Microstructural development of adiabatic shear bands in ultra-fine-grained low-carbon steels fabricated by equal channel angular pressing

Materials Science and Engineering: A

Volumn 441, Issue 1-2, 2006, Pages 308-320

  Hwang, Byoungchul ^a   Lee, Sunghak ^b   Kim, Yong Chan ^c   Kim, Nack J ^b   Shin, Dong Hyuk ^d  

^a Korea Institute of Machine and Materials   (South Korea)

^b Pohang University of Science and Technology (POSTECH)   (South Korea)

^c Research Institute of Industrial Science and Technology (RIST)   (South Korea)

^d Hanyang University   (South Korea)

Author keywords

Adiabatic shear band; Annealing; Dynamic torsional test; Equal channel angular pressing (ECAP); Ultra fine grained low carbon steel

Indexed keywords

ANNEALING; MICROSTRUCTURE; PLASTIC DEFORMATION; RECRYSTALLIZATION (METALLURGY); TEMPERATURE; TORSION TESTING; TRANSMISSION ELECTRON MICROSCOPY;

ADIABATIC SHEAR BAND; DYNAMIC TORSIONAL TEST; EQUAL CHANNEL ANGULAR PRESSING; ULTRA-FINE-GRAINED LOW-CARBON STEEL;

CARBON STEEL;

ANNEALING; CARBON STEEL; MICROSTRUCTURE; PLASTIC DEFORMATION; RECRYSTALLIZATION (METALLURGY); TEMPERATURE; TORSION TESTING; TRANSMISSION ELECTRON MICROSCOPY;

EID: 33750625958     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2006.08.045     Document Type: Article

References (44)

1. Rogers H.C. Annu. Rev. Mater. Sci. 9 (1979) 283
2. Timothy S.P., and Hutching I.M. Acta Metall. 33 (1985) 667
3. Oh C.-S., Han H.N., Lee C.G., Lee T.-H., and Kim S.-J. Met. Mater. Int. 10 (2004) 399
4. Meyers M.A. Dynamic Behavior of Materials (1994), John Wiley & Sons, New York
5. Hartley K.A., Duffy J., and Hawley R.H. J. Mech. Phys. Solids 35 (1987) 283
6. Marchand A., and Duffy J. J. Mech. Phys. Solids 36 (1988) 251
7. Wittman C.L., Meyers M.A., and Pak H.-R. Metall. Trans. 21A (1990) 707
8. Wingrove A.L. J. Aust. Inst. Met. 16 (1971) 67
9. Cho K.M., Lee S., Nutt S.R., and Duffy J. Acta Metall. 41 (1993) 923
10. J.H. Beatty, L.W. Meyers, M.A. Meyers, S. Nemat-Nasser, US Army Materials Technical Laboratory Report, MTL TR 90-54, 1991.
11. Meyer M.A., and Pak H.-.R. Acta Metall. 34 (1986) 2493
12. Hartherly M., and Malin A.S. Scripta Metall. 18 (1983) 449
13. Andrade U.R., Meyers M.A., Vecchio K.S., and Chokshi A.H. Acta Metall. Mater. 42 (1994) 3183
14. Nesterenko V.F., Meyers M.A., LaSalvia J.C., Bondar M.P., Chen Y.J., and Lukyanov Y.L. Mater. Sci. Eng. A229 (1997) 23
15. Xu Y.B., Zhong W.L., Chen Y.J., Shen L.T., Liu Q., Bai Y.L., and Meyers M.A. Mater. Sci. Eng. A229 (1997) 287
16. Liu Q., Xu Y.B., Lai Z.H., Shen L.T., and Bai Y.L. Mater. Sci. Eng. A276 (2000) 250
17. Meyers M.A., Xu Y.B., Xue Q., Perez-Prado M.T., and McNelley T.R. Acta Mater. 51 (2003) 1307
18. Me-Bar Y., and Shechtman D.S. Mater. Sci. Eng. A58 (1983) 181
19. Derep J.D. Acta Metall. 35 (1987) 1245
20. Akhmadeev N.A., Kobelev N.P., Mulyukov R.R., Soifer Y.M., and Valiev R.Z. Acta Metall. Mater. 41 (1993) 1041
21. Shin D.H., Kim Y.S., and Lavernia E.J. Acta Mater. 49 (2000) 2387
22. Valiev R.Z., Islamgaliev R.K., and Alexandrov I.V. Prog. Mater. Sci. 45 (2000) 103
23. Park K.T., Kim Y.S., Lee J.G., and Shin D.H. Mater. Sci. Eng. A293 (2000) 165
24. Lee T.-H., Oh C.-S., Lee C.G., Kim S.-J., and Takaki S. Met. Mater. Int. 10 (2004) 231
25. Kolsky H. Proc. Phys. Soc. 62B (1949) 676
26. Gilat A. Torsional Kolsky Bar Testing, ASM Handbook, vol. 8 (2000), ASM International, Metals Park, OH p. 505
27. Shiota Y., Tomota Y., Moriai A., and Kamiyama T. Met. Mater. Int. 11 (2005) 371
28. Lee H.S., Hwang B., Lee S., Lee C.G., and Kim S.J. Metall. Mater. Trans. 35A (2004) 2373
29. Hwang B., Lee H.S., Kim Y.G., Lee S., Ahn B.D., Shin D.H., and Lee C.G. Metall. Mater. Trans. 36A (2005) 389
30. Rohde R.W., Butcher B.M., Holland J.R., and Karnes C.H. Metallurgical Effects at High Strain Rates (1973), Plenum Press, New York
31. Meyers M.A., and Murr L.E. Shock Waves and High-Strain-Rate Phenomena in Metals (1981), Plenum Press, New York
32. Han H.N., Oh C.-S., Suh D.W., Lee C.G., Lee T.-H., and Kim S.-J. Met. Mater. Int. 10 (2004) 221
33. Mataya M.C., Carr M.J., and Krauss G. Metall. Trans. 13A (1982) 1263
34. Murr L.E., Staudhammer K.P., and Meyers M.A. Metallurgical Applications of Shockwave and High-Strain-Rate Phenomena (1986), Marcel Dekker Inc.
35. Grebe A., Pak H.-R., and Meyers M.A. Metall. Trans. 16A (1985) 761
36. Hughes D.A., and Hansen N. Acta Mater. 45 (1997) 3871
37. Sevillano J.G., van Houtte P., and Aernoudt E. Prog. Mater. Sci. 25 (1981) 69
38. Yeung W.Y., and Duggan B.J. Acta. Mater. 34 (1986) 653
39. Humphreys F.J., and Hatherly M. Recrystallization and Related Annealing Phenomena (1995), Oxford, Pergamon
40. Derby B. Acta Metall. 39 (1991) 955
41. Shin D.H., Kim B.C., Park K.T., and Choo W.Y. Acta Mater. 48 (2000) 3245
42. Reed-Hill R.E. Physical Metallurgy Principles (1973), Van Nostrand, Princetown, NJ
43. Leslie W.C. The Physical Metallurgy of Steels (1982), McGraw-Hill, New York
44. Alden T.H. Metall. Trans. 7A (1976) 1057