Factors influencing anisotropic sintering shrinkage in tape-cast alumina: Effect of processing variables

Journal of the American Ceramic Society

Volumn 89, Issue 10, 2006, Pages 3019-3026

  Patwardhan, J S ^a   Cannon, W Roger ^a,b  

^a RUTGERS UNIVERSITY   (United States)

^b INTEL CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANISOTROPIC SINTERING SHRINKAGE; SHRINKAGE ANISOTROPY; SOLIDS LOADING; TAPE-CAST ALUMINA;

ANISOTROPY; EMULSIONS; SHRINKAGE; SINTERING; THERMODYNAMIC PROPERTIES;

ALUMINA;

EID: 33748949079     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2006.01169.x     Document Type: Article

References (40)

1. P. Markondeya Raj, A. Odulana, and W. R. Cannon, "Anisotropic Shrinkage During Sintering of Particle-Oriented Systems Numerical Simulation and Experimental Studies," Acta Mater., 50, 559-70 (2002).
2. P. Markondeya Raj and W. Roger Cannon, "Anisotropic Shrinkage in Tape-Cast Alumina: Role of Processing Parameters and Particle Shape," J. Am. Ceram. Soc., 82 [10] 2619-25 (1999).
3. A. Zavaliangos and D. Bouvard, "Numerical Simulation of Anisotropy in Sintering Due to Prior Compaction," Int. J. Powder Metall., 36 [7] 58-65 (2000).
4. K. Uematsu, J. Kim, Z. Kato, N. Uchida, and K. Saito, "Direct Observation Method for Internal Structure of Ceramic Green Body," J. Ceram. Soc. Jpn., 98, 515-6 (1990).
5. K. Uematsu, H. Ito, Y. Zhang, and N. Uchida, "Novel Characterization Method for the Processing Ceramics by Polarized Light Microscope with Liquid Immersion Technique," Ceram. Trans. Am. Ceram. Soc., 54, 83-9 (1995).
6. K. Uematsu, "Immersion Microscopy for Detailed Characterization of Defects in Ceramic Powders and Green Bodies," Powder Technol., 88, 291-8 (1996).
7. A. Shui, N. Uchida, and K. Uematsu, "Origin of Shrinkage Anisotropy During Sintering for Uniaxially Pressed Alumina Compacts," Powder Technol., 127. 9-18 (2002).
8. A. Shui, M. Saito, N. Uchida, and K. Uematsu, "Development of Anisotropic Microstructures in Uniaxially Pressed Alumina Compacts," J. Eur. Ceriam. Soc., 22, 1217-33 (2002).
9. A. Shui, Z. Kato, S. Tanaka, N. Uchida, and K. Uematsu, "Sintering Deformation Caused by Particle Orientation in Uniaxially and Isostatically Pressed Alumina Compacts." J. Eur. Ceram. Soc., 22, 311-6 (2002).
10. T. Zhang, J. R. G. Evans, and M. J. Bevis, "The Control of Fiber Orientation in Ceramic and Metal Composites by Open-Ended Injection Molding," Compos. Sci. Technol., 56, 921-8 (1996).
11. T. Zhang, J. R. G. Evans, and M. J. Bevis, "Control of Orientation in Short Fiber-Reinforced Metal Matrix Composites," Int. J. Powder Metall., 32, 331-9 (1996).
12. R. W. Cox and W. O. Williamson, "Differential Shrinkage of Clays and Bodies Caused by Particle Orientation and its Significance in Testing Procedure," Trans. Br. Ceram. Soc., 57, 85-101 (1958).
13. S. J. Stedman, J. R. G. Evans, R. J. Brook, and M. J. Hoffman, "Anisotropic Sintering Shrinkage in Injection Molded Composite Ceramics," J. Eur. Ceram. Soc., 11, 523-2 (1993).
14. T. Zhang. S. Blackburn, and J. Brigwater, "The Orientation of Binders and Particles During Ceramic Injection Molding," J. Eur. Ceram. Soc., 17, 101-8 (1997).
15. T. Zhang, S. Blackburn, and J. Brigwater, "Debinding and Sintering Defects from Particle Orientation in Ceramic Injection Molding," J. Mater. Sci., 31, 5891-6 (1996).
16. K. Uematsu, H. Ito, S. Ohsaka, H. Takahashi, N. Shinohara, and M. Okumiya, "Characterization of Particle Packing in an Injection Molded Green Body," J. Am. Ceram. Soc., 78, 3107-9 (1995).
17. K. Uematsu, S. Ohsaka, H. Takahashi, N. Shinohara, M. Okmniya, Y. Yokota, K. Tamiya, S. Takahashi, and T. Ohira, "Characterization of Micro- and Macrostructure of Injection-Molded Green Body by Liquid Immersion Method," J. Eur. Ceram. Soc., 17, 177-81 (1996).
18. S. Krug, J. R. G. Evans, and J. H. H. ter Maat, "Differential Sintering in Ceramic Injection Molding: Particle Orientation Effects," J. Eur. Ceram. Soc., 22, 173-81 (2002).
19. R. Greenwood, E. Roncari, and C. Galassi, "Preparation of Concentrated Aqueous Alumina Suspensions for Tape Casting," J. Eur. Ceram. Soc., 17, 1393-401 (1997).
20. A. Kristoffersson, E. Roncari, and C. Galassi, "Comparison of Different Binders for Water-Based Tape Casting of Alumina," J. Eur. Ceram. Soc., 18, 2123-31 (1998).
21. A. Kristoffersson, E. Roncari, R. Carlsson, and C. Galassi, "Anisotropic Sintering Shrinkage of Tape-Cast Alumina,"; pp. 435-42 in 9th Cimtec- World Ceramics Congress, Ceramics - Getting into the 2000's - Part B, Edited by P Vincenzini. Techna Srl, 1999.
22. B. Bitterlich and J. G. Heinrich, "Aqueous Tape Casting of Silicon Nitride," J. Eur. Ceram. Soc., 22, 2427-34 (2002).
23. P. Markondeya Raj, F. Cosandey, and W. Roger Cannon, "Texture Determination of Ceramic Materials by EBSD" Proceedings, Annual Meeting of the Microscopy Society of America and Microbeam Analysis Society, August 1999.
24. T. Suwannasiri, "High Solids Loading for Water-Based Tape Casting," Ph.D. Thesis, Rutgers University, October 1997.
25. S. Lakhwani, "Stabilization Mechanisms and Fast Drying of High Solids Water-Based Tapes," Ph.D. Thesis, Rutgers University, 2000.
26. V. Karbhari and R. Pitchumani, "Generalized Fluid Flow Model for Ceramic Tape Casting," J. Am. Ceram. Soc., 78 [9] 2497-503 (1995).
27. G. Terrones, P. Smith, T. R. Armstrong, and T. Soltesz, "Application of Carreau Model to Tape Casting Fluid Mechanics," J. Am. Ceram. Soc., 80 [12] 3151-6 (1997).
28. S. Joshi, Y. C. Lam, F. Y. C. Boey, and A. I. Y. Tok, "Power Law Fluids and Bingham Plastics Flow Models for Ceramic Casting," J. Mater. Process Technol., 120, 215-25 (2002).
29. S. M. Nycz, S. C. DeBockler, and R. A. Haber, "Controlling Microstructural Anisotropy During Forming," Ceram. Eng. Sci. Proc., 26 [8] 45-52 (2005).
30. P. Markondeya Raj, S. M. Dunn, and W. Roger Cannon, "Edge Sharpening for Unbiased Edge Detection in Filed Emission Scanning Electron Microscope Images," Microsc. Microanal., 5, 136-46 (1999).
31. L. Bergstrom, "Shear Thinning and Shear Thickening of Concentrated Ceramic Suspensions," Colloid. Surface A: Physicochem. Eng. Aspects, 133, 151-5 (1998).
32. J. L. Reed and E. Tryggvason, "Preferred Orientation of Rigid Particles in Dilute Matrix Deformed by Pure Shear and Simple Shear," Tectonnphysics, 24 [1] 29-33 (1974).
33. A. Bocker, H. O. Brokmeier, and H. J. Bunge, "Determination of Preferred Orientation Textures in A1203 Ceramics," J. Eur: Carom. Soc., 8, 187-94 (1991).
34. A. Bocker, H. J. Bunge, J. Huber, and W. Krahn, "Texture Formation in AljOj Substrates," J. Eur. Ceram. Soc., 14, 283-93 (1994).
35. D. S. Bhattacharyya, "Orientation of Mineral Lineation along the Flow Direction in Rocks," Techtonophysics, 3 [1] 29-33 (1966).
36. E. P. McNamara and J. E. Comeforo, "Classification of Natural Organic Binders," J. Am. Ceram. Sac., 28 [1] 25-31 (1945).
37. K. Hagen, "Using Infrared Radiation to Dry Coatings," TAPPI J, 72 [5] 77-83 (1989).
38. A. Zavaliangos, J. M. Missiaen, D. Bouvard, and C. P. Carry, "Crystallographic Texture as Potential Origin of Anisotropy in Sintering in Magnetic Materials Sintering 2003," Pennsylvania Stale University. September 2003.
39. K. Uematsu, "Crystallographic Origin for Anisotropic Sintering in Alumina Compact Sintering 2003," Pennsylvania State University, September 2003.
40. P. Markondeya Raj and W. Roger Cannon, "2-D Particle Shape Averaging and Comparison Using Fourier Descriptors," Powder Technol., 104, 180-9 (1999).