Tomographic analysis and FE-simulations of MMC-microstructures under load

Progress in Biomedical Optics and Imaging - Proceedings of SPIE

Volumn 6318, Issue , 2006, Pages

  Crostack, Horst Artur ^a   Nellesen, Jens ^b   Fischer, Gottfried ^b   Schmauder, Siegfried ^c   Weber, Ulrich ^c   Beckmann, Felix ^d  

^a TU DORTMUND UNIVERSITY   (Germany)

^b Institute for Research and Transfer   (Germany)

^c UNIVERSITY OF STUTTGART   (Germany)

^d INSTITUTE OF MATERIALS RESEARCH   (Germany)

Author keywords

FEM; Micromechanics; MMC; X ray microtomography

Indexed keywords

COMPOSITE MICROMECHANICS; COMPUTERIZED TOMOGRAPHY; DATA ACQUISITION; FINITE ELEMENT METHOD; MICROSTRUCTURE; SYNCHROTRON RADIATION;

BOUNDARY CONSTRAINTS; POLYCHROMATIC RADIATION; TOMOGRAMS; X-RAY MICROTOMOGRAPHY;

METALLIC MATRIX COMPOSITES;

EID: 33750683340     PISSN: 16057422     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.680493     Document Type: Conference Paper

References (22)

1. J. Llorca and J. Segurado, "Three-dimensional multiparticle cell simulations of deformation and damage in sphere-reinforced composites," Mater. Sci. Eng. A 365, pp. 267-274, 2004.
2. W. Gaudig, R. Mellert, U. Weber, and S. Schmauder, "Self-consistent one-particle 3D unit cell model for simulation of the effect of graphite aspect ratio on Young's modulus of cast-iron," Comput. Mater. Sci. 28, pp. 654-662, 2003.
3. N. Chawla, V. Ganesh, and B. Wunsch, "Three-dimensional (3D) microstructure visualization and finite element modeling of the mechanical behaviour of SiC particle reinforced aluminium composites," Scr. Mater. 51, pp. 161-165, 2004.
4. H.-A. Crostack, G. Fischer, E. Soppa, S. Schmauder, and Y.-L. Liu, "Localization of strain in MMCs studied by a SEM-based grating method," J. Microsc. 201(2), p. 171, 2001.
5. A. Ognjenovic, Experimentelle Untersuchung des inhomogenen Verformungsverhaltens bei Scher- und PLC-Bandbildung. PhD thesis, Universität Dortmund, 2005.
6. Y.-L. Liu and G. Fischer, "In situ measurement of local strain in a metal matrix composite by the object grating technique," Scr. Mater. 36(10), pp. 1187-1194, 1997.
7. K. H. Khor, J.-Y. Buffiére, W. Ludwig, H. Toda, H. S. Ubhi, P. J. Gregson, and I. Sinclair, "In situ high resolution synchrotron X-ray tomography of fatigue crack closure micromechanisms," J. Phys.: Condens. Matter 16, pp. 3511-3515, 2004.
8. L. Babout, E. Maire, J. Y. Buffière, and R. Fougères, "Characterization by X-ray computed tomography of decohesion, porosity growth and coalescence in model matrix composites," Acta Mater. 49, pp. 2055-2063, 2001.
9. U. Bonse, R. Nusshardt, F. Busch, R. Pahl, J. H. Kinney, Q. C. Johnson, R. A. Saroyan, and M. C. Nichols, "X-ray tomographic microscopy of fibre-reinforced materials," J. Mater. Sci. 26, pp. 4076-4085, 1991.
10. F. Beckmann, U. Bonse, F. Busch, and O. Günnewig, "X-Ray Microtomography (μCT) Using Phase Contrast for the Investigation of Organic Matter," J. Comput. Assist. Tomogr. 21(4), pp. 539-553, 1997.
11. J.-Y. Buffière, E. Maire, P. Cloetens, G. Lormand, and R. Fougères, "Characterization of Internal Damage in a MMC Using X-ray Synchrotron Phase Contrast Microtomography," Acta Mater. 47(5), pp. 1613-1625, 1999.
12. P. Cloetens, M. Pateyron-Salomé, J.-Y. Buffière, G. Peix, J. Baruchel, F. Peyrin, and M. Schlenker, "Observation of microstructure and damage in materials by phase sensitive radiography and tomography," J. Appl. Phys. 81(9), pp. 5878-5886, 1997.
13. S. F. Nielsen, F. Beckmann, H. F. Poulsen, and J. A. Wert, "Measurement of the components of plastic displacement gradients in three dimensions," Mater. Sci. Eng. A 387-389, pp. 336-338, 2004.
14. H.-A. Crostack, J. Nellesen, H. Blum, T. Rauscher, F. Beckmann, and G. Fischer, "Analysis of the material behaviour of metal-matrix composites under tension by synchrotron radiation based microtomography and FE-calculations," in Developments in X-ray Tomography IV, U. Bonse, ed., Proc. SPIE 5535, pp. 493-504, 2004.
15. R. H. Huesman, G. T. Gullberg, W. L. Greenberg, and T. F. Budinger, "RECLBL Library Users Manuel - Donner Algorithms for Reconstruction Tomography," Tech. Rep. PUB214, Lawrence Berkeley Laboratory, Berkeley, California, 1977.
16. L. A. Feldkamp, L. C. Davis, and J. W. Kress, "Practical cone-beam algorithm," J. Opt. Soc. Am. A 1, pp. 612-619, June 1984.
17. W. E. Lorensen and H. E. Cline, "Marching Cubes: A High Resolution 3D Surface Construction Algorithm," Comput Graphics 21, pp. 163-169, July 1987.
18. W. Schroeder, K. Martin, and B. Lorensen, The Visualization Toolkit: An Object-Oriented Approach To 3D Graphics, Kitware, New York, 3rd ed., 2004.
19. C. Hadac, "Generierung optimierter Oberflächennetze für die 3D-FE-Simulation auf Basis von CT-Daten," Master's thesis, Universität Dortmund, 2006.
20. MSC Software Corporation, MSC.Patran 2005.
21. S. Hönle, Micromechanical Modelling of Deformation and Fracture of Graded WC/Co Hard Metals. PhD thesis, Universität Stuttgart, Max-Planck-Institut (MPI) für Metallforschung (Stuttgart), 1998.
22. ABAQUS Deutschland GmbH, ABAQUS Version 6.5.