Finite-element analysis of coupled nonlinear heat and moisture transfer in wood

Numerical Heat Transfer; Part A: Applications

Volumn 50, Issue 9, 2006, Pages 851-864

  Eriksson, John ^a   Ormarsson, Sigurdur ^a,b   Petersson, Hans ^b  

^a CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

^b LINNAEUS UNIVERSITY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

DRYING; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; MOISTURE; NONLINEAR EQUATIONS; SATURATION (MATERIALS COMPOSITION); WOOD;

MOISTURE FLOW; MOISTURE TRANSFER; MOISTURE TRANSPORTS MECHANISMS; TYPICAL KILN-DRYING CONDITION;

HEAT TRANSFER;

FIBER SATURATION POINT; HEAT TRANSFER; MOISTURE; SATURATION; WOOD;

EID: 33750955460     PISSN: 10407782     EISSN: 15210634     Source Type: Journal    
DOI: 10.1080/10407780600669282     Document Type: Article

References (29)

1. J. J. Nijdam, T. A. G. Langrish, and R. B. Keey, A High-Temperature Drying Model for Softwood Timber, Chem. Eng. Sci., vol. 55, pp. 3585-3598, 2000.
2. S. Pang, Moisture Content Gradient in Softwood Board during Drying: Simulation from a 2-D Model and Measurement, Wood Sci. Technol., vol. 30, pp. 165-178, 1996.
3. P. Perré and T. W. Turner, A 3-D Version of TransPore: A Comprehensive Heat and Mass Transfer Model for Simulating the Drying of Porous Media, Int. J. Heat Mass Transfer, vol. 42, pp. 4501-4521, 1999.
4. M. A. Stanish, G. S. Schajer, and F. A. Kayihan, Mathematical Model of Drying for Hygroscopic Porous Media, AIChE J., vol. 32, pp. 1301-1311, 1986.
5. M. C. Melaaen, Numerical Analysis of Heat and Mass Transfer in Drying and Pyrolysis of Porous Media, Numer. Heat Transfer A, vol. 29, pp. 331-355, 1996.
6. J. Claesson, Mathematical Modelling of Moisture Transport, Proc. Int. Conf. on Wood-Water Relations, Copenhagen, Denmark, 16-17 June 1997.
7. S. Pang, Relationship between a Diffusion Model and a Transport Model for Softwood Drying, Wood Fiber Sci., vol. 29, pp. 58-67, 1997.
8. S. Ormarsson, Numerical Analysis of Moisture-Related Distortions in Sawn Timber, Doctoral thesis, Publication 99:7, Department of Structural Mechanics, Chalmers University of Technology, Göteborg, Sweden, 1999.
9. A. Ranta-Maunus, H. Forsén, and V. Tarvainen, Analysis of Case Hardening, Proc. 3rd Workshop on Softwood Drying to Specific End-Uses, Helinski, Finland, 11-13 June 2001.
10. S. Svensson, Internal Stress in Wood Caused by Climate Variations, Doctoral thesis, Rep. TVBK-101, Department of Structural Engineering, Lund University of Technology, Lund, Sweden, 1997.
11. J. F. Siau and S. Avramidis, Application of a Thermodynamic Model to Nonisothermal Diffusion Experiments, Wood Sci. Technol., vol. 27, pp. 131-136, 1992.
12. P. Horáček, Modeling of Coupled Moisture and Heat Transfer during Wood Drying, Proc. 8th Int. IUFRO Wood Drying Conf., Brasov, Romania, 24-29 August 2003.
13. J. F. Siau, Wood: Influence of Moisture on Physical Properties, Department of Wood Science and Forest Products, Virginia Polytechnic Institute and State University, Blacksburg, VA, 1995.
14. M. Ping and G. Lianbai, Water Transfer of Mason Pine Lumber during High Temperature Drying, Holz als Roh- und Werkstoff, vol. 61, pp. 349-354, 2003.
15. J. Arfvidsson and J. Claesson, Isothermal Moisture Flow in Building Materials: Modelling, Measurements and Calculations Based on Kirchhoffs Potential, Build. Environ., vol. 35, pp. 519-536, 2000.
16. S. Avramidis, S. G. Hatzikiriakos, and J. F. Siau, An Irreversible Thermodynamics Model for Unsteady-State Nonisothermal Moisture Diffusion in Wood, Wood Sci. Technol., vol. 28, pp. 349-358, 1994.
17. S. Avramidis and S. G. Hatzikiriakos, Convective Heat and Mass Transfer in Nonisothermal Moisture Desorption, Holzforschung, vol. 49, pp. 163-167, 1995.
18. A. V. Luikov, Heat and Mass Transfer in Capillary Porous Bodies, Pergamon Press, Oxford, UK, 1966.
19. L. S. Oliveira and K. Haghighi, Conjugate Heat and Mass Transfer in Convective Drying of Porous Media, Numer. Heat Transfer A, vol. 34, pp. 105-117, 1998.
20. J.-V. Daurelle, F. Topin, and R. Occelli, Modelling of Coupled Heat and Mass Transfers with Phase Change in a Porous Medium: Application to Superheated Steam Drying, Numer. Heat Trasfer A, vol. 33, pp. 29-63, 1998.
21. J. F. Siau and S. Avramidis, Application of a Thermodynamic Model to Experiments on Nonisothermal Diffusion of Moisture in Wood, Wood Sci. Technol., vol. 27, pp. 131-136, 1993.
22. N. S. Ottosen and M. Ristinmaa, The Mechanics of Constitutive Modelling, Vol. 2, Division of Solid Mechanics, Lund, Sweden, 1999.
23. J. T. R. Hughes, Unconditional Stable Algorithms for Nonlinear Heat Conduction, Comput Meth. Appl. Mech. Eng., vol. 10, pp. 135-139, 1977.
24. K.-J. Bathe, Finite Element Procedures, Prentice Hall, Englewoodcliffs, NJ, 1996.
25. ABAQUS, Hibbitt, Karlsson & Sorensen, Inc., 〈www.hks.com〉.
26. W. Olek, J. Weres, and R. Guzenda, Effects of Thermal Conductivity Data on Accuracy of Modeling Heat Transfer in Wood, Holzforschung, vol. 57, pp. 317-325, 2003.
27. USDA: U.S. Department of Agriculture, FPL: Forest Products Laboratory, GTR: General Technical Report, Wood Handbook-Wood as an Engineering Material, USDA Forest Products Laboratory, Gen. Tech. Rep. FPL-GTR-113, Forest Products Laboratory, Madison, Wisconsin, 1999.
28. A. Hukka, The Effective Diffusion Coefficient and Mass Transfer Coefficient of Nordic Softwoods as Calculated from Direct Drying Experiments, Holzforschung, vol. 53, pp. 534-540, 1999.
29. S. Avramidis, Evaluation of "Three-Variable" Models for the Prediction of Equilibrium Moisture Content in Wood, Wood Sci. Technol., vol. 23, pp. 251-258, 1989.