Evaluation of interface shear strength of composite liner system and stability analysis for a landfill lining system in Thailand

Geotextiles and Geomembranes

Volumn 24, Issue 6, 2006, Pages 371-393

  Bergado, D T ^a   Ramana, G V ^b   Sia, H I ^a   Varun, ^b  

^a ASIAN INSTITUTE OF TECHNOLOGY   (Thailand)

^b INDIAN INSTITUTE OF TECHNOLOGY DELHI   (India)

Author keywords

Composite liner system; Interface shear; Landfill; Tensile forces in geosynthetics

Indexed keywords

GEOSYNTHETIC MATERIALS; INTERFACES (MATERIALS); SAFETY FACTOR; SHEAR STRENGTH; STABILITY; TENSILE TESTING;

COMPACTED CLAY LINER; COMPOSITE LINER SYSTEM; GEOSYNTHETIC CLAY LINER;

LANDFILL LININGS;

GEOSYNTHETICS; INTERFACE; LANDFILL LINER; SHEAR STRENGTH; STABILITY ANALYSIS;

ASIA; EURASIA; SOUTHEAST ASIA; THAILAND;

CLAY LINER; INTERFACIAL PROPERTY; SHEAR PROPERTY; STABILITY; STRENGTH; TENSILE PROPERTY; TESTING;

EID: 33750974194     PISSN: 02661144     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.geotexmem.2006.04.001     Document Type: Article

References (54)

1. ACSIG, 2002. Report on the laboratory tests of geomembrane, geotextiles and geonet. Summitted to Professional Waste Technology (1999) Co., Ltd. for Sa Kaeo Industrial Waste Disposal Facility, School of Civil Engineering, Asian Institute of Technology, Pathumthani, Thailand.
2. ASTM D4595-86, 1994. Standard test method for tensile properties of geotextiles by the wide-width strip method. ASTM Standards and Other Specifications and Test Methods on the Quality Assurance of Landfill Liner System, ASTM, Philadelphia, PA, pp. 325-332.
3. ASTM D5321-92, 1994. Standard test method for determining the coefficient of soil and geosynthetics or geosynthetic and geosynthetic friction by the direct shear method. ASTM Standards and Other Specifications and Test Methods on the Quality Assurance of Landfill Liner System, ASTM, Philadelphia, PA, pp. 408-412.
4. ASTM D638-91, 1994. Standard test method for tensile properties of plastics. ASTM Standards and Other Specifications and Test Methods on the Quality Assurance of Landfill Liner System, ASTM, Philadelphia, PA, pp. 22-34.
5. ASTM D6496-04a, 2004. Test method for determining the average bonding peel strength between top and bottom layers of needle-punched geosynthetic clay liners. ASTM Standards and Other Specifications and Test Methods on the Quality Assurance of Landfill Liner System, ASTM, Philadelphia, PA, pp. 22-34.
6. Blumel, W., Brummermann, K., 1996. Interface friction between geosynthetics and soils and between different geosynthetics. In: De Groot, Den Hoedt and Termaat (Eds.), Geosynthetics: Applications, Design and Construction. Balkema, Rotterdam, Netherlands, pp. 209-216.
7. Blumel, W., Stoewahse, C., 1998. Geosynthetic Interface Friction Testing In Germany: Effect of Test Setups. In: Proceedings of 6th International Conference on Geosynthetics, 25-29 March, Atlanta, Georgia, USA, pp. 209-216.
8. Bouazza, A., 1998. Evaluation of soil-geosynthetics interaction for some landfills in Algiers. In: Proceedings of 6th International Conference on Geosynthetics, 25-29 March, Atlanta, GA, USA, pp. 59-462.
9. Briançon L., Girard H., and Poulain D. Slope stability of lining systems-experimental modeling of friction at geosynthetic interfaces. Geotextiles and Geomembranes 20 3 (2002) 147-172
10. Byrne, R.J., Kendall, J., Brown, S., 1992. Cause and mechanism of failure of Kettlemans Hills Landfill. In: Proceedings of ASCE Conference on Stability and Performance of Slopes and Embankment II, pp. 1-23.
11. De, A., Zimmie, T.F., 1998. Frictional Behavior of Landfill Liner Interfaces with Geonets. In: Proceedings of 6th International Conference on Geosynthetics, 25-29 March, Atlanta, Georgia, USA, pp. 443-446.
12. Dixon N., and Jones D.R.V. Engineering properties of solid waste, Geotextiles and Geomembranes 23 3 (2005) 205-233
13. Dixon N., and Jones D.R.V. Landfill lining stability and integrity: the role of waste settlement. Geotextiles and Geomembranes 23 1 (2005) 27-53
14. Edil T.B., Stark T.D., Evans W.D., and Sherry P.E. Municipal solid waste slope failure. I: Waste and foundation soil properties. Journal of Geotechnical and Geoenvironmental Engineering, ASCE 126 5 (2000) 397-407
15. Fassett, J.B., Leonards, G.A., Repetto, P.C., 1994. Geotechnical properties of municipal solid wastes and their use in landfill design. In: Proceedings of the WasteTech Conference, Charleston, SC.
16. Fishman K.L., and Pal S. Further study of geomembrane/cohesive soil interface shear behavior. Geotextiles and Geomembranes 13 9 (1994) 571-590
17. Fox P.J., Rowland M.G., and Scheithe J.R. Internal shear strength of three geosynthetic clay liners. Journal of Geotechnical and Geoenvironmental, ASCE 124 10 (1998) 933-944
18. Gabr M.A., and Valero S.N. Geotechnical properties of municipal solid waste. Geotechnical Testing Journal, GTJODJ 18 2 (1995) 241-251
19. GEO-SLOPE International Ltd., 1991. SLOPE/W for Stability Analysis: User's Guide. GEO-SLOPE, Calgary, Alta., Canada.
20. Gilbert R.B., Fernandez F., and Horsfield D.W. Shear strength of reinforced geosynthetic clay liner. Journal of Geotechnical and Geoenvironmental Engineering, ASCE 122 4 (1996) 259-266
21. Grisolia, M., Napoleoni, Q., 1996. Geotechnical characterisation of municipal solid waste: choice of design parameters. In: Proceedings of the Second International Congress on Environmental Geotechnics, vol. 2, Osaka, Japan, 2, pp. 641-646.
22. Heerten, G., Saathoff, F., Scheu, C., von Maubeuge, K.P., 1995. On the long-term shear behavior of geosynthetic clay liners (GCLs) in capping sealing systems. In: Proceedings of Geosynthetic Clay Liners, Nuremberg, April 1995, pp. 141-150.
23. Hsieh C., and Hsieh M.W. Load plate rigidity and scale effects on the frictional behavior of sand/geomembrane interfaces. Geotextiles and Geomembranes 21 (2003) 25-47
24. Jones, D.R.V., Dixon, N., 1997. Shear strength of waste and its use in landfill stability analysis. In: Proceedings, Conference on Geoenvironmental Engineering, University of Wales, Cardiff, pp. 343-385.
25. Jones D.R.V., and Dixon N. Shear strength properties of geomembrane/geotextile interfaces. Geotextiles and Geomembranes 16 4 (1998) 45-71
26. Kavazanjian Jr., E., Matasovic, N., Bonaparte, R., Schmermann, G.R., 1995. Evaluation of MSW properties for seismic analysis. In: Proceedings, Geoenvironment 2000, vol. II, New Orleans, LA, pp. 1126-1141.
27. Koerner R.M. Designing with Geosynthetics. fourth ed (1997), Prentice-Hall, Englewood Cliffs, NJ
28. Koerner R.M., and Hwu B.L. Stability and tension considerations regarding cover soils on geomembrane lined slopes. Geotextiles and Geomembranes 10 4 (1991) 335-355
29. Koutsourais M.M., Sprague C.J., and Pucetas R.C. Interfacial friction study of cap and liner components for landfill design. Geotextiles and Geomembranes 10 5-6 (1991) 531-548
30. Landva, A.O., Clark, J.I., 1990. Geotechnics of waste fills. In: Geotechnics of Waste Fills-Theory and Practice, ASTM STP 1070, Philadelphia, pp. 86-103.
31. Liu C.N. Tension of geosynthetics material regarding soils on landfill liner slopes. Proceedings, National Science Council ROC(A) 25 4 (2001) 211-218
32. Long J.H., Gilbert R.B., and Daly J.J. Geosynthetics loads in landfill slopes: displacement compatibility. Journal of Geotechnical Engineering 120 11 (1995) 2009-2025
33. Long, J.H., Gilbert, R.B., Daly, J.J., 1995b. Effect of waste settlement on sloped lining system. In: Geosynthetics '95 Conference Proceedings, Nashville, TN, USA, 2, pp. 729-744.
34. Lydick, L.D., Zagorski, G.A., 1991. Interface friction of geonets: a literature survey. Geotextiles and Geomembranes 10, 549-558.
35. Manassero, M., Van Impe, W.F., Bouazza, A., 1996. Waste disposal and containment: state of the art report. In: Proceedings of the Second ICEG, Osaka. A.A. Balkema, Rotterdam.
36. Martin, J.P., Koerner, R.M., Whitty, J.E., 1984. Experimental friction evaluation of slippage between geomembranes, geotextiles and soils. In: Proceedings of the International Conference on Geomembranes, Denver, CO, June 20-23, pp. 191-196.
37. Mitchell J.K., Seed R.B., and Seed H.B. Kettleman Hills Waste Landfill Slope Failure I: Liner-system properties. Journal of Geotechnical Engineering, ASCE 116 4 (1990) 647-668
38. Negussey D., Wijewickreme W.K.D., and Vaid Y.P. Geomembrane interface friction. Canadian Geotechnical Journal 26 (1989) 165-169
39. Orman M.E. Interface Shear-Strength Properties of Roughened HDPE. Journal of Geotechnical Engineering, ASCE 120 4 (1994) 758-761
40. Oweis, I.S., Khera, R., 1986. Criteria for geotechnical construction on sanitary landfills. In: Proceedings of the Symposium on Environ Geotechnology, vol. 1, Allenton, PA, pp. 205-223.
41. Pelkey S.A., Valsangkar A.J., and Landva A. Shear displacement dependent strength of municipal solid waste and its major constituent. Geotechnical Testing Journal 24 4 (2001) 381-390
42. Qian X., Koerner R.M., and Gray H.D. Geotechnical Aspects of Landfill Design and Construction (2001), Prentice-Hall, Englewood Cliffs, NJ
43. Reddy D.V., and Butul B. A Comprehensive Literature Review of Liner Failures and Longevity (1999), Florida Center for Solid and Hazardous Waste Management, University of Florida, Florida, US
44. Reddy K.R., Kosgi S., and Motan S. Interface shear behavior of landfill composite liner systems: a finite element study. Geosynthetics International 3 2 (1996) 247-275
45. Rowe R.K., and Jones C.J.F.P. Geosynthetics: Innovative Materials and Rational Design (2000), GeoEng2000: An International Conference on Geotechnical and Geological Engineering, Melbourne, Australia pp. 1124-1155
46. Sabatini P.J., Griffin L.M., Bonaparte R., Espinoza R.D., and Giroud J.P. Reliability of state of practice for selection of shear strength parameters for waste containment system stability analyses. Geotextiles and Geomembranes 20 4 (2002) 241-262
47. Saxena, S.K., Wong, Y.T., 1984. Friction characteristics of a geomembrane. In: Proceedings of International Conference on Geomembranes, Denver, CO, pp. 187-190.
48. Seed R.B., Mitchell J.K., and Seed H.B. Kettleman Hills Waste Landfill Slope Failure. II: Stability analysis. Journal of Geotechnical Engineering, ASCE 116 4 (1990) 669-691
49. Simpson, B.E., 2000. Five Factors Influencing the Clay/Geomembrane Interface. In: Proceedings, Geoenvironment 2000, vol. II, New Orleans, LA, pp. 995-1004.
50. Stark T.D., Williamson T.A., and Eid H.T. HDPE geomembrane/geotextile interface shear strength. Journal of Geotechnical Engineering, ASCE 122 3 (1996) 197-203
51. Tan S.A., Chew S.H., and Wong W.K. Sand-geotextile interface shear strength by torsional ring shear tests. Geotextiles and Geomembrane 16 3 (1998) 161-174
52. Von Maubeuge K.P., and Ehrenberg H. Comparison of peel bond and shear tensile test methods for needlepunched geosynthetic clay liners. Geotextiles and Geomembrane 18 2-4 (2000) 161-174
53. Von Maubeuge, K.P., Quirk, C.M., 2000. Geosynthetic clay liners and long-term slope stability, http://www.bentofix.com/naue/p/waste2000_shear.pdf.
54. Wasti Y., and Ozduzgun Z.B. Geomembrane-geotextile interface Shear properties as determined by inclined board and direct shear box tests. Geotextiles and Geomembranes 19 1 (2001) 45-57