The relation between micromotion and screw fixation in acetabular cup

Computer Methods and Programs in Biomedicine

Volumn 84, Issue 1, 2006, Pages 34-41

  Hsu, Jui Ting ^a   Lai, Kuo An ^b   Chen, Qingshan ^c   Zobitz, Mark E ^c   Huang, Heng Li ^a   An, Kai Nan ^c   Chang, Chih Han ^a  

^a NATIONAL CHENG KUNG UNIVERSITY   (Taiwan)

^b NATIONAL CHENG KUNG UNIVERSITY HOSPITAL   (Taiwan)

^c Mayo Clinic   (United States)

Author keywords

Acetabular cup; Finite element methods; Initial stability; Screw fixation

Indexed keywords

ACETABULAR CUP; INITIAL STABILITY; SCREW FIXATION;

BIOMEDICAL ENGINEERING; BONE CEMENT; COMPUTER SIMULATION; FINITE ELEMENT METHOD; GAIT ANALYSIS; IMPLANTS (SURGICAL);

FRACTURE FIXATION;

ACETABULUM; ARTICLE; BONE SCREW; ENDOPROSTHESIS; FINITE ELEMENT ANALYSIS; HIP PROSTHESIS; JOINT MOBILITY; JOINT STABILITY; MECHANICAL STRESS; MOTION; PELVIS; PROSTHESIS LOOSENING; SIMULATION;

ACETABULUM; ARTHROPLASTY, REPLACEMENT, HIP; EQUIPMENT AND SUPPLIES; HUMANS; MOTION;

EID: 33748807200     PISSN: 01692607     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cmpb.2006.08.002     Document Type: Article

References (30)

1. Capello W.N., D'Antonio J.A., Manley M.T., and Feinberg J.R. Hydroxyapatite in total hip arthroplasty. Clinical results and critical issues. Clin. Orthop. Relat. Res. 355 (1998) 200-211
2. Lai K.A., Shen W.J., Chen C.H., Yang C.Y., Hu W.P., and Chang G.L. Failure of hydroxyapatite-coated acetabular cups. Ten-year follow-up of 85 Landos Atoll arthroplasties. J. Bone Joint Surg. Br. 5 (2002) 641-646
3. Pilliar R.M., Lee J.M., and Maniatopoulos C. Observations on the effect of movement on bone ingrowth into porous-surfaced implants. Clin. Orthop. Relat. Res. 208 (1986) 108-113
4. Huiskes R. Failed innovation in total hip replacement. Diagnosis and proposals for a cure. Acta Orthop. Scand. 6 (1993) 699-716
5. Ramamurti B.S., Orr T.E., Bragdon C.R., Lowenstein J.D., Jasty M., and Harris W.H. Factors influencing stability at the interface between a porous surface and cancellous bone: a finite element analysis of a canine in vivo micromotion experiment. J. Biomed. Mater. Res. 2 (1997) 274-280
6. Szmukler-Moncler S., Salama H., Reingewirtz Y., and Dubruille J.H. Timing of loading and effect of micromotion on bone-dental implant interface: review of experimental literature. J. Biomed. Mater. Res. 2 (1998) 192-203
7. Litsky A.S., and Pophal S.G. Initial mechanical stability of acetabular prostheses. Orthopedics 1 (1994) 53-57
8. Illgen II R., and Rubash H.E. The optimal fixation of the cementless acetabular component in primary total hip arthroplasty. J. Am. Acad. Orthop. Surg. 1 (2002) 43-56
9. Morscher E.W. Current status of acetabular fixation in primary total hip arthroplasty. Clin. Orthop. Relat. Res. 274 (1992) 172-193
10. Ries M.D., Salehi A., and Shea J. Photoelastic analysis of stresses produced by different acetabular cups. Clin. Orthop. Relat. Res. 369 (1999) 165-174
11. Adler E., Stuchin S.A., and Kummer F.J. Stability of press-fit acetabular cups. J. Arthroplast. 3 (1992) 295-301
12. Curtis M.J., Jinnah R.H., Wilson V.D., and Hungerford D.S. The initial stability of uncemented acetabular components. J. Bone Joint Surg. Br. 3 (1992) 372-376
13. Won C.H., Hearn T.C., and Tile M. Micromotion of cementless hemispherical acetabular components. Does press-fit need adjunctive screw fixation?. J. Bone Joint Surg. Br. 3 (1995) 484-489
14. MacKenzie J.R., Callaghan J.J., Pedersen D.R., and Brown T.D. Areas of contact and extent of gaps with implantation of oversized acetabular components in total hip arthroplasty. Clin. Orthop. Relat. Res. 298 (1994) 127-136
15. Kim Y.S., Callaghan J.J., Ahn P.B., and Brown T.D. Fracture of the acetabulum during insertion of an oversized hemispherical component. J. Bone Joint Surg. Am. 1 (1995) 111-117
16. Sharkey P.F., Hozack W.J., Callaghan J.J., Kim Y.S., Berry D.J., Hanssen A.D., and LeWallen D.G. Acetabular fracture associated with cementless acetabular component insertion: a report of 13 cases. J. Arthroplast. 4 (1999) 426-431
17. Lachiewicz P.F., Suh P.B., and Gilbert J.A. In vitro initial fixation of porous-coated acetabular total hip components. A biomechanical comparative study. J. Arthroplast. 3 (1989) 201-205
18. Hadjari M.H., Hollis J.M., Hofmann O.E., Flahiff C.M., and Nelson C.L. Initial stability of porous coated acetabular implants. The effect of screw placement, screw tightness, defect type, and oversize implants. Clin. Orthop. Relat. Res. 307 (1994) 117-123
19. Kwong L.M., O'Connor D.O., Sedlacek R.C., Krushell R.J., Maloney W.J., and Harris W.H. A quantitative in vitro assessment of fit and screw fixation on the stability of a cementless hemispherical acetabular component. J. Arthroplast. 2 (1994) 163-170
20. Chen W.P., Hsu J.T., and Chang C.H. Determination of Young's modulus of cortical bone directly from computed tomography: a rabbit model. J. Chin. Inst. Eng. 6 (2003) 737-745
21. Huang H.L., Huang J.S., Ko C.C., Hsu J.T., Chang C.H., and Chen M.Y. Effects of splinted prosthesis supported a wide implant or two implants: a three-dimensional finite element analysis. Clin. Oral. Implants Res. 4 (2005) 466-472
22. Spears I.R., Pfleiderer M., Schneider E., Hille E., and Morlock M.M. The effect of interfacial parameters on cup-bone relative micromotions. A finite element investigation. J. Biomech. 1 (2001) 113-120
23. Schuller H.M., Dalstra M., Huiskes R., and Marti R.K. Total hip reconstruction in acetabular dysplasia. A finite element study. J. Bone Joint. Surg. Br. 3 (1993) 468-474
24. Yew A., Jagatia M., Ensaff H., and Jin Z.M. Analysis of contact mechanics in McKee-farrar metal-on-metal hip implants. Proc. Inst. Mech. Eng. [H] 5 (2003) 333-340
25. Shirazi-Adl A., Dammak M., and Paiement G. Experimental determination of friction characteristics at the trabecular bone/porous-coated metal interface in cementless implants. J. Biomed. Mater. Res. 2 (1993) 167-175
26. Bergmann G., Deuretzbacher G., Heller M., Graichen F., Rohlmann A., Strauss J., and Duda G.N. Hip contact forces and gait patterns from routine activities. J. Biomech. 7 (2001) 859-871
27. Heiner J.P., Manley P., Kohles S., Ulm M., Bogart L., and Vanderby Jr. R. Ingrowth reduces implant-to-bone relative displacements in canine acetabular prostheses. J. Orthop. Res. 5 (1994) 657-664
28. Pidhorz L.E., Urban R.M., Jacobs J.J., Sumner D.R., and Galante J.O. A quantitative study of bone and soft tissues in cementless porous-coated acetabular components retrieved at autopsy. J. Arthroplast. 2 (1993) 213-225
29. Wasielewski R.C., Cooperstein L.A., Kruger M.P., and Rubash H.E. Acetabular anatomy and the transacetabular fixation of screws in total hip arthroplasty. J. Bone Joint Surg. Am. 4 (1990) 501-508
30. Chen S.I., Lin R.M., and Chang C.H. Biomechanical investigation of pedicle screw-vertebrae complex: a finite element approach using bonded and contact interface conditions. Med. Eng. Phys. 4 (2003) 275-282