Shear strength of steel fiber reinforced concrete beams with stirrups

Structural Engineering and Mechanics

Volumn 24, Issue 1, 2006, Pages 107-136

  Campione, G ^a   La Mendola, L ^a   Papia, M ^a  

^a UNIVERSITY OF PALERMO   (Italy)

Author keywords

Concrete; Fibers; Shear strength; Shear moment interaction; Stirrups

Indexed keywords

BARS (METAL); FUNCTION EVALUATION; REINFORCED CONCRETE; SHEAR STRENGTH; STEEL CONSTRUCTION;

REINFORCING FIBERS; SHEAR-MOMENT INTERACTION; STIRRUPS;

CONCRETE BEAMS AND GIRDERS;

EID: 33749390704     PISSN: 12254568     EISSN: None     Source Type: Journal    
DOI: 10.12989/sem.2006.24.1.107     Document Type: Article

References (46)

1. ACI Committe 544 (1988), "Design considerations for steel fiber reinforced concrete", ACI Struct. J., 85(5), 563-580.
2. ACI Committe 408 (1992), "Abstract of : State-of-the-art-report: Bond under cyclic loads", ACI Mater. J., 88(6), 669-673.
3. ACI Committee 318 (2002), "Building code requirements for reinforced concrete (ACI 318-95)", and Commentary ACI 318RM-02, American Concrete Institute, Detroit, Michigan.
4. Adebar, P., Mindess, S. St-Pierre, D. and Olund, B. (1997), "Shear tests of fiber concrete beams without stirrups", ACI Struct. J., 94(1), 68-76.
5. Al-Ta'an, S.A. and Al-Feel, J.R. (1990), "Evaluation of shear strength of fibre-reinforced concrete beams", Cement & Concrete Composites, 12(2), 87-94.
6. Ashour, S.A., Hasanain, GS. and Wafa, F. (1992), "Shear behavior of high strength fiber reinforced concrete beams", ACI Struct. J., 89(2), 176-183.
7. Balazs, G.L. and Kovacs, I. (2000), "Flexural behaviour of R.C. and P.C. beams with steel fibres", Proc. Int. Work. Structural Application of Steel Fibre Reinforced Concrete, Milan 4th April 2000, Politecncio of Milan, 85-92.
8. Banthia, N. and Trottier, J.F. (1994), "Concrete reinforced with deformed steel fibers, Part I: Bond-slip mechanism", ACI Mater. J., 91(5), 435-446.
9. Bazant, Z.P. and Kim, J.K. (1984), "Size effect in shear failure of longitudinally reinforced beams", ACI Struct. J., 81(5), 456-468.
10. Bresler, B. and Scordelis, A.C. (1961), "Shear strength of reinforced concrete beams", Struct. Mater., Res. Dept. of Civil Eng., Univ. of California, Berkeley, 1961. Serie 100 Issue 13.
11. Campione, G., Mindess, S., Scibilia, N. and Zingone, G. (2000), "Strength of hollow circular steel section filled with fibre-reinforced concrete", Canadian J. Struct. Eng., 27(5), 354-372.
12. Campione, G and Mindess, S. (1999), "Fibers as shear reinforcement for high strength reinforced concrete beams containing stirrups", Proc. 3° Int. RILEM Work. High Performance Fiber Reinforced Cement Composites HPFRCC3, Edited by Reihardt, H.W. and Naaman, A.E., 519-523.
13. Campione, G., La Mendola, L. and Zingone, G. (2000), "Fexural-shear interaction in high strength fibre reinforced concrete beams", Proc. of Fifth RILEM Symposium on Fibre-reinforced Concretes (FRC), BEFIB 2000, Lyon, France, 451-460.
14. Campione, G., Cucchiara, C. and La Mendola, L. (2003), "Role of fibres and stirrups on the experimental behaviour of reinforced concrete beams and flexure and shear", Int. Conf. on Composites in Construction, settembre 2003, Rende, Italy.
15. Campione, G., Cucchiara, C., La Mendola, L. and Papia, M. (2004), "Steel-concrete bond in lightweight fiber reinforced concrete under monotonic and cyclic actions", Eng. Struct., 27(6), 881-890.
16. Casanova, P. and Rossi, P. (1997), "Analysis and desing of steel fiber reinforced concrete beams", ACI Struct. J. 94, 595-602.
17. Chen, H.J., Huang, C.H. and Kao, Z.Y. (2004), "Experimental investigation on steel-concrete bond in lightweight and normal weight concrete", Struct. Eng. Mech., 17(2), 141-152.
18. Cho, S. and Kim, Y. (2003), "Effects of steel fibers on short beams loaded in shear", ACI Struct. J., 100(6), 765-774.
19. CNR-DT 204/2006, "Instructions for Design, Execution and Control of Fibrous Reinforced Concrete Structures", 79pp, Consiglio Nazionale Ricerche, ROMA, (only available in Italian).
20. Cucchiara, C., La Mendola, L. and Papia, M. (2004), "Effectiveness of stirrups and steel fibres as shear reinforcement", Cement & Concrete Composites, 26, 777-786.
21. Di Prisco, M. and Romero, J.A. (1996), "Diagonal shear in thin-webbed reinforced concrete beams: Fibre and stirrup roles at shear collapse", Magazine of Concrete Research, 48(174), 59-76.
22. Dupont, D. and Vandewalle, L. (2003), "Shear capacity of concrete beams containing longitudinal reinforcement and steel fibers", ACI SP-216 Innovations in Fiber-reinforced Concrete for Value, Editors, N. Banthia, M. Criswell, P. Tatnall and K. Folliard, 78-94.
23. Eurocode 2, "Design of Concrete Structures", EC2 Part 1. Commission of the European Communities 1989. concrete under compression, Cement & Concrete Composite, 1999, 21, 383-390.
24. Furlan, S. and De Hanai, J.B. (1997), "Shear behaviour of fiber reinforced concrete beams", Cement & Concrete Composites, 19(4), 359-366.
25. Gettu, R. Barragan, B.E., Sousa, J.L.A.O., Martin, M.A. and Burnett, I. (2002), "Experimental and numerical study of shear failure of fiber reinforced concrete beams", High Performance Concrete Performance and Quality of Concrete Structures, Proc. Third Int. CANMET/SACI Int. Conf. (Recife, Brazile) Suplementary CD, ACI International Farmington Hills Michigan, USA, 10 p.
26. Harajli, M., Hout, M. and Jalkh, W. (1995), "Local bond stress-slip behavior of reinforcing bars embedded in plain and fiber concrete", ACI Mater. J., 4(1), 343-353.
27. Harajli, M. (2004), "Effect of fiber reinforcement on the response of RC columns under static and seismic loading", Proc. 6th Symposium on Fibre-Reinforced Concrete (FRC) - BEFIB 2004 20-22 September 2004, Varenna, Italy, 1207-1216.
28. Hota, S. and Naaman, A. (1997), "Bond stress-slip response of reinforcing bars embedded in FRC matrices under monotonic and cyclic loading", ACI Struct. J., 4(5), 525-537.
29. Imam, M., Vandewalle, L. and Mortelmans, F. (1995), "Shear-moment analysis of reinforced high strength concrete beams containing steel fibres", Canadian J. Civil Eng., 22(3), 462-470.
30. Kani, G.N.J. (1964), "Riddle of shear failure and its solution", ACI Journal Proc., 61(4), April, 441-467.
31. Kearsley, E.P. and Moster, F.P. (2004), "The effect of fibers on the shear strength of reinforced concrete beams", Proc. 6th Symposium on Fibre-Reinforced Concrete (FRC) - BEFIB 2004 20-22 September 2004, Varenna, Italy, 955-964.
32. Khuntia, M., Stojadinovic, B. and Goel, S.C. (1999), "Shear strength of normal and high-strength fiber reinforced concrete beams without stirrups", ACI Struct. J., 92(2), 282-289.
33. Kim, D., Kim, W. and White, R. (2002), "Arch action in reinforced concrete beams - a rational prediction of shear strength", ACI Struct. J., 96(4), 586-593.
34. Mansur, M.A., Ong, K.C.G and Paramasivam, P. (1986), "Shear strength of fibrous concrete beams without stirrups", J. Struct. Eng., ASCE, 112(9), 2066-2079.
35. Narayanan, R. and Darwish, Y.S. (1986), "Use of steel fibers as shear reinforcement", ACI Struct. J., May-June, title, 84-S23, 216-227.
36. Nataraja, M.C., Dhang, N. and Gupta, A.P. (1999), "Stress-strain curves for steel fiber reinforced cncrete under compression", Cement & Concrete Composite, 21, 383-390.
37. Naaman, A.E. (2003), "Strain hardening and deflection hardening fiber reinforced cement composites", Proc. of IV Intern. RILEM Workshop, "High performance fiber reinforced cement composites (HPFRCC4), Ann Arbour, MI, US, 2003, 95-113.
38. Tompos, E.J. and Frosch, R.J. (2002), "Influence of beam size, longitudinal reinforcement, and stirrups effectiveness on concrete shear strength", ACI Struct. J., 99(5), 559-567.
39. RILEM TC 162-TDF (2003), "Recommendations σ-ε design method of SFRC", Mater. Struct, 36, October 2003, 560-567.
40. Russo, G. and Puleri, G (1997), "Stirrup effectiveness in reinforced concrete beams under flexure and shear", ACI Struct. J., 94(3), 227-238.
41. Sharma, A.K. (1986), "Shear strength of steel fiber reinforced concrete beams", ACI Struct. J., 83(4), 624-628.
42. Swamy, R.N., Jones, R. and Chima, T.P. (1993), "Influence of steel fibers on the shear resistance of lightweight concrete I-beams", ACI Struct. J., 90(1), 103-114.
43. Swamy, R.N. and Bahia, H.M. (1979), "Influence of fiber reinforcement on the dowel resistance to shear", ACI Struct. J., Feb. 1979, 327-355.
44. Valle, M. and Buyukozturk, O. (1993), "Behaviour of fiber reinforced high-strength concrete under direct shear", ACI Struct. J., 90(2), 122-133.
45. Zingone, G., Papia, M. and Campione, G. (1999), "Experimental investigation on fibre pull-out from normal and high strength concrete", Int. Confess Creating with Concrete, Dundee, Scotland, Extending performance of concrete structures, September 1999, 229-237.
46. Zsutty, T.C. (1971), "Beam shear strength prediction by analysis of separate categories of simple beam tests", ACI Struct. J., 68(11), 943-951.