Laboratory assessment of wear on nitrided surfaces of dies for hot extrusion of aluminium

Tribology International

Volumn 40, Issue 2 SPEC. ISS., 2007, Pages 374-384

  Tercelj M ^a   Smolej, A ^a   Fajfar, P ^a   Turk, R ^a  

^a UNIVERSITY OF LJUBLJANA   (Slovenia)

Author keywords

AISI H13; Aluminium hot extrusion; Compound layer; Die wear testing; Nitrided microstuctures

Indexed keywords

ALUMINUM; EXTRUSION; MICROSTRUCTURE; NITRIDING; SCANNING ELECTRON MICROSCOPY; WEAR OF MATERIALS;

COMPOUND LAYERS; DIE WEAR TESTING; HOT EXTRUSION; NITRIDED MICROSTUCTURES;

SURFACE PROPERTIES;

EID: 33748926713     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2005.09.032     Document Type: Article

References (39)

1. Tverlid S. Modeling of friction in the bearing chanel of dies for extrusion of aluminium sections. Dissertation thesis, 147, Norwegian University of Machine Design and Materials Technology, Trondheim, 1997.
2. Schruff I., Schindler A., and Kortmann A. Die sachgerechte Prüfung und Wärmebehandlung von Warmarbeitsstählen. Härterei Tech Mitt 53 3 (1998) 139-146
3. Steiner J. Plasmanitrieren von Aluminium-Strangpresswerkzeugen. Elektrowärme Int 52 B3 (1994) 139-141
4. Björk T., Bergström J., and Hogmark S. Tribological simulation of aluminium hot extrusion. Wear 224 (1999) 216-225
5. Shepard T., Nisarataporn E., and McShane H.B. Material flow and pressure prediction when extruding through bridge dies. Z Metallkd 89 5 (1998) 327-337
6. Mori T., Takatsuji N., Matsuki K., Aida T., Murotani K., and Uetoko K. Measurement of pressure distribution on die surface and deformation of extrusion die in hot extrusion of 1050 aluminium rod. J Mater Process Technol 130-131 (2002) 421-425
7. Terčelj M., Kugler G., Turk R., Cvahte P., and Fajfar P. Measurement of temperature on bearing surface of industrial die and assessment of heat transfer coefficient in aluminium hot extrusion-a case study. Int J Vehicle Des 39 1-2 (2005) 93-109
8. Beynon J.H. Tribology in hot metal forming. Tribol Int 31 (1998) 73-79
9. Björk T., Westergård R., Hogmark S., Bergström J., and Hedenquist P. Physical vapour deposition duplex coatings for aluminium extrusion dies. Wear 225-229 (1999) 1123-1130
10. Welo T, Abtahi S, Skauvik I. An experimental and numerical investigation of thermo-mechanical conditions on the bearing surface of extrusions dies. In: Sixth international aluminium extrusion technology seminar, vol. 2; 1996. p. 101-8.
11. Abtahi S, Welo S, Stoeren S. Interface mechanisms on the bearing surface in extrusion. In: Sixth international aluminium extrusion technology seminar, vol. 2; 1996. p. 125-31.
12. Clode M.P., and Shepard T. Formation of die lines during extrusion of AA 6063. Mater Sci Technol 6 (1990) 755-763
13. Björk T., Berger M., Westergård R., Hogmark S., and Bergström J. New physical vapour deposition coatings applied to extrusion dies. Surf Coat Technol 146-147 (2001) 33-41
14. Panjan P., Cvahte P., Čekada M., Navinšek B., and Urankar I. PVD CrN coating for protection of extrusion dies. Vacuum 61 (2001) 241-244
15. Zhou J., and Duszczyk J. Prevention of stick-slip tearing of Duralcan AA6061-matrix composite during extrusion. J Mater Sci Lett 17 (1998) 617-1619
16. Müller K.B. Deposition of hard films on hot-working steel dies for aluminium. J Mater Process Technol 130-131 (2002) 432-437
17. Cooke K.E., Yang S., Seluck C., Kennedy A., Teer D.G., and Beale D. Developed of duplex nitrided and closed unbalanced magnetron sputter ion plated CrTiAlN-based coatings for H13 aluminium extrusion dies. Surf Coat Technol 188-189 (2004) 697-702
18. Klimek K.S., Ahn H., Seebach I., Wang M., and Rie K.T. Duplex process applied for die casting and forging tools. Surf Coat Technol 174-175 (2004) 677-680
19. Björk T., Westegård R., and Hogmark S. Wear of surface treated dies for aluminium extrusion-a case stadij. Wear 249 (2001) 316-323
20. Björk T, Bergström J, Hogmark S. Optimitization of nitriding parameters for extrusion dies, evaluated in an extrusion simulation test. In: Seventh international aluminium extrusion technology seminar, vol. 2; 2000. p. 317-25.
21. Kang J.H., Park I.W., Jae J.S., and Kang S.S. A studij on a die wear model considering thermal softening: (I) construction of the wear model. J Mater Process Technol 96 (1999) 53-58
22. Yang Y.Y., Fang H.S., and Huang W.G. A study on wear resistance of the white layer. Tribol Int 29 (1996) 425-428
23. Keramis M.B., and Gercekcioglu E. Wear behaviour of plasma nitrided steels at ambient and at elevated temperature. Wear 243 (2000) 76-84
24. Psyllaki P., Kefalonikas G., Pantazopoulos G., Antoniou S., and Sideris J. Microstructure and tribological behaviour of liquid nitrocarburised tool steels. Surf Coat Technol 162 (2002) 67-78
25. Straffelini G., Avi G., and Pellizari M. Effect of three nitriding treatments on tribological prerformance of 42CrAlMo7 steel in boundary lubrication. Wear 252 (2002) 870-879
26. Walkowicz J., Smolik J., and Tacikowski J. Optimitization of nitrided case structure in composite layers created by duplex treatment on the basis of PVD coating adhesion measurement. Surf Coat Technol 116-119 (1999) 370-379
27. Smolik J., Walkowicz J., and Tacikowski J. Influence of the structure of the composite: nitrided layer/PVD coating on the durability of tools for hot working. Surf Coat Technol 125 (2000) 2000
28. Jeong B.Y., and Kim M.H. Effects of the process parameters on the layer formation behaviour of plasma nitrided steels. Surf Coat Technol 141 (2001) 182-186
29. Friehling P.F., Poulsen F.W., and Somers M.A.J. Nucleation of iron nitrides during gaseous nitriding of iron; effect of a preoxididation treatment. Z Metallkd 92 6 (2001) 589-595
30. Ma S., Li Y., and Xu K. The composite of nitrided steel of H13 and TiN coatings by plasma duplex treatment and the effect of pre-nitriding. Surf Coat Technol 137 (2001) 116-121
31. Fancey K.S., Leyland A., Egerton D., Torres D., and Mattthews A. The influence of process gas characteristics on the properties of plasma nitrided steel. Surf Coat Technol 76-77 (1995) 694-699
32. Miola E.J., de Souza S.D., and Olzon-Dionysio M. Systematic study on influence of the nitriding parameters on pure iron superficial layer properties. Surf Coat Technol 167 (2003) 33-40
33. Baranowska J., and Wysiecki M. Influence of surface pretreatment on case formation during gaseous nitriding. Surf Coat Technol 125 (2000) 30-34
34. Krishnaraj N., Bala Srinivasan P., Iyer L.J.L., and Sundaresan S. Optimitization of compound layer thickness for wear resistance of nitrocarburized H11 steel. Wear 215 (1998) 123-130
35. Alsaran A., Celik A., and Celik C. Determination of the optimum conditions for ion nitriding of AISI 5140 steel. Surf Coat Technol 160 (2002) 219-226
36. Mills B., and Redford A.H. Wear testing of die materials rubbing against aluminium and copper. Ann CIRP 28 1 (1979) 165-169
37. Kawamura S, Haruyama Y, Yokoi N, Kimura Y, Shiozawa K. Tribological properties of duplex surface treated hot work die steel sliding against aluminium alloy. In: Brebbia CA, Kenny J, editors. SUFACE TREATMENT IV; 1999. p. 13-22, ISBN: 1-85312-697-7.
38. Schmitt M., and Paulmier D. Tribological behaviour of diamond coatings sliding against Al alloys. Tribol Int 37 (2004) 317-325
39. Terčelj M., Turk R., and Knap M. Assessment of temperature on die surface in laboratory hot forming. Appl Therm Eng 23 (2003) 113-123