Dynamic thermal modeling of power transformers: Further development - Part II

IEEE Transactions on Power Delivery

Volumn 21, Issue 4, 2006, Pages 1971-1980

  Susa, Dejan ^a   Lehtonen, Matti ^b  

^a MONASH UNIVERSITY   (Australia)

^b AALTO UNIVERSITY   (Finland)

Author keywords

Bottom oil temperature; Hot spot temperature; Power transformer

Indexed keywords

CAPACITANCE MEASUREMENT; HEAT RESISTANCE; HEAT TRANSFER; MATHEMATICAL MODELS; POWER SUPPLY CIRCUITS;

LUMP CAPACITANCE METHOD; NONLINEAR THERMAL RESISTANCES; POWER TRANSFORMER; THERMAL-ELECTRICAL ANALOGY;

ELECTRIC TRANSFORMERS;

EID: 33750110700     PISSN: 08858977     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPWRD.2005.864068     Document Type: Article

References (42)

1. "Loading guide for oil-immersed power transformers," IEC 354-1991.
2. "Direct measurements of the hot-spot temperature of transformers" 1990, CIGRE WG 12-09.
3. W. Lampe, L. Pettersson, C. Ovren, and B. Wahlström, "Hot-spot measurements in power transformers," in Cigre, Rep. 12-02, Proc. Int. Conf. Large High Voltage Electric Systems, Aug. 29-Sep. 6, 1984.
4. H. Nordman, E. Hironniemi, and A. J. Pesonen, "Determination of hot-spot temperature rise at rated load and at overload," CIGRE Paper 12-103, 1990.
5. H. Nordman and M. Lahtinen, "Thermal overload tests on a 400-MVA power transformer with a special 2.5-p.u. short time loading capability," IEEE Trans. Power Del., vol. 18, no. 1, pp. 107-112, Jan. 2003.
6. H. Nordman, N. Rafsback, and D. Susa, "Temperature responses to step changes in the load current of power transformers," IEEE Trans. Power Del., vol. 18, no. 4, pp. 1110-1117, Oct. 2003.
7. N. T. Räfsbäck, "Short-time emergency overloading of power transformers," Bachelor thesis, Power transformer company, ABB, Vaasa, Finland, 2001.
8. M. P. Saravolac, "The use of optic fibers for temperature monitoring in power transformers," in Proc. Inst. Elect. Eng. Colloq. Condition Monitoring and Remanent Life Assessment in Power Transformers, 1994, pp. 7/1-7/3.
9. M. V. Thaden, S. P. Mehta, S. C. Tuli, and R. L. Grubb, "Temperature rise tests on a forced-oil-air cooled (FOA) (OFAF) core-form transformer, including loading beyond nameplate," IEEE Trans. Power Del., vol. 10, no. 2, pp. 913-923, Apr. 1995.
10. IEEE Std. C57.91-1995 IEEE Guide for Loading Mineral-Oil-Immersed Transformers.
11. J. Aubin and Y. Langhame, "Effect of oil viscosity on transformer loading capability at low ambient temperatures," IEEE Trans. Power Del., vol. 7, no. 2, pp. 516-524, Apr. 1992.
12. L. W. Pierce, "An investigation of the thermal performance of an oil filled transformer winding," IEEE Trans. Power Del., vol. 7, no. 3, pp. 1347-1358, Jul. 1992.
13. L. W. Pierce, "Predicting liquid filled transformer loading capability," IEEE Trans. Ind. Appl., vol. 30, no. 1, pp. 170-178, Jan./Feb. 1994.
14. Z. Radakovic and K. Feser, "A new method for the calculation of the hot-spot temperature in power transformers with ONAN cooling," IEEE Trans. Power Del., vol. 18, no. 4, pp. 1284-1292, Oct. 2003.
15. F. P. Incropera and D. P. DeWitt, Fundamentals of Heat and Mass Transfer, 4th ed. New York: Wiley, 1996, p. 886.
16. W. J. King, "The basic laws and data of heat transmission," Mechan. Eng., p. 191, Mar.-Aug. 1932.
17. R. W. Chester, "Free and forced convection of heat in gases and liquides-II," Phys. Rev., vol. 21, p. 1288, Apr. 1923.
18. R. W. Chester, "Free and forced convection of heat in gases and liquides-II," AIEE Trans., p. 131, Feb. 1924.
19. J. Aubin, R. Bergeron, and R. Morin, "Distribution transformer overloading capability under cold-load pickup conditions," IEEE Trans. Power Del., vol. 5, no. 4, pp. 1883-1891, Oct. 1990.
20. L. F. Blume, A. Boyajian, G. Camilli, T. C. Lennox, S. Minneci, and V. M. Montsinger, Transformer Engineering, 1st ed. New York: Wiley, 1938.
21. L. F. Blume, Transformer Engineering, 2nd ed. New York: Wiley, 1951.
22. R. E. Doherty and E. S. Carter, "Effect of altitude on temperature rise," AIEE Trans., vol. 43, Jun. 1924.
23. K. Eckholz, W. Knorr, and M. Schäfer, "New developments in transformer cooling calculations," in Cigre, Rep. 12-09, Proc. Int. Conf. Large High Voltage Electric Systems, Aug. 29-Sep. 6, 2004.
24. "Heat-run test procedure for power transformers" 1990, CIGRE WG 12-09.
25. R. L. Grubb, M. Hudis, and A. R. Traut, "A transformer thermal duct study of various insulating fluids," IEEE Trans. Power App. Syst, vol. PAS-100, no. 2, pp. 466-473, Feb. 1981.
26. K. Karsai, D. Kerenyi, and L. Kiss, Large Power Transformers. New York: Elsevier, 1987, p. 607.
27. V. M. Montsinger, "Effect of barometric pressure on temperature rise of self-cooled stationary induction apparatus," AIEE Trans., 1916.
28. V. M. Montsinger, "Cooling of transformer windings after shut-down," AIEE Trans., vol. 36, p. 711, 1917.
29. V. M. Montsinger and W. H. Cooney, "Temperature rise of stationary electrical apparaturs as influenced by radiation, convection, and altitude," AIEE Trans., vol. 43, p. 803, 1924.
30. V. M. Montsinger and L. Wetherill, "Effect of color of tank on the on temperature self-cooled transformers under service conditions," AIEE Trans., vol. 49, p. 41, 1930.
31. V. M. Montsinger, "Loading transformer by temperature," AIEE Trans., vol. 49, p. 776, 1930.
32. V. M. Montsinger and W. M. Dann, "Overloading of power transformers," Elect. Eng., Oct. 1934.
33. V. M. Montsinger and M. P. Ketchum, "Emergency overloading of air-cooled transformers by hot-spot temperature," Supplemental Issue Elec. Eng, Dec. 1942.
34. E. G. Tenyenhuis, R. S. Girgis, G. F. Mechler, and G. Zhou, "Calculation of core hot-spot temperature in power and distribution transformers," IEEE Trans. Power Del., vol. 17, no. 4, pp. 991-995, Oct. 2002.
35. D. Susa, M. Lehtonen, and H. Nordman, "Dynamic thermal modeling of distribution transformers," IEEE Trans. Power Del., vol. 20, no. 3, pp. 1919-1929, Jul. 2005.
36. D. Susa, J. Palola, M. Lehtonen, and M. Hyvarinen, "Temperature rises in an OFAF transformer at OFAN cooling mode in service," IEEE Trans. Power Del., vol. 20, no. 4, pp. 2517-2525, Oct. 2005.
37. D. Susa, M. Lehtonen, and H. Nordman, "Dynamic thermal modeling of power transformers," IEEE Trans. Power Del., vol. 20, no. 1, pp. 197-204, Jan. 2005.
38. G. Swift, T. S. Molinski, R. Bray, and R. Menzies, "A fundamental approach to transformer thermal modeling-II. Field verification," IEEE Trans. Power Del., vol. 16, no. 2, pp. 176-180, Apr. 2001.
39. G. Swift, T. S. Molinski, and W. Lehn, "A fundamental approach to transformer thermal modeling-I. Theory and equivalent circuit," IEEE Trans. Power Del., vol. 16, no. 2, pp. 171-175, Apr. 2001.
40. W. H. Tang, Q. H. Wu, and Z. J. Richardson, "Equivalent heat circuit based power transformer thermal model," Proc. Inst. Elect. Eng., Elect. Power Appl., vol. 149, no. 2, pp. 87-92, Mar. 2002.
41. W. H. Tang, Q. H. Wu, and Z. J. Richardson, "A simplified transformer thermal model based on thermal-electric analogy," IEEE Trans. Power Del., vol. 19, no. 3, pp. 1112-1119, Jul. 2004.
42. D. Susa and M. Lehtonen, "Dynamic thermal modeling of power transformers-further development: Part I," IEEE Trans. Power Del., vol. 21, no. 4, Oct. 2006.