Dynamic simulation pericardial bioprosthetic heart valve function

Journal of Biomechanical Engineering

Volumn 128, Issue 5, 2006, Pages 717-724

  Kim, Hyunggun ^a   Lu, Jia ^a   Sacks, Michael S ^b   Chandran, Krishnan B ^a,c  

^a IA United States   (United States)

^b University of Pittsburgh   (United States)

^c UNIVERSITY OF IOWA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CALCIFICATION (BIOCHEMISTRY); COMPUTER SIMULATION; DURABILITY; FINITE ELEMENT METHOD; STRESS CONCENTRATION;

LEAFLET MATERIAL SPECIFICATION; STRUCTURAL FAILURE; TISSUE VALVE CALCIFICATION;

HEART VALVE PROSTHESES;

ANISOTROPY; ARTICLE; BIOMECHANICS; BIOPROSTHESIS; BLOOD PRESSURE; CALCIFICATION; DEVICE REMOVAL; FINITE ELEMENT ANALYSIS; HEART VALVE; HEART VALVE PROSTHESIS; MECHANICAL STRESS; PERICARDIUM; PROSTHESIS FAILURE; SIMULATION;

ANIMALS; BLOOD PRESSURE; CATTLE; COMPUTER SIMULATION; ELASTICITY; EQUIPMENT FAILURE ANALYSIS; HEART VALVE PROSTHESIS; MODELS, CARDIOVASCULAR; PERICARDIUM; PROSTHESIS DESIGN; SHEAR STRENGTH; STRESS, MECHANICAL;

EID: 33750304262     PISSN: 01480731     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2244578     Document Type: Article

References (62)

1. Schoen, F. J., 2001, Pathology of Heart Valve Substitution with Mechanical and Tissue Prostheses, Churchill Livingstone, New York.
2. Schoen, F. J., and Levy, R. J., 1994, "Pathology of Substitute Heart Valves: New Concepts and Developments," J. Card. Surg., 9(2, Suppl.), pp. 222-227.
3. Ferrans, V. J., Hilbert, S. L., Fujita, S., Jones, M., and Roberts, W. C., 1991, Morphologic Abnormalities in Explanted Bioprosthetic Heart Valves, Saunders, Philadelphia.
4. Harasaki, H., Baker, M., and Zona, D., 1990, "Cross-Linking Agents, Degree of Crosslinkage and Calcifiability in Bioprosthetic Heart Valves," (Abstract) Trans. Soc. Biomater., 13, p. 25.
5. Pereira, C. A., Lee, J. M., and Haberer, S. A., 1990, "Effect of Alternative Crosslinking Methods on the Low Strain Rate Viscoelastic Properties of Bovine Pericardial Bioprosthetic Material," J. Biomed. Mater. Res., 24(3), pp. 345-361.
6. Petite, H., Rault, I., Huc, A., Menasche, P., and Herbage, D., 1990, "Use of the Acyl Azide Method for Cross-Linking Collagen-Rich Tissues such as Pericardium," J. Biomed. Mater. Res., 24(2), pp. 179-187.
7. Vasudev, S. C., and Chandy, T., 1997, "Effect of Alternative Crosslinking Techniques on the Enzymatic Degradation of Bovine Pericardia and their Calcification," J. Biomed. Mater. Res., 35(3), pp. 357-369.
8. Bengtsson, L. A., Phillips, R., and Haegerstrand, A. N., 1995, "In vitro Endothelialization of Photooxidatively Stabilized Xenogeneic Pericardium," Ann. Thorac. Surg., 60(2, Suppl.), pp. S365-S368.
9. Moore, M. A., Bohachevsky, I. K., Cheung, D. T., Boyan, B. D., Chen, W. M., Bickers, R. R., and McIlroy, B. K., 1994, "Stabilization of Pericardial Tissue by Dye-Mediated Photooxidation," J. Biomed. Mater. Res., 28(5), pp. 611-618.
10. Moore, M. A., Chen, W. M., Phillips, R. E., Bohachevsky, I. K., and McIlroy, B. K., 1996, "Shrinkage Temperature Versus Protein Extraction as a Measure of Stabilization of Photooxidized Tissue," J. Biomed. Mater. Res., 32(2), pp. 209-214.
11. Moore, M. A., McIlroy, B. K., and Phillips, R. E., Jr., 1997, "Nonaldehyde Sterilization of Biologic Tissue for Use in Implantable Medical Devices," ASAIO J., 43(1), pp. 23-30.
12. Schoen, F. J., 1998, "Pathologic Findings in Explanted Clinical Bioprosthetic Valves Fabricated From Photooxidized Bovine Pericardium," J. Heart Valve Dis., 7(2), pp. 174-179.
13. Sacks, M. S., and Schoen, F. J., 2002, "Collagen Fiber Disruption Occurs Independent of Calcification in Clinically Explanted Bioprosthetic Heart Valves," J. Biomed. Mater. Res., 62(3), pp. 359-371.
14. Catalogua, A., Clark, R. E., and Gould, P. L., 1977, "Stress Analysis of Aortic Valve Leaflets With Smoothed Geometrical Data," J. Biomech., 10(3), pp. 153-158.
15. Chandran, K. B., Kim, S. H., and Han, G., 1991, "Stress Distribution on the Cusps of a Polyurethane Trileaflet Heart Valve Prosthesis in the Closed Position," J. Biomech., 24(6), pp. 385-395.
16. Ghista, D. N., and Reul, H., 1977, "Optimal Prosthetic Aortic Leaflet Valve: Design Parametric and Longevity Analyses: Development of the Avcothane-51 Leaflet Valve Based on the Optimum Design Analysis," J. Biomech., 10(5-6), pp. 313-324.
17. Hamid, M. S., Sabbah, H. N., and Stein, P. D., 1986, "Influence of Stent Height Upon Stresses on the Cusps of Closed Bioprosthetic Valves," J. Biomech., 19(9), pp. 759-769.
18. Rousseau, E. P., van Steenhoven, A. A., and Janssen, J. D., 1988, "A Mechanical Analysis of the Closed Hancock Heart Valve Prosthesis," J. Biomech., 21(7), pp. 545-562.
19. Black, M. M., Howard, I. C., Huang, X., and Patterson, E. A., 1991, "A Three-Dimensional Analysis of a Bioprosthetic Heart Valve," J. Biomech., 24(9), pp. 793-801.
20. Howard, I. C., Patterson, E. A., and Yoxall, A., 2003, "On the Opening Mechanism of the Aortic Valve: Some Observations From Simulations," J. Med. Eng. Technol., 27(6), pp. 259-266.
21. Huang, X., Black, M. M., Howard, I. C., and Patterson, E. A., 1990, "A Two-Dimensional Finite Element Analysis of a Bioprosthetic Heart Valve," J. Biomech., 23(8), pp. 753-762.
22. Patterson, E. A., Howard, I. C., and Thornton, M. A., 1996, "A Comparative Study of Linear and Nonlinear Simulations of the Leaflets in a Bioprosthetic Heart Valve During the Cardiac Cycle," J. Med. Eng. Technol., 20(3), pp. 95-108.
23. Grande, K. J., Cochran, R. P., Reinhall, P. G., and Kunzelman, K. S., 1998, "Stress Variations in the Human Aortic Root and Valve: the Role of Anatomic Asymmetry," Ann. Biomed. Eng., 26(4), pp. 534-545.
24. Grande, K. J., Cochran, R. P., Reinhall, P. G., and Kunzelman, K. S., 1999, "Mechanisms of Aortic Valve Incompetence in Aging: A Finite Element Model," J. Heart Valve Dis., 8(2), pp. 149-156.
25. Grande, K. J., Cochran, R. P., Reinhall, P. G., and Kunzelman, K. S., 2000, "Mechanisms of Aortic Valve Incompetence: Finite Element Modeling of Aortic Root Dilatation," Ann. Thorac. Surg., 69(6), pp. 1851-1857.
26. Sun, W., Abad, A., and Sacks, M. S., 2005, "Simulated Bioprosthetic Heart Valve Deformation Under Quasi-static Loading," ASME J. Biomech. Eng., 127(6), pp. 905-914.
27. Burriesci, G., Howard, I. C., and Patterson, E. A., 1999, "Influence of Anisotropy on the Mechanical Behaviour of Bioprosthetic Heart Valves," J. Med. Eng. Technol., 23(6), pp. 203-215.
28. Sun, W., and Sacks, M. S., 2005, "Finite Element Implementation of a Generalized Fung-Elastic Constitutive Model for Planar Soft Tissues," Biomech. Model Mechanobiol., 4(2-3), pp. 190-199.
29. Sacks, M. S., and Sun, W., 2003, "Multiaxial Mechanical Behavior of Biological Materials," Annu. Rev. Biomed. Eng., 5, pp. 251-284.
30. Sun, W., Sacks, M. S., Sellaro, T. L., Slaughter, W. S., and Scott, M. J., 2003, "Biaxial Mechanical Response of Bioprosthetic Heart Valve Biomaterials to High In-plane Shear," ASME J. Biomech. Eng., 125(3), pp. 372-380.
31. Fung, Y. C., 1993, Biomechanics: Mechanical Properties of Living Tissues, Springer-Verlag, New York.
32. Sacks, M. S., 1999, "A Method for Planar Biaxial Mechanical Testing That Includes In-plane Shear," ASME J. Biomech. Eng., 121(5), pp. 551-555.
33. Sacks, M. S., 2000, "Biaxial Mechanical Evaluation of Planar Biological Materials," J. Elast., 61(1-3), pp. 199-246.
34. Hildebrand, F., 1980, Advanced Calculus for Applications, Prentice Hall, Englewood Cliffs, NJ.
35. Sun, W., Abad, A., and Sacks, M. S., 2005, "Simulated Bioprosthetic Heart Valve Deformation Under Quasi-Static Loading," ASME J. Biomech. Eng., 127(6), pp. 905-914.
36. Smith, D. B., Sacks, M. S., Pattany, P. M., and Schroeder, R., 1999, "Fatigue-Induced Changes in Bioprosthetic Heart Valve Three-Dimensional Geometry and the Relation to Tissue Damage," J. Heart Valve Dis., 8(1), pp. 25-33.
37. Sacks, M. S., 2001, "The Biomechanical Effects of Fatigue on the Porcine Bioprosthetic Heart Valve," J. Long Term Eff. Med. Implants, 11(3-4), pp. 231-247.
38. Naghdi, P. M., 1972, The Theory of Plates and Shells, Springer-Verlag, New York.
39. Simo, J. C., and Fox, D. D., 1989, "On a Stress Resultant Geometrically Exact Shell-Model. 1. Formulation and Optimal Parametrization, " Comput. Methods Appl. Mech. Eng., 72(3), pp. 267-304.
40. Simo, J. C., Fox, D. D., and Rifai, M. S., 1989, "On a Stress Resultant Geometrically Exact Shell-Model. 2. The Linear-Theory - Computational Aspects," Comput. Methods Appl. Mech. Eng., 73(1), pp. 53-92.
41. Sirao, J. C., Fox, D. D., and Rifai, M. S., 1990, "On a Stress Resultant Geometrically Exact Shell-Model. 3. Computational Aspects of the Nonlinear-Theory," Comput. Methods Appl. Mech. Eng., 79(1), pp. 21-70.
42. Brossollet, L. J., and Vito, R. P., 1996, "A New Approach to Mechanical Testing and Modeling of Biological Tissues, with Application to Blood Vessels," ASME J. Biomech. Eng., 118(4), pp. 433-439.
43. Rousseeuw, P. J., and Leroy, A. M., 1987. Robust Regression and Outlier Detection-Wiley Series in Probability and Mathematical Statistics. Applied Probability and Statistics, Wiley, New York.
44. Weiss, J. A., Maker, B. N., and Govindjee, S., 1996, "Finite Element Implementation of Incompressible, Transversely Isotropic Hyperelasticity," Comput. Methods Appl. Mech. Eng., 135(1-2), pp. 107-128.
45. Gnyaneshwar, R., Kumar, R. K., and Balakrishnan, K. R., 2002, "Dynamic Analysis of the Aortic Valve Using a Finite Element Model," Ann. Thorac. Surg., 73(4), pp. 1122-1129.
46. Zienkiewicz, O. C., and Taylor, R. L., 2000, The Finite Element Method, Butterworth-Heinemann, Oxford.
47. Taylor, R. L., 2003, FEAP User Manual: v7.5., Department of Civil and Environmental Engineering, University of California, Berkeley, Berkeley, CA.
48. Thubrikar, M. J., 1990, The Aortic Valve, CRC, Boca Raton, FL.
49. Kunzelman, K. S., Cochran, R. P., Chuong, C., Ring, W. S., Verrier, E. D., and Eberhart, R. D., 1993, "Finite Element Analysis of the Mitral Valve," J. Heart Valve Dis., 2(3), pp. 326-340.
50. Sripathi, V. C., Kumar, R. K., and Balakrishnan, K. R., 2004, "Further Insights into Normal Aortic Valve Function: Role of a Compliant Aortic Root on Leaflet Opening and Valve Orifice Area," Ann. Thorac. Surg., 77(3), pp. 844-851.
51. Lim, K. H., Yeo, J. H., and Duran, C. M., 2005, "Three-Dimensional Asymmetrical Modeling of the Mitral Valve: A Finite Element Study with Dynamic Boundaries," J. Heart Valve Dis., 14(3), pp. 386-392.
52. Thubrikar, M. J., Deck, J. D., Aouad, J., and Nolan, S. P., 1983, "Role of Mechanical Stress in Calcification of Aortic Bioprosthetic Valves," J. Thorac. Cardiovasc. Surg., 86(1), pp. 115-125.
53. Schoen, F. J., Levy, R. J., and Piehler, H. R., 1992, "Pathological Considerations in Replacement Cardiac Valves," Cardiovasc. Pathol., 1(1), pp. 29-52.
54. Deiwick, M., Glasmacher, B., Baba, H. A., Roeder, N., Reul, H., von Bally, G., and Scheld, H. H., 1998, "In vitro Testing of Bioprostheses: Influence of Mechanical Stresses and Lipids on Calcification," Ann. Thorac. Surg., 66(6, Suppl.), pp. S206-S211.
55. Driessen, N. J., Boerboom, R. A., Huyghe, J. M., Bouten, C. V., and Baaijens, F. P., 2003, "Computational Analyses of Mechanically Induced Collagen Fiber Remodeling in the Aortic Heart Valve," ASME J. Biomech. Eng., 125(4), pp. 549-557.
56. Kunzelman, K. S., Quick, D. W., and Cochran, R. P., 1998, "Altered Collagen Concentration in Mitral Valve Leaflets: Biochemical and Finite Element Analysis," Ann. Thorac. Surg., 66(6, Suppl.), pp. S198-S205.
57. Thornton, M. A., Howard, I. C., and Patterson, E. A., 1997, "Three-Dimensional Stress Analysis of Polypropylene Leaflets for Prosthetic Heart Valves," Med. Eng. Phys., 19(6), pp. 588-597.
58. De Hart, J., Baaijens, F. P., Peters, G. W., and Schreurs, P. J., 2003, "A Computational Fluid-Structure Interaction Analysis of a Fiber-Reinforced Stentless Aortic Valve," J. Biomech., 36(5), pp. 699-712.
59. De Hart, J., Peters, G. W., Schreurs, P. J., and Baaijens, F. P., 2003, "A Three-Dimensional Computational Analysis of Fluid-Structure Interaction in the Aortic Valve," J. Biomech., 36(1), pp. 103-112.
60. Sacks, M. S., 2003, "Incorporation of Experimentally-Derived Fiber Orientation into a Structural Constitutive Model for Planar Collagenous Tissues," ASME J. Biomech. Eng., 125(2), pp. 280-287.
61. Sacks, M. S., Smith, D. B., and Hiester, E. D., 1997, "A Small Angle Light Scattering Device for Planar Connective Tissue Microstructural Analysis," Ann. Biomed. Eng., 25(4), pp. 678-689.
62. Hole, J. W., 1996, Hole's Human Anatomy and Physiology, Brown, Dubuque, IA.