Integration of geometric and mechanistic models of NC machining into an open-architecture machine tool controller

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

Volumn 2000-O, Issue , 2000, Pages 675-682

  Jerard, Robert B ^a   Fussell, Barry K ^a   Ercan, Mustafa T ^a   Hemmett, Jeffrey G ^a  

^a Univ of New Hampshire   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER ARCHITECTURE; MACHINING;

FEED-RATE OPTIMIZATION; GEOMETRIC MODELS; MACHINE TOOLS CONTROLLER; MECHANISTIC MODELS; MODELLING AND CONTROLS; NC-MACHINING; NOVEL METHODS; OPEN ARCHITECTURE CONTROLLERS; OPEN-ARCHITECTURES; PRODUCTIVITY IMPROVEMENTS;

MACHINE TOOLS;

EID: 33749415016     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2000-2408     Document Type: Conference Paper

References (35)

1. Altintas, Y., 1992, "Prediction of Cutting Forces and Tool Breakage in Milling from Feed Drive Current Monitoring", ASME Transactions Journal of Engineering for Industry, Vol. 114, pp386-392.
2. Altintas, Y., "A Hierarchical Open-Architecture CNC System for Machine Tools", Annals of the CIRP, vol. 43, pp. 349-354, 1994.
3. Austin S., R. B. Jerard and S. Drysdale, "Comparison of Discretization Algorithms for NURBS Surfaces with Application to Numerically Controlled Machining", Computer Aided Design, vol. 29, No. 1, pp 71-83, Jan. 1997.
4. Choi, B and R Jerard, Sculptured Surface Machining - Theory and Applications. Kluwer Academic Publishers, 1998, ISBN 0-412-78020-8
5. DeVor, R. E., W. A. Kline and W. J. Zdeblick, "A Mechanistic Model for the Force System in End Milling with Application to Machining Airframe Structures", Proceedings of the 8th North American Manufacturing Research Conference, pp. 297-303, Rolla, Missouri, May 1980.
6. Dolen, M. " Cutting Force Estimation for CNC Machine Tools by Feed Drive Current Monitoring", M. S. Thesis, Department of Mechanical Engineering, University of New Hampshire, 1994.
7. Drysdale, R. L., R. B. Jerard, B. Schaudt and K. Hauck, "Discrete Simulation of NC Machining", Algorithmica Special Issue on Computational Geometry, 4, (1), pp. 33-60, 1989.
8. FeatureCam Software, Engineering Geometry Solutions, http://www.featurecam.com/
9. Fussell, B. K. and K. Srinivasan, "An Investigation of the End Milling Process Under Varying Machining Conditions", Transactions of the ASME, Journal of Engineering for Industry, Vol. 1, pp. 27-36, Jan. 1989.
10. Fussell, B. K., C. Ersoy, R. B. Jerard, "Computer Generated CNC Machining Feedrates, ", USA/Japan Symposium on Flexible Manufacturing, San Francisco, July 13-15, 1992.
11. Fussell, B. K., R. B. Jerard and O. K. Durdag, "Geometric and Mechanistic Model Integration for 3-Axis CNC Feedrate Generation", ASME Winter Annual Meeting, San Francisco, Dec. 1995.
12. Fussell, B. K. R. B. Jerard and J. G Hemmett, "CNC Feed Velocity Selection for Sculptured Surface Machining", Proceedings of the 2000 NSF Design and Manufacturing System Conference", Vancouver, B. C., Canada, Jan. 3-6.
13. Hemmett, J. G, B. K. Fussell and R. B. Jerard, "A Robust and Efficient Approach to Feedrate Selection for 3-axis Machining", Dynamics and Control of Material Removal Processes, 2000 ASME International Mechanical Engineering Congress, Nov. 5-10, Orlando, FL.
14. Hemmett, J. G. B. K. Fussell, and KB. Jerard, "Automatic 5-axis CNC feed-rate selection via discrete mechanistic, geometric and machine model integration", Proceedings of the IFTP TC5 WG5.3 Conference on Sculptured Surface Machining, Kluwer Academic Publishers, 1999.
15. Ismail, H., M. A. Elbestawi, R. Du, K. Urbasik, "Generation of Milled Surfaces Including Tool Dynamics and Wear", Transactions of the ASME, Journal of Engineering for Industry, August 1993, Vol. 115, pp. 245-252.
16. Jerard, R. B., R. L. Drysdale, B. Schaudt, K. Hauck and J. Magewick, "Methods for Detecting Errors in Sculptured Surface Machining", IEEE Computer Graphics and Applications, Jan. 1989, pp. 26-39.
17. Jerard, R. B., S. Z. Hussaini, R. L. Drysdale, and B. Schaudt, "Approximate Methods for Simulation and Verification of Numerically Controlled Machining Programs", The Visual Computer, vol. 5, no. 6, pp 329-348, 1989.
18. Jerard, R. B. and B. K. Fussell, "Toolpath Optimization by Real-time Application of an Integrated Geometric/Mechanistic Model", Proceedings of the 1999 NSF Design and Manufacturing System Conference", Long Beach, California, Jan. 5-8.
19. Kline, W. A., R. E. DeVor and J. R. Lindberg, "The Prediction of Cutting forces in End Milling with Application to Cornering Cuts", International Journal of Machine Tool Design and Research, Vol. 22, no. 1, pp. 7-22, Pergamon Press, 1982.
20. Kline, W. A. and R. E. DeVor, "The Effect of Runout on cutting Geometry and Forces in End Milling", International Journal of Machine Tool Design and Research, Vol. 23, pp. 123-140, Pergamon Press, 1983.
21. Kops, L. and D. T. Vo, "Determination of the Equivalent Diameter of an End Mill", Annals of CIRP, vol. 39/1, 1990, pp 93-96.
22. Koren, Y., Z. Pasek, G Ulsoy, U. Benchetrit, "Real-Time Open Architectures and System Performance", Annals of the CIRP, Vol. 45 (1996/1)
23. Li, S. X and R. B. Jerard, "Five Axis Machining of Sculptured Surfaces with a Flat-end Cutter", Computer Aided Design, March 1994
24. ndEd., Metcut Research Associates, 1972.
25. MDSI Inc., Ann Arbor, MI, http://www.mdsi2.com/
26. Park, J., Z. Pasek, Y. Shan, Y. Koren, K. Shin and G Ulsoy, "An Open Architecture Controller Real-Time Controller for Machining Processes", CRIP 27, May 21-23, 1995, Ann Arbor, MI
27. Scofield, S., and Wright, P. K., "IMADE: A Hierarchy for Intelligent Machines", Concurrent Product and Process Engineering, ASME, MED - vol. 1. pp 53-65. see also http://infopad.eecs.berkeley.edu/~fuchung/papers/canada96/canada96.htm
28. Tlusty, J. and P. MacNeil, "Dynamics of Cutting Forces in End Milling, "Annals of the CIRR Vol. 24/1, 1975.
29. Spence, AD and Altintas, Y, (1994), A Solid Modeller based Milling Process Simulation and Planning System, ASME Journal of Engineering for Industry, 116, Feb., pp 61-69
30. VenturCom Inc., Cambridge, MA, http://www.vci.com
31. Vericut Optipath Software, CGTech Corporation, http//www/cgtech.com
32. Wright, P. K., Scofield, S. and Fu-chung, W.. "Open-Architecture Control for Machine Tools", http://infopad.eecs.berkeley.edu/~fuchung/papers/canada96/camada96.html.
33. Yang, M. Y. and H. Park", The Prediction of Cutting Force in Ball - End Milling", International Journal of Tools Manufacturing, Vol. 31, No. 1, pp 45-51, 1991.
34. Yang, M. Y. and C. G Sim", Reduction of Machining Errors by Adjustment of Feedrates in the Ball-End Milling Process", International Journal of Production Research, Vol. 31, No. 3, pp 665-689, 1993.
35. Yellowley, I. and Pottier, P. R., "The Integration of Process and Geometry within an Open Architecture Machine Tool Controller", Int. J. Mach. Tools and Manufacture, Vol. 34, N2, pp. 277-293, 1994.