A survey of efficiency estimation methods of in-service induction motors with considerations of condition monitoring requirements

2005 IEEE International Conference on Electric Machines and Drives

Volumn , Issue , 2005, Pages 1365-1372

  Lu, Bin ^a   Habetler, Thomas G ^a   Harley, Ronald G ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Condition monitoring; Efficiency estimation; In service testing; Induction motor; Rotor speed estimation; Stator resistance estimation

Indexed keywords

EFFICIENCY ESTIMATION; IN-SERVICE TESTING; ROTOR SPEED ESTIMATION; STATOR RESISTANCE ESTIMATION;

CONDITION MONITORING; ELECTRIC MACHINERY TESTING; ELECTRIC RESISTANCE; MAINTAINABILITY; METHOD OF MOMENTS; PHYSICAL PROPERTIES; RELIABILITY; ROTORS; SPEED; STATORS; SYSTEM STABILITY;

INDUCTION MOTORS;

EID: 33749040948     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (42)

1. B. Lu, T. G. Habetler, and R. G. Harley, "A survey of available methods for evaluating in-service motor efficiency," EATON WSN Research Report, Georgia Institute of Technology, Oct. 2004.
2. T. G. Habetler, R. G. Harley, R. M. Tallam, S. B. Lee, R. Obaid, and J. Stack, "Complete current-based induction motor condition monitoring: stator, rotor, bearings, and load," CIEP 2002 VIII IEEE International Power Electronics Congress, Oct. 2002.
3. J. Hsu, J. Kueck, M. Olszewski, D. Casada, P. Otaduy, and L. Tolbert, "Comparison of induction motor field efficiency estimation methods," IEEE Trans. Ind. Appl., vol. 34, no. 1, Jan./Feb. 1998.
4. J. D. Kueck, M. Olszewski, D. A. Casada, J. Hsu, P. J. Otaduy, and L. M. Tolbert, "Assessment of methods for estimating motor efficiency and load under field conditions," Oak Ridge National Laboratory report, ORNL/ TM-13165, 1996.
5. A. Wallance, A. Von Jouanne, E. Wiedenbrug, E. Matheson, and J. Douglass, "A laboratory assessment of in-service and non-intrusive motor efficiency testing methods," Electric Power Components and Systems, vol. 29, pp. 517-529, 2001.
6. J. D. Kueck, "Development of a method for estimating motor efficiency and analyzing motor condition," IEEE Pulp and Paper Industry Technical Conference, pp. 67-72, June 1998.
7. W. Benning, "Method of determining the efficiency of asynchronous motors and apparatus for carrying out the method," United States Patent 5,659,232, 1997.
8. R. L. Nailen, "Finding true power output isn't easy," Electrical Apparatus, Feb. 1994.
9. "In-plant electric motor loading and efficiency techniques," Market Literature, Ontario Hydro.
10. B. S. Guru and H. R. Hiziroglu, Electric Machinery and Transformers, 3rd ed., Oxford University Press, 2001, Chapter 8.
11. J. R. Holmquist, J. A. Rooks, and M. E. Richter, "Practical approach for determining motor efficiency in the field using calculated and measured values," IEEE Trans. Ind. Appl., vol. 40, no. 1, pp. 242-248, Jan./Feb. 2004.
12. NEMA-MG 1 Standard, 2003.
13. IEEE Standard Test Procedure for Polyphase Induction Motors and Generators, IEEE Std 112-1996, Sept. 1996.
14. A. Dell'Aquila, L. Salvatore, and M. Savino, "A new test method for determination of induction motor efficiency," IEEE Trans. Power Appara. Sys., vol. PAS-103, no. 10, pp. 2961-2973, Oct. 1984.
15. "Derivation of induction motor models from standstill frequency response tests," Report GS-6250, Elec. Pwr. Res. Inst., July 1991.
16. J. O. Ojo, V. Ostovic, T. A. Lipo, and J. C. White, "Measurement and computation of starting torque pulsations of salient pole synchronous motors," IEEE Trans. Energy Conv., vol. 5, issue 1, pp. 176-182, March 1990.
17. J. Hsu and B. P. Scoggins, "Field test of motor efficiency and load changes through air-gap torque," IEEE Trans. Energy Conv., vol. 10, no. 3, pp. 477-483, Sept. 1995.
18. K. Ikuanobe and T. Wilke, "Guildlines for implementing an energy-efficient motor retrofit program," working paper.
19. E. J. Wiedenbrüg, A. K. Wallace, "Induction machine speed extraction by analysis of stator current signatures," in Electric Manufacturing Conf. Rec., Oct. 1998.
20. L. Ben-Brahim and A. Kawamura, "A fully digitized field-oriented controlled induction motor drive using only current sensors," IEEE Trans. Ind. Electron., vol. 39, no. 3, pp. 241-249, June 1992.
21. P. L. Jansen and R. D. Lorenz, "Accuracy limitations of velocity and flux estimation in direct field oriented induction machines," in Euro. Power Electron. Conf. Rec., vol. 4, pp. 312-318, Sept. 1993.
22. M. Ishida and K. Iwata, "Steady-state characteristics of a orque and speed control system of an induction motor utilizing rotor slot harmonics for slip frequency sensing," IEEE Trans. Power Electron., vol. PE-2, no. 3, pp. 257-263, July 1987.
23. B. Hämmerli, R. Tanner, and R. Zwicky, "A rotor speed detector for induction machines utilizing rotor slot harmonics and an active three-phase injection," in 2nd Euro. Conf. Power Electron. Appl. Conf. Rec., vol. 2, pp. 599-604, 1987.
24. R. Cuzner, R. Lorenz, and D. Novotny, "Application of nonlinear observers for rotor position detection on an induction motor using machine voltages and currents," in IEEE-IAS Annu. Meet. Conf. Rec., vol. 1, pp. 416-421, Oct. 1990.
25. B. Williams, J. Goodfellow, and T. Green, "Sensorless speed measurement of inverter driven squirrel cage induction motors," in IEEE 4th Int. Conf. Power Electron. Variable-Speed Drives Conf. Rec., pp. 297-300, July 1990.
26. A. Ferrah, K. Bradley, and G. Asher, "Sensorless speed detection of inverter fed induction motors using rotor slot harmonics and fast Fourier transform," in IEEE-PESC Conf. Rec., vol. 1, pp. 279-286, June/July 1992.
27. A. Ferrah, K. Bradley, and G. Asher, "An investigation into speed measurement of induction motor drives using rotor slot harmonics and spectral estimation techniques," in IEEE-IEMDC Conf. Rec., pp. 185-189, Sept. 1993.
28. K. D. Hurst and T. G. Habetler, "Sensorless speed measurement using current harmonic spectral estimation in induction machine drives," IEEE Trans. Power Electron., vol. 11, no. 1, Jan. 1996.
29. K. D. Hurst and T. G. Habetler, "A comparison of spectrum estimation techniques for sensorless speed detection in induction machines," IEEE Trans. Ind. Appl., vol. 33, no. 4, July/August 1997.
30. P. L. Jansen and R. D. Lorenz, "Transducerless position and velocity estimation in induction and salient ac machines," IEEE Trans. Ind. Appl., vol. 31, no. 2, March/April 1995.
31. IEEE Standard Test Code for Resistance Measurement, IEEE Std 118-1978, March 1992.
32. S. Mir, M. E. Elbuluk, and D. S. Zinger, "PI and fuzzy estimators for tuning the stator resistance in direct torque control of induction machines," IEEE Trans. Power Electron., vol. 13, no. 2, pp. 279-287, March 1998.
33. T. G. Habetler, F. Profumo, G. Griva, M. Pastorelli, and A. Bettini, "Stator resistance tuning in a stator-flux field-oriented drive using an instantaneous hybrid flux estimator," IEEE Trans. Power Electron., vol. 13, no. 1, pp. 125-133, Jan. 1998.
34. C. B. Jacobina, J. E. C. Filho, and A. M. N. Lima, "On-line estimation of the stator resistance of induction machines based on zero sequence model," IEEE Trans. Pwr. Elec., Vol. 15, no. 2, pp. 346-353, Mar. 2000.
35. K. Minami, M. Velez-Reyes, D. Elten, G. C. Verghese, and D. Filbert, "Multi-stage speed and parameter estimation for induction machines," in IEEE-PESC Conf. Rec., pp. 596-604, June 1991.
36. H. Kubota and K. Matsuse, "Speed sensorless field-oriented control of induction motor with rotor resistance adaptation," IEEE Trans. Ind. Appl., vol.30, no. 5, pp. 1219-1224, Sept./Oct. 1994.
37. L. Zhen and L. Xu, "Sensorless field orientation control of induction machines based on a mutual MRAS scheme," IEEE Trans. Ind. Electron., vol.45, no. 5, pp. 824-831, Oct. 1998.
38. R. Beguanne and M. E. H. Benbouzid, "Induction motors thermal monitoring by means of rotor resistance identification," IEEE Trans. Energy Conversions, vol. 14, no. 3, pp. 566-570, Sept. 1999.
39. S. B. Lee, T. G. Habetler, R. G. Harley, and D. J. Gritter, "An evaluation of model-based stator resistance estimation for induction motor stator winding temperature monitoring," IEEE Trans. Energy Conversions, vol. 17, pp. 7-15, March 2002.
40. A. D. Inuwa, "Smart motor protection," Ph.D. dissertation, University of Sussex, 1992.
41. D. A. Paice, "Motor thermal protection by continuous monitoring of winding resistance," IEEE Trans. Ind. Electron. Instr., vol. IECI-27, no. 3, pp. 137-141, Aug. 1980.
42. S. B. Lee and T. G. Habetler, "An online stator winding resistance estimation technique for temperature monitoring of line-connected induction machines," IEEE Trans. Ind. Appl., vol.39, pp. 685-694, May/June 2003.