The effect of mold temperature on castability of CP Ti and Ti-6Al-4V castings into phosphate bonded investment materials

Dental Materials

Volumn 22, Issue 12, 2006, Pages 1098-1102

  Oliveira, Pedro César Garcia ^a   Adabo, Gelson Luis ^a   Ribeiro, Ricardo Faria ^b   Rocha, Sicknan Soares ^a  

^a SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

Castability; Casting; Dental materials; Investment; Temperature; Titanium

Indexed keywords

CAMERAS; DENTAL MATERIALS; IMAGE ANALYSIS; INVESTMENT CASTING; MOLDS; TITANIUM ALLOYS;

CAST SEGMENTS; CASTABILITY; INVESTMENT MATERIALS; WAX PATTERNS;

TITANIUM CASTINGS;

BIOMEDICAL AND DENTAL MATERIALS; DENTAL ALLOY; PHOSPHATE; SILICON DIOXIDE; TITANIUM; TITANIUM ALLOY (TIAL6V4);

ANALYSIS OF VARIANCE; ARTICLE; COMPARATIVE STUDY; CORROSION; DENTAL CARE; DENTURE; ELASTICITY; FLOW KINETICS; HARDNESS; MATERIALS TESTING; TEMPERATURE;

ANALYSIS OF VARIANCE; CORROSION; DENTAL ALLOYS; DENTAL CASTING INVESTMENT; DENTAL CASTING TECHNIQUE; DENTAL STRESS ANALYSIS; ELASTICITY; HARDNESS; MATERIALS TESTING; PHOSPHATES; RHEOLOGY; SILICON DIOXIDE; TEMPERATURE; TITANIUM;

EID: 33750498036     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2005.09.004     Document Type: Article

References (30)

1. Jang K.S., Youn S.J., and Kim Y.S. Comparison of castability and surface roughness of commercially pure titanium and cobalt-chromium denture frameworks. J Prosthet Dent 86 (2001) 93-98
2. Wang R.R., and Boyle A.M. A simple method for inspection of porosity in titanium castings. J Prosthet Dent 70 (1993) 275-276
3. Syverud M., Okabe T., and Hero H. Casting of Ti-6Al-4V alloy compared with pure Ti in an Ar-arc casting machine. Eur J Oral Sci 103 (1995) 327-330
4. Wang T.J., Kobayashi E., Doi H., and Yoneyama T. Castability of Ti-6Al-7Nb alloy for dental casting. J Med Dent Sci 46 (1999) 13-19
5. Ohkubo C., Watanabe I., Ford J.P., Nakajima H., Hosoi T., and Okabe T. The machinability of cast titanium and Ti-6Al-4V. Biomaterials 21 (2000) 421-428
6. Taira M., Moser J.B., and Greener E.H. Studies of Ti alloys for dental casting. Dent Mater 5 (1989) 45-50
7. Zinelis S. Effect of pressure of helium, argon, krypton, and xenon on the porosity, microstructure, and mechanical properties of commercially pure titanium castings. J Prosthet Dent 84 (2000) 575-582
8. Ida K., Togaya T., Tsutsumi S., and Takeuchi M. Effect of magnesia investments in the dental casting of pure titanium or titanium alloys. Dent Mater J 1 (1982) 8-21
9. Papadopoulos T., Zinelis S., and Vardavoulias M. A metallurgical study of the contamination zone at the surface of dental Ti castings, due to the phosphate-bonded investment material: the protection efficacy of a ceramic coating. J Mater Sci 34 (1999) 3639-3646
10. Wang R.R., Welsch G.E., and Castro-Cedeno M. Interfacial reactions of cast titanium with mold materials. Int J Prosthodont 11 (1998) 33-43
11. 2 investment molds. J Dent Res 69 (1990) 1800-1805
12. Takahashi J., Zhang J.Z., and Okazaki M. Effect of casting methods on castability of pure titanium. Dent Mater J 12 (1993) 245-252
13. Oda Y., Kudoh Y., Kawada E., Yoshinari M., and Hasegawa K. Surface reaction between titanium castings and investments. Bull Tokyo Dent Coll 37 (1996) 129-136
14. Miyakawa O., Watanabe K., Okawa S., Nakano S., Kobayachi M., and Shiokawa N. Layered structure of cast titanium surface. Dent Mater J 8 (1989) 175-185
15. Hamanaka H., Doi H., Yoneyama T., and Okuno O. Dental casting of titanium and Ni-Ti alloys by a new casting machine. J Dent Res 68 (1989) 1529-1533
16. Takahashi J., Zhang J.Z., and Okazaki M. Castability and surface hardness of titanium cast obtained from experimental phosphate-bonded investment molds. Dent Mater J 12 (1993) 238-244
17. Luo X.P., Guo T.W., Ou Y.G., and Liu Q. Titanium casting into phosphate bonded investment with zirconite. Dent Mater 18 (2002) 512-515
18. Hero H., Syverud M., and Waarli M. Mold filling and porosity in castings of titanium. Dent Mater 9 (1993) 15-18
19. Chan D., Guillory V., Blackman R., and Chung K. The effect of sprue design on the roughness and porosity of titanium castings. J Prosthet Dent 78 (1997) 400-404
20. Mori T., Jean-Lous M., Yabugami M., and Togaya T. The effect of investment type on the fit of cast titanium crowns. Aust Dent J 39 (1994) 348-352
21. Hero H., and Waarli M. Effect of vaccum and supertemperature on mold filling during casting. Scand J Dent J 99 (1991) 55-59
22. Thomson D.V. A study of the effect of an increased mold temperature on the casting ability of some nonprecious alloys for porcelain veneers. J Prosthet Dent 48 (1982) 52-58
23. Hirano S., Tesk J.A., Hinman R.W., Argentar H., and Gregory T.M. Casting of dental alloys: mold and alloy temperature effects. Dent Mater 3 (1987) 307-314
24. Youdelis W.V., and Youdelis R.A. Silver-copper-germanium alloys. J Can Dent Assoc 47 (1981) 101-106
25. Syverud M., and Hero H. Mold filling of Ti casting using investments with different gas permeability. Dent Mater 11 (1995) 14-18
26. Watanabe K., Miyakawa O., Takada Y., Okuno O., and Okabe T. Casting behavior of titanium alloys in a centrifugal casting machine. Biomaterials 24 (2003) 1737-1743
27. Watanabe K., Okawa S., Miyakawa O., Nakano S., Shiokawa N., and Kobayashi M. Molten titanium flow in a mesh cavity by the flow visualization technique. Dent Mater J 10 (1991) 128-137
28. Watanabe I., Moldu M., Watanabe K., and Okabe T. Effect of casting method on castability of titanium and dental alloys. J Mater Sci Mater Med 11 (2000) 547-553
29. Lewis A.J. The effect of variations in mould temperature, metal temperature and mould size on the development of internal porosity in cast structures. Aust Dent J 22 (1977) 243-246
30. Hung C.C., Hou G.L., Tsai C.C., and Huang C.C. Pure titanium casting into zirconia-modified magnesia-based investment molds. Dent Mater 20 (2004) 846-851