Analytical modeling of radial fluid migration in the boundary layer of axial flow turbomachinery blades

Proceedings of the ASME Turbo Expo

Volumn 6 PART A, Issue , 2006, Pages 261-270

  Vad, János ^a  

^a BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS   (Hungary)

Author keywords

Analytical fluid dynamics; Axial flow turbomachinery; Stall; Three dimensional turbomachinery flow

Indexed keywords

ANALYTICAL FLUID DYNAMICS; AXIAL FLOW ROTORS; RADIAL OUTWARD MIGRATION; THREE DIMENSIONAL TURBOMACHINERY FLOW;

ACCELERATION; BOUNDARY LAYERS; FLUID DYNAMICS; NAVIER STOKES EQUATIONS; ROTORS; TURBOMACHINE BLADES;

AXIAL FLOW TURBOMACHINERY;

EID: 33750877971     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/GT2006-90523     Document Type: Conference Paper

References (28)

1. Goltz, I., Kosyna, G., Wulff, D., Schrapp, H., and Bross, S., 2004, "Part Load Operating Performance and Stall Inception of a Single-Stage Axial-Flow Pump," Proceedings ISROMAC10, Honolulu, Hawaii, Paper No. ISROMAC10-2004-014.
2. Yamaguchi, N., Tominaga, T., Hattori, S., and Mitsuhashi, T., 1991, "Secondary-Loss Reduction by Forward-Skewing of Axial Compressor Rotor Blading," Proceedings Yokohama International Gas Turbine Congress, Yokohama, Japan, pp. II.61-II.68.
3. Gallimore, S. J., Bolger, J. J., Cumpsty, N. A., Taylor, M. J., Wright, P. I. and Place, J. M. M., 2002, "The Use of Sweep and Dihedral in Multistage Axial Flow Compressor Blading," - Parts I and II. ASME J Turbomachinery, 124, pp. 521-541.
4. Corsini, A. and Rispoli, F., 2004, "Using Sweep to Extend the Stall-Free Operational Range in Axial Fan Rotors," Proceedings IMechE, Part A - J Power Energy, 218, pp. 129-139.
5. Lohász M. M., Rambaud P. and Benocci C., 2005, "Flow Features in a Fully Developed Ribbed Duct Flow as a Result of LES," Proceedings ERCOFTAC International Symposium on Engineering Turbulence Modeling and Measurements (ETMM6), Sardinia, Italy, pp. 267-276.
6. Gbadebo, S. A., Cumpsty, N. A., and Hynes, T. P., 2005, "Three-Dimensional Separations in Axial Compressors," ASME Turbomachinery, 127, pp. 331-339.
7. Place, J. M. M. and Cumpsty, N. A., 1998, Discussion in Sasaki, T. and Breugelmans, F., 1998, "Comparison of Sweep and Dihedral Effects on Compressor Cascade Performance," ASME Turbomachinery, 20, pp. 454-464.
8. Shabbir, A. and Adamczyk, J. J., 2004, "Flow Mechanism for Stall Margin Improvement due to Circumferential Casing Grooves on Axial Compressors," ASME Paper GT2004-53903.
9. Lakshminarayana, B., 1996, "Fluid Dynamics and Heat Transfer of Turbomachinery," John Wiley & Sons, Inc.
10. Inoue, M. and Kuroumaru, M., 1984, "Three-Dimensional Structure and Decay of Vortices Behind an Axial Flow Rotating Blade Row," ASME Engineering Gas Turbines Power, 106, pp. 561-569.
11. Nagl, G., 1995, "Experimentelle Untersuchung der dreidimensionalen Strömung in einer Axialpumpe mit rotierenden Drucksonden," PhD Thesis, Technische Universität Graz, Institut für Hydraulische Strömungsmaschinen.
12. Vad, J., and Bencze, F., 1998, "Three-Dimensional Flow in Axial Flow Fans of Non-Free Vortex Design," Int J Heat Fluid Flow, 19, pp. 601-607.
13. Corsini, A. and Rispoli, F., 2005, "Flow Analyses in a High-Pressure Axial Ventilation Fan with a Non-Linear Eddy-Viscosity Closure," Int J Heat Fluid Flow, 26, pp. 349-361.
14. th International Symposium onEngineering Turbulence Modelling and Experiments, Corsica, France, pp. 751-760.
15. Vad, J., Koscsó, G., Gutermuth, M., Kasza, Zs., Tábi, T. and Csörgo, T., 2005, "Reduction of Flow Generated Noise of Airfoils by Means of Acoustically Soft Coating," Proceedings VSTech 2005, The First International Symposium on Advanced Technology of Vibration and Sound, Hiroshima, Japan, pp. 29-34.
16. Dring, R. P., Joslyn, H. D. and Hardin, L. W., 1982, "An Investigation of Axial Compressor Rotor Aerodynamics," ASME Engineering Power, 104, pp. 84-96.
17. Pope, S. B., 2000, "Turbulent Flows," Cambridge University Press.
18. Lakshminarayana, B., Davino, R. and Pouagare, M., 1982, "Three-Dimensional Flow Field in the Tip Region of a Compressor Rotor Passage - Part II: Turbulence Properties," ASME Engineering Power, 104, pp. 772-781.
19. Furukawa, M., Inoue, M., Saiki, M. and Yamada, K., 1999, "The Role of Tip Leakage Vortex Breakdown in Compressor Rotor Aerodynamics," ASME Turbomachinery, 121, pp. 469-480.
20. Horlock, J. H., 1973, "Axial Flow Compressors," Kreiger Publishing Co., Melbourne, FL.
21. Beiler, M.G., and Carolus T.H., 1999, "Computation and Measurement of the Flow in Axial Flow Fans With Skewed Blades," ASME Turbomachinery, 121, pp. 59-66.
22. Meixner, H. U., 1995, "Vergleichende LDA-Messungen an ungesichelten und gesichelten Axialventilatoren," Dissertation Universität Karlsruhe, VDI-Verlag, Reihe 7, No. 266, Düsseldorf.
23. HELIOS Hauptkatalog 2001/2002. Druckschrift-Nr. 95 178.005/03.01
24. Sanger, N. L. and Shreeve, R. P., 1986, "Comparison of the Calculated and Experimental Cascade Performance for Controlled-Diffusion Compressor Stator Blading," ASME Turbomachinery, 108, pp. 42-50.
25. Clemen, C., Gümmer, V., Goller, M., Rohkamm, H., Stark, U. and Saathoff, H., 2004, "Tip-Aerodynamics of Forward-Swept Rotor Blades in a Highly-Loaded Single-Stage Axial-Flow Low-Speed Compressor," Proceedings ISROMAC10, Honolulu, Hawaii, Paper No. ISROMAC10-2004-027.
26. Vad, J., Kwedikha, A. R. A., and Jaberg, H., 2004, "Influence of Blade Sweep on the Energetic Behavior of Axial Flow Turbomachinery Rotors at Design Flow Rate," ASME Paper GT2004-53544.
27. th European Conference Turbomachinery Fluid Dynamics and Thermodynamics, Lille, France, pp. 46-55.
28. th European Conference Turbomachinery Fluid Dynamics and Thermodynamics, Prague, Czech Republic, pp. 151-161.