Impacts of a jet's exit flow pattern on mixing and combustion performance

Progress in Energy and Combustion Science

Volumn 32, Issue 5-6, 2006, Pages 496-538

  Nathan, G J ^a   Mi, J ^a   Alwahabi, Z T ^a   Newbold, G J R ^a   Nobes, D S ^a  

^a Turbulence   (Australia)

Author keywords

Jet entrainment; Jet mixing; Precessing jets; Radiation; Self excited jets.; Thermal NOx emissions

Indexed keywords

JET ENTRAINMENT; JET MIXING; PRECESSING JETS; SELF-EXCITED JETS; THERMAL NOX EMISSIONS;

CHEMICAL MODIFICATION; COMBUSTION; MOLECULAR DYNAMICS; NOZZLES; RADIATION; TURBULENCE;

FLOW PATTERNS;

EID: 33749673389     PISSN: 03601285     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.pecs.2006.07.002     Document Type: Review

References (143)

1. Abdel-Rahman A.A., Chakroun W., and Al-Fahed S.F. LDA measurements in the turbulent round jet. Mech Res Commun 24 3 (1997) 277-288
2. Abell CJ. Acoustic coupling in a turbulent flow. In: Proceedings of the 6th Australasian Hydr & Fluid Mech Conference (Adelaide), 1977 p.41-45.
3. Antonia R.A., and Bilger R.W. The heated round jet in a coflowing stream. AIAA J 14 11 (1976) 1541-1547
4. Badri Narayanan MA. Excitation of plane jet by twin vane oscillator: a preliminary investigation, Report no. AE 87 FM 1, Interim report, fluid dynamics laboratory, Bangalore: Department of Aerospace Engineering, Indian Institute of Science; 1987.
5. Badri Narayanan MA, Platzer MF. The mixing mechanism by organised turbulence structures in a plane jet excited by a novel mechanism. In: Proceedings of the IUTAM symposium on turbulence management and relaminarisation, 19-23 January, Bangalore; 1987.
6. Badri Narayanan MA, Raghu S. Two dimensional jet subjected to periodic oscillations in the potential core region. Report no. 82FM2, Bangalore: Fluid Dynamics Lab., Dept. Aeronautical Engineering, Indian Institute of Science; 1982.
7. Battaglia F., Kulkarni A.K., Feng J., and Merkle C.L. Simulation of planar flapping jets in confined channels. AIAA Paper 97-1992 (1997) 1-11
8. Battaglia F., Taverner S.J., Kulkarni A.K., and Merkle C.L. Bifurcation of low reynolds number flows in symmetric channels. AIAA J 35 12 (1996) 1-7
9. Binder G., and Favre-Marinet M. Some characteristics of pulsating or flapping jets. In: Michel R., Cousteix J., and Houdeville A. (Eds). Unsteady turbulent shear flows (1981), Springer, Toulouse, France 370-379
10. Bradshaw P. The effect of initial conditions on the development of a free shear layer. J Fluid Mech 26 (1966) 225-236
11. Brown G.L., and Roshko A. On density effects and large structure in turbulent mixing layers. J Fluid Mech 644 (1974) 775-816
12. Candel S.M. Combustion instabilities coupled by pressure waves and their active control. Proc Combust Inst 24 (1992) 1277-1296
13. Cervantes de Gortari J., and Goldschmidt V.W. The apparent flapping motion of a turbulent plane jet-further experimental results. ASME Trans J Fluids Eng 103 (1981) 119-126
14. Chen C.J., and Rodi W. Vertical turbulent buoyant jets-a review of experimental data (1980), Pergamon
15. Claypole T.C., and Syred N. The stabilization of flames in swirl combustors. J Inst Energy 55 (1982) 14-19
16. Crow S.C., and Champagne F.H. Orderly structure in jet turbulence. J Fluid Mech 483 (1971) 547-591
17. Danckwerts P.V. The definition and measurement of some characteristics of mixtures. Appl Sci Res Sec A 3 (1952) 279-296
18. Dahm W.J.A., and Dibble R.W. Coflowing turbulent jet diffusion flame blowout. Proc Combust Inst 22 (1988) 801-808
19. Dally B.B., Masri A.R., Barlow R.S., and Fiechtner G.J. Two-photon laser-induced fluorescence measurement of CO in turbulent nonpremixed bluff body flames. Combust Flame 132 1-2 (2003) 272-274
20. Decroix M.E., and Roberts W.L. Transient flow field effects on soot volume fraction in diffusion flames. Combust Sci Tech 160 (2000) 165-189
21. Delichatsios M.A., de Ris J., and Orloff L.L. An enhanced flame radiation burner. Proc Combust Inst 24 (1992) 1075-1082
22. Dimotakis P.E. The mixing transition in turbulent flows. J Fluid Mech 409 (2000) 69-98
23. Donbar J.M., Driscoll J.F., and Carter C.D. Reaction zone structure in turbulent nonpremixed jet flames-from CH-OH PLIF images. Combust Flame 122 1/2 (2000) 1-19
24. Donbar J.M., Driscoll J.F., and Carter C.D. Strain rate measured along the wrinkled flame contour within turbulent nonpremixed jet flames. Combust Flame 125 4 (2001) 1239-1257
25. Dyer T.M. Rayleigh scattering measurement of time-resolved concentration in a turbulent propane jet. AIAA J 17 8 (1979) 912-914
26. Favre-Marinet M., Binder G., and Hac T.V. Generation of oscillating jets. ASME Trans J Fluids Eng 103 (1981) 609-614
27. Flora J.J., and Goldschmidt V.M. AIAA J 7 (1969) 2344-2346
28. Galea SC, Simmons JM. Excitation of a plane jet by periodic perturbation of the nozzle area, 8th Australasian fluid mechanics conference, University of Newcastle, NSW; 1983.
29. George W.K., and Davidson L. Role of initial conditions in establishing asymptotic behaviour. AIAA J 42 3 (2004) 438-446
30. George W.K. Recent advances in turbulence. In: Arndt R.E.A., and George W.K. (Eds) (1989), Hemisphere, New York 39-73
31. 2O under post-flame conditions, combust. Sci Technol 110-111 (1995) 461-485
32. Guo B., Fletcher D.F., and Langrish T.A.G. Numerical simulation of unsteady turbulent flow in axisymmetric sudden expansions. J Fluids Eng 123 3 (2001) 574-587
33. Guo H., Liu F., and Smallwood G.J. Soot and NO Formation in counterflow ethylene/oxygen/nitrogen diffusion flames. Combust Theor Model 8 (2004) 475-489
34. Gutmark E., Parr T.P., Hanson-Parr D.M., and Schadow K.C. On the role of large and small-scale structures in combustion control. Combust Sci Tech 66 (1989) 107-126
35. Han D., and Mungal M.G. Direct measurements of entrainment in reacting/nonreacting turbulent jets. Combust Flame 124 4 (2001) 370-386
36. Han D., and Mungal M.G. Simultaneous measurements of velocity and CH distributions. Part I: jet flames in a co-flow. Combust Flame 132 3 (2003) 565-590
37. Haudiquert M., Cessou A., Stepowski D., and Copalle A. OH and soot concentration measurements in a high-temperature laminar diffusion flame. Combust Flame 111 (1997) 338-349
38. Hawthorne WR, Weddell DS, Hottel HC. Mixing and Combustion in Turbulent Gas Jets, Third symposium on combustion, flame and explosion phenomena. 1949; 266-288.
39. Hill B.J. Measurement of local entrainment rate in the initial region of axisymmetric turbulent air jets. J Fluid Mech 53 (1972) 773-779
40. Hill W.G., and Greene P.R. Increased turbulent jet mixing rates obtained by self excited acoustic oscillations. J Fluids Eng 99 (1977) 520-525
41. Hori M., Matsunaga N., Malte P.C., and Marinov N.M. The effect of low concentration fuels on the conversion of nitric oxide to nitrogen dioxide. Proc Combust Inst 24 (1992) 909-916
42. Husain D.Z., and Hussain F. Axisymmetric mixing layer: influence of the initial and boundary conditions. AIAA J 17 (1979) 48
43. Hussain F., and Clark A.R. On the coherent structure of the axisymmetric mixing layer: a flow-visualization study. J Fluid Mech 104 (1981) 263-294
44. Hussian A.K.M.F., and Hasan M.A.Z. The 'Whistler Nozzle' phenomenon. J Fluid Mech 134 (1983) 431-458
45. Jenkins BG. Modelling-it's plastic, mathematic, stochastic, elastic and fantastic. In: ISBN 0-86396-606-3, The University of Adelaide; thermal energy engineering and the environment, Adelaide International Workshop, 9-10 February, Zhang D-K and Nathan GJ,editors. 1999; pp. 265-82.
46. Kalghatgi G.T. Blow-out stability of gaseous jet diffusion flames. Part I: in still air. Combust Sci Technol 26 (1981) 233-239
47. Kelso RM. A Mechanism for jet precession in axisymmetric sudden expansions, In: Dally BB, editor. Proceedings of the 14th Australasian Fluid Mechanics Conference, Adelaide, Australia: 2, 10-14 December, 2004; 829-32.
48. Kent J.H., and Bastin S.J. Parametric effect on sooting in turbulent acetylene diffusion flames, Comb. Flame 56 (1984) 29-42
49. Kotsovinos N.E. Note on the conservation of the axial momentum of a turbulent jet. J Fluid Mech 87 (1978) 55-63
50. Kuhr C., Staus S., and Schönbucher A. Modelling of thermal radiation of pool fires. Prog Comput Fluid Dyn 3 2-4 (2003) 151
51. Lai J.C.S., and Simmons J.M. Instantaneous velocity measurements in a pulsed, plane turbulent jet. AIAA Journal 18 (1980) 1532-1534
52. Lai J.C.S., and Simmons J.M. Instantaneous velocity measurements in a vane-excited plane jet. AIAA Journal 23 8 (1985) 1157-1164
53. Lakshminarasimhan K, Ryan MD, Clemens NT, Ezekoye A. Mixing Characteristics in Strongly Forced Nonpremixed Methane Jet Flames, Proc. Combust Inst, 2006; 31, to appear.
54. Langman AS, Nathan GJ, Mi J, Ashman PJ. The influence of geometric nozzle profile on the global properties of a turbulent diffusion flame, Proc. Combust.Inst, 2006; 31, to appear.
55. Lee SK. Study of a naturally oscillating triangular jet flow PhD thesis, Department of Mechanical Engineering, The University of Adelaide, 2005.
56. Lee S.K., Lanspeary P.V., Nathan G.J., Kelso R.M., and Mi J. Low kinetic energy loss oscillating triangular-jet nozzles. Exp Therm Fluid Sci 27 (2003) 553-561
57. Luxton RE, Nathan GJ. Mixing using a fluid jet, Patent Application No PI4068/87, Australian Patent Office, 1987.
58. x clinker production. World Cement 00 (1994) 21-26
59. x burner providing process efficiency and product quality improvements. World Cement 4 (1993) 4-11
60. ManiasCG, BalendraAS, RetallackDJ. New combustion technology for lime production, World Cement, December, 1996.
61. Mi J., and Nathan G.J. Self-excited jet precession Strouhal number and its influence on turbulent mixing characteristics. J Fluids Struct 19 (2004) 851-862
62. Mi J, Kalt, P, Nathan GJ. Velocity measurements in a circular jet initially with high turbulence intensity. Dynamics of Continuous, Discrete & Impulsive Systems B, to appear in 2006.
63. Mi J., and Nathan G.J. Statistical analysis of the velocity field in a mechanical precessing jet flow. Phys Fluids 17,015102 1 (2005) 1-17
64. Mi J., and Nathan G.J. Mixing characteristics of a flapping jet from a self-exciting nozzle. Flow Turb Combust 67 (2001) 1-23
65. Mi J., Nathan G.J., and Luxton R.E. Centreline mixing characteristics of jets from nine differently shaped. Nozzles Exp Fluids 28 1 (2000) 93-95
66. Mi J., Nathan G.J., and Nobes D.S. Mixing characteristics of axisymmetric free jets from a contoured nozzle, an orifice plate and a pipe. J Fluid Eng, Trans ASME 123 (2001) 878-883
67. Mi J, Nathan GJ, Luxton RE. Oscillating jets Australian patent application no. PP 12194/99, (PCT/AU98/00959), Publication Date: 5 Aug 1999, Awarded in Australia: 18 April, 2002. The US Patent No. 6685102 (2004.2), European Pat. No. 1032789 (2004.9), Australian Pat. No. 746248 (2004.2), New Zealand Pat. No. 504470 (2003.7). 1999.
68. Mi J, Nathan GJ. The segregation of a turbulent jet and its ambient fluid, Dynamics of Continuous, Discrete & Impulsive Systems B 2006, to appear.
69. Mi J., Nobes D.S., and Nathan G.J. Influence of jet exit conditions on the passive scalar field of an axisymmetric free jet. J Fluid Mech 432 (2001) 91-125
70. x, high efficiency multistaged burner: fuel oil results. J Air Poll Contr Assoc 389 (1988) 1162-1167
71. Mungal M.G., Karasso P.S., and Lozano A. The visible structure of turbulent jet diffusion: large-scale organisation and flame tip oscillation. Combust Sci Technol 76 (1991) 165-185
72. Muniz L., and Mungal M.G. Instantaneous flame stabilisation in lifted jet diffusion flames. Combust Flame 111 (1997) 16-31
73. Nathan GJ. The enhanced mixing burner. PhD thesis, Department of Mechanical Engineering, The University of Adelaide; 1988.
74. Nathan GJ, Hill SJ. Full scale assessment of the influence of a precessing jet of air on the Performance of pulverised coal flame in a cement kiln In: Leuckel RW, editors. In: Proceedings of the 6th European confeence on ind furn. & boilers. vol. 1. 2002, p. 155-68.
75. Nathan G.J., Hill S.J., and Luxton R.E. An axisymmetric fluidic nozzle to generate jet precession. J Fluid Mech 370 (1998) 347-380
76. Nathan G.J., Mullinger P.J., Bridger D., and Martin B. Investigation of a combustion driven oscillation in a refinery flare-Part A: full scale assessment. Exp Therm Fluid Sci 30 (2006) 285-295
77. x emissions from natural gas flames, combustion and emissions Control III, The Institute of Energy, pp. 49-69, ISBN 090 2597558, Pergamon Press. 1997; And ISBN 0-08-0429955, [Chapter 1].
78. x emissions and radiation from turbulent flames. Combust Sci Technol 112 (1996) 211-230
79. Nathan G.J., and Luxton R.E. A stable, un-premixed gas burner with infinite turn-down ratio, 1st European conference on industrial furnaces and boilers, March. (1988), Lisbon, Portugal
80. Nathan G.J., and Luxton R.E. Flame stability and emission characteristics of the enhanced mixing burner, 2nd European conference on industrial furnaces and boilers, April. (1991), Algarve, Portugal
81. Nathan GJ, Manias CG. 1994. Gyrotherm burner handbook-for kiln no. 8 burner client: Geelong Cement, Geelong, Victoria, Australia, Internal report, Adelaide Brighton Management Ltd.
82. x emissions and radiation from turbulent flames. Combust Sci Technol 112 (1996) 211-230
83. x emission characteristics of unconfined turbulent jet diffusion flames. Develop Chem Eng Min Proc 7 (1999) 361-374
84. Newbold G.J.R., Nathan G.J., and Luxton R.E. The large scale dynamic behaviour of an unconfined precessing jet flame. Combust Sci Technol 126 (1997) 71-95
85. x emissions from unconfined propane flames from turbulent-jet, bluff-body, swirl and precessing jet burners. Proc Combust Inst 28 (2000) 481-487
86. Newbold GJR. PhD thesis, Department of Mechanical Engineering, The University of Adelaide; 1997.
87. Nobes DS, PhD thesis, Department of Mechanical Engineering, The University of Adelaide; 1998.
88. Ono Y. Microscopical estimation of burning condition and quality of clinker. 7th Int Cong Chem Cement 2 (1980) 206-211
89. Parekh DE, Reynolds WC, Mungal MG. 1987. Bifurcation of Round Air Jets by Dual-Mode Acoustic Excitation, AIAA Paper 87-0164.
90. x emissions in gas fired rotary kilns. J Inst Energy 73 (2000) 25-34
91. Parham J.J., Nathan G.J., Hill S.J., and Mullinger P.J. A modified Thring-Newby scaling criterion for confined, rapidly-spreading and unsteady jets. Combust Sci Technol 177 (2005) 1-27
92. Parham JJ. PhD thesis, 2000, Department of Mechanical Engineering, The University of Adelaide.
93. Piatt M, Vietts H. 1979. Conditioned sampling in an unsteady jet. AIAA paper 79-1857.
94. Platzer M.F., Simmons J.M., and Bremhorst K. Entrainment characteristics of unsteady subsonic jets. AIAA J 16 (1978) 282-284
95. Putnam A.A. Combustion driven oscillations in industry (1971), American Elsevier Pub. Co., New York. 0444001018
96. Qamar NH, Nathan GJ, Alwahabi ZT, King KD. The effect of global mixing on soot volume fraction: Measurements in simple Jet, precessing jet and bluff body flames. In: Proceedings Combust. Inst. 30, 2004, to appear.
97. Quinn W.R. Development of a large-aspect-ratio rectangular turbulent free jet. AIAA J 32 (1994) 547-554
98. Raman G., Rice E.J., and Cornelius D.M. Evaluation of flip-flop jet nozzles for use as practical excitation devices. J Fluids Eng 116 (1994) 508-515
99. Reppel J, Alwahabi ZT, Nathan GJ, King KD. 2006. Insight into the Structure of Precessing Jet Methane Flames from Large Planar Images of Hydroxyl Radical Distributions, Combust Flame, submitted for pubication.
100. Reppel J. PhD thesis, 2003, Department of Chemical Engineering, The University of Adelaide.
101. Reynolds W.C., Parekh D.E., and Juvet P.J.D. Lee MJDBifurcating and blooming jets. Ann Rev Fluid Mech 35 (2003) 295-315
102. Rhine JM, Tucker RJ. Modelling of gas-fired furnaces and boilers, McGraw Hill; New York: 1991.
103. Richards C.D., and Pitts W.M. Global density effects on the self-preservation behaviour of turbulent free jets. J Fluid Mech 245 (1993) 417-435
104. Ricou F.P., and Spalding D.B. Measurements of entrainment by axisymmetrical turbulent jets. J Fluid Mech 11 (1961) 21-32
105. Røkke N.A., Hustad J.E., and Sønju O.K. Combust Flame 97 (1994) 88-106
106. Røkke N.A., Hustad J.E., Sønju O.K., and Williams F.A. Proc Combust Inst 24 (1992) 385-393
107. Schneider GM. 1996. Structures and turbulence characteristics in a precessing jet flow. PhD thesis, Department of Mechanical Engineering, The University of Adelaide.
108. Schneider G.M., Froud D., Syred N., Nathan G.J., and Luxton R.E. Velocity measurements in a precessing jet flow using a three dimensional LDA system. Exp Fluids 23 (1997) 89-98
109. Schneider G.M., Nathan G.J., Luxton R.E., Hooper J.D., and Musgrove A.R. Velocity and reynolds stresses in a precessing jet flow. Exp Fluids 22 (1997) 489-495
110. Selle L., Benoit L., Poinsot T., Nocoud F., and Wrebs W. Joint use of compressible large-eddy simulation and Helmholtz solvers for the analysis of rotating modes in an industrial swirled burner. Comb Flame 145 1/2 (2006) 194-205
111. Shakouchi T. An experimental study on the cavity type fluidic oscillator. Res Rep Fac Eng Mie Univ 6 (1981) 1-13
112. Simmons J.M., Lai J.C.S., and Platzer M.F. Jet excitation by an oscillating vane. AIAA J 19 (1981) 673-676
113. Simmons J.M., Plazer M.F., and Smith T.C. Velocity measurements in an oscillating plane jet issueing into a moving air stream. J Fluid Mech 84 1 (1978) 33-53
114. x and optimisation of burnout with an aerodynamically air-staged burner and an air-staged precombustor burner. J Inst Energy (1989) 237-245
115. Smith EJ, Nathan GJ, Qamar NH, Dally BB. 2005. Comparison of thermocouple temperature measurements of simple and precessing jet propane flames 5th Asia-Pacific conference on combustion. Nathan, Dally Kalt,editors. The University of Adelaide, Adelaide, Australia, 18-20 July 2005
116. x pulverised fuel flames-preliminary results from small scale trials. Fuel 77 9/10 (1998) 1013-1016
117. Smith N.L., Nathan G.J., Zhang D.-K., and Nobes D.S. The significance of particle clusters in pulverised coal flames. Proc Combust Inst 29 (2002) 797-804
118. x emission reduction with precessing jet P.F. flames. Proc The Combust Inst 27 (1998) 3173-3180
119. Syred N., and Beer J.M. Combustion in swirling flow: a review. Combust Flame 23 (1974) 143-201
120. Syred. A review of oscillation mechanisms and the role of the precessing vortex core (PVC) in swirl combustion systems. Prog Energy Combust Sci 32 2 (2006) 93-161
121. Thring MW, Newby MP. 1953. Combustion length of enclosed turbulent flames. In: 4th (Intl) symp. combust., p.789-96. The Williams & Wilkins Co.
122. Townsend A.A. The structure of turbulent shear flow. 2nd ed (1976), Cambridge University Press, Cambridge
123. Tso J., and Hussain F. Organised motions in a fully developed turbulent axi-symmetric jet. J Fluid Mech 203 (1989) 425-448
124. Turns S.R. An introduction to combustion concepts and applications. 2nd ed (2000), McGraw-Hill, Cambridge
125. Turns S.R., and Myhr F.H. Oxides of nitrogen emissions from turbulent jet flames: part I-fuel effects and flame radiation. Combust Flame 87 (1991) 319-335
126. Upatnieks A., Driscoll J.F., Rasmussen C.C., and Ceccio S.L. Lift-off of turbulent jet flames-assessment of the edge flame and other concepts using cinema PIV. Combust Flame 138 (2004) 259-272
127. Vandsburger I.M., Kennedy I.M., and Glassman I. Sooting counter-flow diffusion flames with varying velocity gradients. Proc Combust Inst 20 (1984) 1105-1112
128. Videgar R. Gyro-therm technology solves burner problems World Cement, November, 1997.
129. Viets H. Flip-flop jet nozzle. AIAA J 13 (1975) 1375-1379
130. Weber R. 1998. The spirit of Ijmuiden-fifty years of the IFRF, 1948-1998, ISBN 90-801495-2-7, The International Flame Research Foundation.
131. Wilson R.V., and Demuren A.O. Numerical simulation of turbulent jets with rectangular cross section. J Fluids Eng, Trans ASME 120 (1998) 285-290
132. Wong C.Y., Lanspeary P.V., Nathan G.J., Kelso R.M., and O'Doherty T. Phase-averaged velocity in a fluidic precessing jet nozzle and in its near external field. J Exp Fluid Therm Sci 27 5 (2003) 515-524
133. Wong CY, Nathan GJ, O'Doherty T. The effect of initial conditions on the flow exiting from a fluidic precessing jet nozzle, experiments in fluids, 2003. on-line first:〈www.link.springer-ny.com/link/service/journals/00348/content s/03/00642/paper/s00348-003-0623-9〉.
134. Wong C.Y., Lanspeary P.V., Nathan G.J., Kelso R.M., and O'Doherty T. Phase-averaged velocity in a fluidic precessing jet nozzle and in its near external field. Exp Therm Fluid Sci 27 (2003) 515
135. Wong CY. Flow within and in the near external field of a precessing jet nozzle. PhD thesis, Department of Mechanical Engineering, The University of Adelaide; 2004.
136. Wong CY, Nathan GJ, Kelso RM. In: Behnia M, Li W, McBain GD, editors. The external flow structure of a naturally precessing jet, ISBN: 1-864-87695-6 (CD-ROM), The University of Sydney, Sydney, Australia, 2003; 13-17 December 2004. Paper AFMC00055.
137. Wong CY, Nathan GJ, Mi J. The near-field structure of free jets from a contoured nozzle, a long pipe and an orifice plate. In: Proc. laser diagnostics in fluid mechanics and combustion, vol. IV, Mc Larens on the Lake, Adelaide; 2005.
138. Xu G., and Antonia R.A. Effect of different initial conditions on a turbulent round free jet. Exp Fluids 33 (2002) 677-683
139. Yoda M., Hesselink L., and Mungal M.G. Instantaneous three-dimensional concentration measurements in the self-similar region of a round high-Schmidt-number jet. J Fluid Mech 279 (1994) 313-350
140. Yule A.J. Large-scale structure in the mixing layer of a round jet. J Fluid Mech 89 (1978) 412-432
141. Zaman K.B.M.Q., and Hussain A.K.M.F. Natural large-scale structures in the axisymmetric mixing layer. J Fluid Mech 138 (1984) 325-351
142. Zinn B.T. Pulsed combustion: recent applications and research issues. Proc Combust Inst 24 (1992) 1297-1305
143. Zukoski EE, Cetegen BM, Kubota T. Visible structure of buoyant diffusion flames. 20th symposium (international) on combustion. The Combustion Institute, 1984; p.361-6.