Tensile strength and corrosion resistance of brazed and laser-welded cobalt-chromium alloy joints

Journal of Prosthetic Dentistry

Volumn 96, Issue 4, 2006, Pages 273-282

  Zupancic, Rok ^a   Legat, Andraz ^b   Funduk, Nenad ^a  

^a UNIVERSITY OF LJUBLJANA   (Slovenia)

^b Department of Civil Engineering

Author keywords

[No Author keywords available]

Indexed keywords

CHROMIUM DERIVATIVE; COBALT;

ARTICLE; COMPARATIVE STUDY; CORROSION; DENTAL CARE; DENTAL SURGERY; DENTURE; ELECTROCHEMISTRY; IMPEDANCE; LASER; METALLURGY; SCANNING ELECTRON MICROSCOPY; TENSILE STRENGTH; WELDING;

CHROMIUM ALLOYS; COBALT; CORROSION; DENTAL SOLDERING; DENTAL STRESS ANALYSIS; DENTURE DESIGN; DENTURE, PARTIAL; ELECTRIC IMPEDANCE; ELECTROCHEMISTRY; LASERS; METALLURGY; MICROSCOPY, ELECTRON, SCANNING; TENSILE STRENGTH; WELDING;

EID: 33749986040     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.prosdent.2006.08.006     Document Type: Article

References (38)

1. Wataha J.C. Alloys for prosthodontic restorations. J Prosthet Dent 87 (2002) 351-363
2. Wulfes H. Precision milling and partial denture constructions (2003), Academia Dental, Bremen p. 108-19, 259-60
3. Craig R.G., Powers J.M., and Wataha J.C. Dental materials: properties and manipulation. 8th ed. (2004), Mosby, St. Louis p. 234-50
4. Henriques G.E., Consani S., Rollo J.M., and Andrade e Silva F. Soldering and remelting influence on fatigue strength of cobalt-chromium alloys. J Prosthet Dent 78 (1997) 146-152
5. Angelini E., Pezzoli M., Rosalbino F., and Zucchi F. Influence of corrosion on brazed joints' strength. J Dent 19 (1991) 56-61
6. Luthy H., Marinello C.P., Reclaru L., and Sharer P. Corrosion considerations in the brazing repair of cobalt based partial dentures. J Prosthet Dent 75 (1996) 515-524
7. NaBadalung D.P., and Nicholls J.I. Laser welding of a cobalt-chromium removable partial denture alloy. J Prosthet Dent 79 (1998) 285-290
8. Dominici J.T., Sobczak K.P., and Mitchell R.J. A comparison of infrared- and torch-soldering of Au-Pd and Co-Cr metal-ceramic alloys using a high-fusing solder. J Prosthodont 4 (1995) 101-110
9. Wiskott H.W., Macheret F., Bussy F., and Besler U.C. Mechanical and elemental characterization of solder joints and welds using a gold-palladium alloy. J Prosthet Dent 77 (1997) 607-616
10. Dong H., Nagamatsu Y., Chen K.K., Tajima K., Kakigawa H., and Shi S. Corrosion behavior of dental alloys in various types of electrolyzed water. Dent Mater J 22 (2003) 482-493
11. Landolt D. Introduction to surface reactions: electrochemical basis of corrosion. In: Marcus P. (Ed). Corrosion mechanics in theory and practice. 2nd ed. Vol 17 (2002), Marcel Dekker, New York 1-19
12. Kelly R.G., Shoesmith D.W., and Buchheit R.G. Electrochemical techniques in corrosion science and engineering (2003), Marcel Dekker, New York p. 5-150, 205-57
13. McDonald M.M. Corrosion of braze joints. Metals Handbook. 9th ed, Vol 13 (1987), ASM International, Metals Park (OH) 876-886
14. Shigeto N., Yanagihara T., Hamada T., and Budtz-Jorgensen E. Corrosion properties of soldered joints. Part 1. Electrochemical action of dental solder and dental nickel-chromuim alloy. J Prosthet Dent 62 (1989) 512-515
15. Cortada M., Giner L.L., Costa S., Gil F.J., Rodriguez D., and Planell J.A. Galvanic corrosion behavior of titanium implants coupled to dental alloys. J Mater Sci Mater Med 11 (2000) 287-293
16. Al-Ali S., Oshida Y., Andres C.J., Barco M.T., Brown D.T., Hovijitra S., et al. Effects of coupling methods on galvanic corrosion behavior of commercially pure titanium with dental precious alloys. Biomed Mat Eng 15 (2005) 307-316
17. Wataha J.C. Biocompatibility of dental casting alloys. J Prosthet Dent 87 (2000) 223-234
18. Geurtsen W. Biocompatibility of dental casting alloys. Crit Rev Oral Biol Med 13 (2002) 71-84
19. Martin M.D., Broughton S., and Drangsholt M. Oral lichen planus and dental materials: a case-control study. Contact Dermatitis 48 (2003) 331-336
20. Mansfeld F., Shih H., Greene H., and Tsai C.H. Analysis of EIS data for common corrosion processes. In: Scully J.R., Silverman D.C., and Kendig M.W. (Eds). Electrochemical impedance: analysis and interpretation (1993), American Society for Testing and Materials, Philadelphia 37-53
21. Legat A., and Dolecek V. Chaotic analysis of electrochemical noise measured on stainless steel. J Electrochem Soc 142 (1995) 1851-1858
22. Legat A. Influence of electrolyte movement on measured electrochemical noise. Corrosion 56 (2000) 1086-1092
23. Sun D., Monaghan P., Brantley W.A., and Johnston W.M. Electrochemical impedance spectroscopy study of high-palladium dental alloys. Part I: behavior at open-circuit potential. J Mater Sci Mater Med 13 (2002) 435-442
24. Cai Z., Vermilyea S.G., and Brantley W.A. In vitro corrosion resistance of high-palladium dental casting alloys. Dent Mater 15 (1999) 202-210
25. Mueller H.J., and Hirthe R.W. Electrochemical characterization and immersion corrosion of a consolidated silver dental biomaterial. Biomaterials 22 (2001) 2635-2646
26. Mueller H.J. In vitro tarnish and corrosion of a consolidated silver material for direct filling applications. Dent Mater 17 (2001) 60-70
27. Acciari H.A., Guastaldi A.C., and Brett C.M.A. Corrosion of the component phases presents in high copper dental amalgams. Application of electrochemical impedance spectroscopy and electrochemical noise analysis. Corr Sci 47 (2005) 547-635
28. Duffo G.S., and Quezada Castillo E. Development of an artificial saliva solution for studying the corrosion behavior of dental alloys. Corrosion 60 (2004) 594-602
29. Demirel F., Saygili G., and Sahmali S. Corrosion susceptibility of titanium covered by dental cements. J Oral Rehabil 30 (2003) 1162-1167
30. Sjogren G., Andersson M., and Bergman M. Laser welding of titanium in dentistry. Acta Odontol Scand 46 (1988) 245-253
31. Chai T., and Chou C.K. Mechanical properties of laser-welded cast titanium joints under different conditions. J Prosthet Dent 79 (1998) 477-483
32. Liu J., Watanabe I., Yoshida K., and Atsua M. Joint strength of laser-welded titanium. Dent Mater 18 (2002) 143-148
33. Wiskott H.W., Doumas T., Scherrer S.S., Susz C., and Besler U.C. Microstructures of brazings and welds using grade 2 commercially pure titanium. Int J Prosthodont 14 (2001) 40-47
34. Jemt T., Henry P., Linden B., Naert I., Weber H., and Bergstrom C. A comparison of laser-welded titanium and conventional cast frameworks supported by implants in the partially edentulous jaw: a 3-year prospective multicenter study. Int J Prosthodont 13 (2000) 282-288
35. Bertrand C., Le Petitcorps Y., Albingre L., and Dupuis V. The laser welding technique applied to the nonprecious dental alloys procedure and results. Br Dent J 190 (2001) 255-257
36. Bertrand C., le Petitcorps Y., Albingre L., and Dupuis V. Optimization of operator and physical parameters for laser welding of dental materials. Br Dent J 196 (2004) 413-418
37. European Committee for Standardization. Standard EN 10002 - 1: Metallic materials; tensile testing; part 1: method of test. Brussels (1996)
38. Fusayama T., Katayori T., and Nomoto S. Corrosion of gold and amalgam placed in contact with each other. J Dent Res 42 (1963) 1183-1197