (1994) Development of an IKBS for forging die design. J Mater Process Technol 45:689-694
50. Lee YK, Lee SR, Lee CH, Yang DY (2001) Process modification of bevel gear forging using three-dimensional finite element analysis. J Mater Process Technol 113(1-3):59-63
51. Kim HS, Im YT (1995) Expert system for multi-stage cold-forging process design with a re-designing algorithm. J Mater Process Technol 54(1-4):271-285
52. Kim YJ, Chitkara NR (2001) Determination of preform shape to improve dimensional accuracy of the forged crown gear form in a closed-die forging process. Int J Mech Sci 43(3):853-870
53. Balan T (1996) Optimisation de forme des outils de forgeage par methode inverse. PhD thesis, Ecole Nationale Supérieure des Mines de Paris, France
54. Lapovok R (1998) Improvement of die life by minimisation of damage accumulation and optimisation of preform design. J Mater Process Technol 80-81:608-612
55. Bigot R, Leleu S, Martin P (2003) Forming machine qualification by analysis of manufactured parts geometry. Application to aluminium forming process. Int J Adv Manuf Technol 21:476-482