Controlled undercooling of liquid iron in contact with Al 2O 3 Substrates under varying oxygen partial pressures

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Volumn 37, Issue 5, 2006, Pages 811-821

  Valdez, Martin E ^a,b   Uranga, Pello ^c   Fuchigami, Katsuhiro ^d   Shibata, H ^e   Cramb, Alan W ^f,g  

^a CARNEGIE MELLON UNIVERSITY   (United States)

^b Tenaris Group   (Argentina)

^c CEIT   (Spain)

^d NIPPON STEEL CORPORATION   (Japan)

^e TOHOKU UNIVERSITY   (Japan)

^f CARNEGIE MELLON UNIVERSITY   (United States)

^g RENSSELAER POLYTECHNIC INSTITUTE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DROPLET RECALESCENCE; LIQUID IRON; NUCLEANTS; OXYGEN PARTIAL PRESSURE;

ALUMINA; CONTACT ANGLE; COOLING; DECOMPOSITION; IRON; OXYGEN; PARTIAL PRESSURE; SOLIDIFICATION;

LIQUID METALS;

EID: 33749859195     PISSN: 10735615     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11663-006-0063-2     Document Type: Review

References (54)

1. J. Takamura and S. Mizoguchi: Proc. 6th Int. Iron Steel Congr., Nagoya, 1990, pp. 21-26 and 591-604.
2. A.O. Kluken and O. Grong: Metall. Trans. A, 1989, vol. 20A, p. 1335-49.
3. C.E. Cross, O. Grong, and M. Mousavi: Scripta Mater., 1999, vol. 40 (10), pp. 1139-44.
4. A.O. Kluken, O. Grong, and G. Rorvik: Metall. Trans. A, 1990, vol. 21A, p. 2047.
5. J. Kim: Master's Thesis, Carnegie Mellon University, Pittsburgh, PA, 2005.
6. H. Fujimura, S. Tsuege, Y. Komizo, and T. Nishizawa: Tetsu-to- Hagané, 2001, vol. 87 (11), pp. 29-34.
7. T.E. Quested: Mater. Sci. Technol., 2004, vol. 20, pp. 1357-69.
8. A.L. Greer, P.S. Cooper, M.W. Meredith, W. Schneider, P. Schumacher, J.A. Spittle, and A. Tronche: Adv. Eng. Mater., 2003, vol. 5 (1-2), pp. 81-91.
9. M. Flemings and Y. Shiohara: Mater. Sci. Eng., 1984, vol. 65, pp. 157-70.
10. T.Z. Kattamis and M.C. Flemings: Trans. AIME, 1966, vol. 236, pp. 1523-32.
11. D. Turnbull and R.E. Cech: J. Appl. Phys., 1950, vol. 21, pp. 804-10.
12. Y. Gao, M. Kudoh, and K. Ohsasa: Bull. Faculty Eng., Hokkaido Univ., 1990, vol. 149, pp. 49-59.
13. M. Kudoh, K. Ohsasa, K. Tanaka, and K. Okuyama: Bull. Faculty Eng., Hokkaido Univ., 1992, vol. 162, pp. 191-202.
14. R. Rastogi: Ph.D. Thesis, Carnegie Mellon University, Pittsburgh, PA, 2000.
15. K. Nakajima, H. Hasegawa, S. Khumkoa, and S. Mizoguchi: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 539-47.
16. A. Abedi, M. Kudoh, and Y. Itoh: Iron Steel Inst. Jpn. Int., 1997, vol. 37 (8), pp. 770-75.
17. G. Abbaschian and M.C. Flemings: Metall. Trans. A, 1983, vol. 14A, pp. 1147-57.
18. T. Koseki and M.C. Flemings: Metall. Trans. A, 1995, vol. 26A, pp. 2991-99.
19. Y. Shiohara, M.C. Flemings, Y. Wu, and T.J. Piccone: Trans. Iron Steel Inst. Jpn., 1986, vol. 26, pp. B131-B134.
20. T.J. Piccone, Y. Wu, Y. Shiohara, and M.C. Flemings: Metall. Trans. A, 1987, vol. 18A, pp. 925-32.
21. Y. Guan, B. Song, and J. Mao: Acta Metall. Sinica, 2003, vol. 39 (3), pp. 283-86.
22. K. Nakajima, H. Hasegawa, S. Khumkoa, and S. Mizoguchi: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 539B-547B.
23. N. Eustathopoulos, M.G. Nicholas, and B. Drevet: Wettability at High Temperatures, Pergamon, Amsterdam, NY, 1999.
24. S. Ueda, H. Shi, X. Jiang, H. Shibata, and A.W. Cramb: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 503-08.
25. K. Ogino, K. Nogi, and Y. Koshida: Tetsu-to-Hagané, 1973, vol. 59 (10), pp. 1380-87.
26. K. Ogino, A. Adachi, and K. Nogi: Tetsu-to-Hagané, 1973, vol. 59 (9), pp. 1237-44.
27. N. Takiuchi, T. Taniguchi, N. Shinozaki, and K. Mukai: J. Jpn. Inst. Met., 1991, vol. 55 (1), pp. 44-49.
28. Z. Jun and K. Mukai: Iron Steel Inst. Jpn. Int., 1998, vol. 38 (10), pp. 1039-44.
29. B.T. Eldred and P.D. Ownby: Trans. JWRI, 2001, vol. 30, pp. 69-74.
30. N. Shinozaki, T. Fujita, and K. Mukai: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 506-09.
31. Z. Yuan, K. Mukai, K. Takagi, and M. Ohtaka: J. Jpn. Inst. Met., 2001, vol. 65 (1), pp. 21-28.
32. A.T. Hasouna, K. Nogi, and K. Ogino: Trans. Jpn. Inst. Met., 1998, vol. 29 (9), pp. 748-55.
33. D.R. Gaskell: Introduction to the Thermodynamics of Materials, 3rd ed., Taylor and Francis, Washington, D.C., 1995.
34. R. Fruehan: The Shaping and Treating of Steel, 11th ed., The AISE Steel Foundation, Pittsburgh, PA, 1998.
35. B. Gallois and C.H.P. Lupis: Metall. Trans. B, 1981, vol. 12B, pp. 549-57.
36. K. Nakashima, K. Takihira, K. Mori, and N. Shinozaki: Mater. Trans., JIM, 1992, vol. 33 (10), pp. 918-26.
37. H. Shibata, X. Juang, M. Valdez, and A. Cramb: Metall. Trans. B, 2004, vol. 35B, pp. 179-81.
38. Z. Jun and K. Mukai: Iron Steel Inst. Jpn. Int., 1998, vol. 38 (10), pp. 1039-44.
39. P. Shen, H. Fujii, T. Matsumoto, and K. Nogi: Acta Mater., 2003, vol. 51, pp. 4897-906.
40. K. Nakashima, K. Takihira, T. Miyazaki, and K. Mori: J. Am. Ceram. Soc., 1993, vol. 76 (12), pp. 3000-08.
41. H. Biloni and W. Boettinger: Physical Metallurgy, 4th ed., Elsevier Science, New York, NY, 1996, ch. 8.
42. A. Abedi, M. Kudoh, and Y. Itoh: Iron Steel Inst. Jpn. Int., 1995, vol. 52 (6), pp. 589-95.
43. A.W. Cramb and I. Jimbo: Steel Res., 1989, vol. 60, pp. 157-65.
44. Slag Atlas, 2nd ed., Verlag Stahleisen GmbH, Düsseldorf, Germany, 1995.
45. B.L. Jones and G.M. Weston: J. Austr. Inst. Met., 1970, vol. 15 (4), pp. 189-94.
46. C. Wan, P. Krisalis, B. Drevet, and N. Eustathopoulos: Mater. Sci. Eng., A, 1996, vol. 207, pp. 181-87.
47. V. Merlin and N. Eustathopoulos: J. Mater. Sci., 1995, vol. 30, pp. 3619-24.
48. K. Fuchigami: Master's Thesis, Carnegie Mellon University, Pittsburgh, PA, 2005.
49. B.L. Bramfitt: Metall. Trans., 1970, vol. 1.
50. G.N. Heintze and R. McPherson: Welding Res. Suppl., 1986, pp. 71s-82s.
51. A. Ostrowski and E.W. Langer: Scand. J. Metall., 1979, vol. 8, pp. 177-84.
52. O. Grong: Metallurgical Modeling of Welding, 2nd ed., The Institute of Materials, London, 1997.
53. M. Valdez, H. Shibata, S. Sridhar, and A.W. Cramb: Materials Science and Technology Conf., New Orleans, LA, 2004.
54. N. Phinichka: Ph.D. Thesis, Carnegie Mellon University, Pittsburgh, PA, 2001.