Numerical analysis of friction stir welding process

Journal of Materials Engineering and Performance

Volumn 15, Issue 5, 2006, Pages 505-518

  Uyyuru, R K ^a   Kallas, Satish V ^a  

^a INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

FE simulation; Friction stir welding (FSW); Numerical analysis

Indexed keywords

COMPUTER SIMULATION; FRICTION; MELTING; NUMERICAL ANALYSIS; THERMOMECHANICAL TREATMENT; WELDING CODES;

FE SIMULATION; FINITE ELEMENT (FE) CODES; FRICTION STIR WELDING (FSW); GROSS MELTING;

WELDING;

EID: 33750218236     PISSN: 10599495     EISSN: None     Source Type: Journal    
DOI: 10.1361/105994906X136070     Document Type: Article

References (63)

1. K. Kumar and V.S. Kailas, "Friction Stir Welding," presented at International Congress on Sheet Metal Forming Technology for Global Competitiveness (New Delhi, India), 2004
2. K. Kumar and V.S. Kailas, "Influence of Tool Geometry on Defect Formation, Microstructure and Mechanical Properties of a Friction Stir Welded Aluminium Alloy," presented at the Second International Conference on Advances in Production and Processing of Aluminium APPA 2005 Proceedings (Bahrain), December 2005, University of Bahrain, p III-8-1-12
3. K. Kumar and V.S. Kailas, "On the Role of Axial Load and the interface Position on the Strength of a Friction Stir Welded Aluminium Alloy," presented at the second international conference on Advances in Production and Processing of Aluminium APPA 2005 proceedings (Bahrain), December 2005, University of Bahrain, p III-9-1-11
4. G. Campbell and T. Stotler, Friction Stir Welding of Armor Grade Aluminum Plate, Weld. J., 1999, 78(12), p 45-48
5. Y.J. Chao and X. Qi, Thermal and Thermo-Mechanical Modeling of Friction Stir Welding of Aluminum Alloy 6061-T6, J. Mater. Manufact. Sci., 1999, 7(2), p 215-233
6. K. Colligan, Material Flow Behavior During Friction Stir Welding of Aluminum, Weld. J., 1999, 78(7), p 229-237
7. P. Dong, F. Lu, J.K. Hong, and Z. Cao, "Analysis of Weld Formation Process in Friction Stir Welding," presented at the 1st International Symposium on Friction Stir Welding (Thousand Oaks, CA), June 1999
8. O.V. Flores, C. Kennedy, L.E. Murr, D. Brown, S. Pappu, B.M. Nowak, and J.C. McLure, Microstructural Issues in a Friction Stir Welded Aluminum Alloy, Scripta Mater., 1998, 38(5), p 703-708
9. Ø. Frigaard, Ø. Grong, B. Bjorneklett, and O.T. Midling, "Modelling of the Thermal and Microstructural Fields During Friction Stir Welding of Aluminium Alloys," presented at the 1st International Symposium on Friction Stir Welding (Thousand Oaks, CA), June 1999
10. J.E. Gould and Z. Feng, Heat Flow Model for Friction Stir Welding of Aluminum Alloys, J. Mater. Manufact. Sci., 1999, 7(2), p 185-194
11. G. Liu, L.E. Murr, C.S. Niou, J.C. McLure, and F.R. Vega, Microstructural Aspects of the Friction Stir Welding of 6061-T6 Aluminum, Scripta Mater., 1997, 37(3), p 355-361
12. L.E. Murr, G. Liu, and J.C. McLure, Dynamic Recrystallization in Friction-Stir Welding of Aluminum Alloy 1100, J. Mater. Sci. Lett., 1997, 16, p 1801-1803
13. A.P. Reynolds and W.D. Lockwood, "Digital image Correlation for Determination of Weld and Base Metal Constitutive Behavior," presented at the 1st International Symposium on Friction Stir Welding (Thousand Oaks, CA), June 1999
14. A.P. Reynolds, T.U. Seidel, and M. Simonsen, "Visualization of Material Flow in an Autogenous Friction Stir Weld," presented at the 1st International Symposium on Friction Stir Welding (Thousand Oaks, CA), June 1999
15. C.G. Rhodes, M.W. Mahoney, W.H. Bingel, R.A. Spurling, and C.C. Bampton, Effects of Friction Stir Welding on Microstructure of 7075 Aluminum, Scripta Mater., 1997, 36(1), p 69-75
16. W. Tang, X. Guo, J.C. McClure, L.E. Murr, and J.Q. Sun, Heat Input and Temperature Distribution in Friction Stir Welding, J. Mater. Manufact. Sci., 1999, 7(2), p 163-172
17. M.Z.H. Khandkar and J.A. Khan, Thermal Modeling of Overlap Friction Stir Welding for Al-Alloys, J. Mater. Process. Manuf. Sci., 2001, 10, p 91-105
18. R.W. Fonda and S.G. Lambrakos, Analysis of Friction Stir Welds Using an Inverse Problem Approach, Sci. Technol. Welding Joining, 2002, 7(3), p 177-181
19. R.W. Fonda, J.F. Bingert, and K.J. Colligan, Development of Grain Structure During Friction Stir Welding, Scripta Mater., 2004, 51, p 243-248
20. M.G. Dawes, S.A. Karger, T.L. Dickerson, and J. Przydatek, "Strength and Fracture Toughness of Friction Stir Welds in Aluminum Alloys," presented at the 2nd International Symposium on Friction Stir Welding (Gothenburg, Sweden), June 2000
21. L. Cederqvist and A.P. Reynolds, "Properties of Friction Stir Welded Aluminum Lap Joints," presented at the 2nd International Symposium on Friction Stir Welding (Gothenburg, Sweden), June 2000
22. L. Magnusson and L. Källman, "Mechanical Properties of Friction Stir Welds in Thin Sheet of Aluminium 2024, 6013 and 7475," presented at the 2nd International Symposium on Friction Stir Welding (Gothenburg, Sweden), June 2000
23. D.J. Kinchen, Z. Li, and G.P. Adams, "Mechanical Properties of Friction Stir Welds in Al-Li 2195-T8," presented at the 1st International Symposium on Friction Stir Welding (Thousand Oaks, CA), June 1999
24. T. Hashimoto, S. Jyogan, K. Nakata, Y.G. Kirn, and M. Ushio, "FSW Joints of High Strength Aluminum Alloy," presented at the 1st International Symposium on Friction Stir Welding (Thousand Oaks, CA), June 1999
25. J.C. Bassett and S.S. Birley, "Friction Stir Welding of Aluminium Armour," presented at the 2nd International Symposium on Friction Stir Welding (Gothenburg, Sweden), June 2000
26. www.mts.com/aesd/friction_stir.htm
27. M. Skinner and R.L. Edwards, Improvements to the FSW Process Using the Self-Reacting Technology, Mater. Sci. Forum, 2003, 426-432, p 2849-2854
28. C.M. Chen and R. Kovacevic, Prediction of Evolutional Stress in Friction Stir Welding, Proceedings of Materials Science and Technology 2003 Meeting, 2003, Chicago, TMS, p 357-368
29. C.M. Chen and R. Kovacevic, Finite Element Modeling of Friction Stir Welding: Thermal and Thermo-Mechanical Analysis, Int. J. Machine Tools Manufact., 2003, 43, p 1319-1326
30. M. Song and R. Kovacevic, Numerical and Experimental Study of the Heat Transfer Process in Friction Stir Welding, J. Eng. Manufact., B, 2003, 217, p 73-85
31. M. Song, R. Kovacevic, J. Ouyang, and M. Valant, "A Detailed Three-Dimensional Transient Heat Transfer Model for Friction Stir Welding," presented at ASM Proceedings of the International Conference: Trends in Welding Research, ASM International, 2002, p 212-217
32. M. Song and R. Kovacevic, Thermal Modeling of Friction Stir Welding in a Moving Coordinate System and Its Validation, Int. J. Machine Tools Manufact., 2003, 43, p 605-615
33. Y. Cao and X. Qi, Thermal and Thermo-Mechanical Modeling of Friction Stir Welding of Aluminum Alloy 6001-T6, J. Mater. Proc. Manufact. Sci., 1998, 7(10), p 215-233
34. G. Oertelt, S.S. Babu, S.A. David, and E.A. Kenik, Effect of Thermal Cycling on Friction Stir Welds of 2195 Aluminum Alloy, Weld. Res., 2001, 80(3), (suppl), p 71-79
35. H. Schmidt, J. Hattel, and J. Wert, An Analytical Model for the Heat Generation in Friction Stir Welding, Model. Simul. Mater. Sci. Eng., 2004, 12, p 143-157
36. M.Z.H. Khandkar and J.A. Khan, Thermal Modeling of Overlap Friction Stir Welding for Al-Alloys, J. Mater. Proc. Manuf. Sci., 2001, 10, p 91-105
37. M.Z.H. Khandkar, J.A. Khan, and A.P. Reynolds, "A Thermal Model of the Friction Stir Welding Process," presented at proceedings of the 6th International Conference on Trends in Welding Research, ASM International, 2002, p 218-223
38. M.Z.H. Khandkar and J.A. Khan, Predicting Residual Thermal Stresses in Friction Stir Welding, American Society of Mechanical Engineers, Heat Transfer Division, (Publication), HTD, 2003, 374(3), p 355-360
39. A. Steuwer, M. Peel, P.J. Withers, T. Dickerson, Q. Shi, and H.R. Shercliff, Measurement and Prediction of Residual Stresses in Aluminium Friction Stir Welds, J. Neutron Res., 2003, 11(4), p 267-272
40. D. Lawrjaniec, A. Abisror, C. Decker, M. Kocak, and J. Dos Santos, Numerical Simulation of Friction Stir Welding, Mater. Sci. Forum, 2003, 426-432, p 2993-2998
41. L. Tianzhong, T.U. Seidel, T. Wei, and A.P. Reynolds, "A Friction Stir Welding Model Using Computational Fluid Dynamics," presented at Hot Deformation of Aluminum Alloys III, 2003 TMS Annual Meeting, The Materials Society, 2003, p 299-312
42. P. Heutier, M.J. Jones, C. Desrayaud, J.H. Driver, and F. Montheillet, Thermomechanical Conditions and Resultant Microstructures in Friction Stir Welded 2024 Aluminium, Mater. Sci. Forum, 2003, 426-432, p 2927-2932
43. A.P. Reynolds, K. Linder, W. Tang, and T.U. Seidel, Weld Efficiency and Defect Formation: Correlation Between Experiment and Simple Models, ASM Proceedings of the International Conference: Trends in Welding Research, ASM International, 2002, p 297-301
44. H.N. Schmidt, J. Hattel, and J.R. Wert, Modeling of the Contact Condition at the Tool/Matrix Interface In Friction Stir Welding, 7th International Seminar on Numerical Analysis Of Weldability, Mathematical Modeling of Weld Phenomena, Vol 7, H. Cerjak and H.K.D.H. Bhadeshia, Ed., TMS, p 12
45. A. Askari, S. Silling, B. London, and M. Mahoney, Modeling and Analysis of Friction Stir Welding Processes, Proceedings of Symposium on Friction Stir Welding and Processing, November 4-8, 2001 (Indianapolis, IN), TMS, p 43-54
46. P. Ulysse. Three-Dimensional Modeling of the Friction StirWelding Process. Int. J. Machine Tools Manufact., 2002. 42, p 1549-1557
47. X.K. Zhu and Y.J. Chao. Numerical Simulation of Transient Temperature and Residual Stresses in Friction Stir Welding of 304L Steel. J. Mater. Process. Technol. 2004, 146, p 263-272
48. G. Aramayo, B. Radhakrishanan, S.A. David. G. Sarma, and S.S. Babu. "Modeling of Friction Stir Welding Process for Fusion Energy Applications." Oak Ridge National Laboratory
49. W.D. Lockwood, B. Tomaz, and A.P. Reynolds, Mechanical Response of Friction Stir Welded AA2024: Experiment and Modeling, Mater. Sci. Eng., A. 2002. 323, p 348-353
50. W.D. Lockwood and A.P. Reynolds. Simulation of the Global Response of a Friction Stir Weld Using Local Constitutive Behavior, Mater. Sci. Eng., A. 2003, 339, p 35-42
51. G. Buffa and L. Fratini, Friction Stir Welding of AA6082-T6 Sheets: Numerical Analysis and Experimental Tests, Proceedings of NUMIFORM 2004. Materials Processing and Design: Modelling, Simulation, and Applications, p 1224-1229
52. L. Fratini and G. Buffa. CDRX Modelling in Friction Stir Welding of Aluminium Alloys. Int. J. Machine Tools Manufact., 2005, 45, p 1188-1194
53. J.H. Ouyang and R. Kovacevic, Material Flow and Microstructure in the Friction Stir Butt Welds of the Same and Dissimilar Aluminium Alloys, J. Mater. Eng. Perf., 2002, 11, p 51-63
54. M. Guerra, C. Schmidt. J.C. McClure, L.E. Murr, and A.C. Nunes, Flow Patterns During Friction Stir Welding. Muter. Charract., 2003. 49, p 95-101
55. L.E. Murr, R.D. Flores, O.V. Flores. J.C. McClure, G. Liu, and D. Brown, Friction Stir Welding: Micro-Structural Characterization, Mater. Res. Innov., 1998, 1, p 211-223
56. L.E. Murr, Y. Li. R.D. Flores. E.A. Trillo, and J.C. McClure. Intercalation Vortices and Related Micro-Structural Features I the Friction Stir Welding of Dissimilar Metals, Mater. Res. Innov., 1998, 2, p 150-163
57. Y. Li, L.E. Murr, and J.C. McClure. Flow Visualization and Residual Microstructures Associated with the Friction Stir Welding of 2024 Aluminium to 6061 Aluminium, Mater. Sci. Eng., A. 1999, 271, p 213-223
58. Y. Li, L.E. Murr, and J.C. McClure, Solid-State Flow Visualization in the Friction Stir Welding of 2024 Al to 6061 Al. Scripta Mater., 1999. 40, p 1041-1046
59. A.P. Reynolds, Visualization of Material Flow in Autogeneous Friction Stir Welds, Sci. Technol. Weld. Juin., 2000, 5, p 120-124
60. K. Colligan. Material Flow Behavior During Friction Stir Welding of Aluminium, Weld. J., 1999, 78(7), p 229-237
61. K.N. Krishnan, On the Formation of Onion Rings in Friction Stir Welds, Mater. Sci. Eng., A. 2002, 327, p 246-251
62. J.A. William, Modeling Friction Stir Joining as a Metal Working Process. TMS Annual Meeting 2003. The Materials Society, p 313-327
63. www.deform.com.