Environmental effects on epoxy adhesives employed for restoration of historical buildings

Journal of Materials in Civil Engineering

Volumn 18, Issue 5, 2006, Pages 715-722

  Frigione, Maria Enrica ^a   Lettieri, M ^b   Mecchi, A M ^c  

^a UNIVERSITY OF SALENTO   (Italy)

^b CNR Consiglio Nazionale delle Ricerche   (Italy)

^c Istituto per la Conservazione e la Valorizzazione dei Beni Culturali Sesto Fiorentino   (Italy)

Author keywords

Aging; Durability; Environmental issues; Epoxy resins; Restoration; Weathering

Indexed keywords

ADHESIVES; BUILDINGS; CURING; DURABILITY; ENVIRONMENTAL IMPACT; EPOXY RESINS; GLASS TRANSITION; HEAT TREATMENT; MECHANICAL PROPERTIES; NONMETALLIC MATRIX COMPOSITES; RESTORATION; THERMODYNAMIC PROPERTIES;

CHEMICAL PROPERTIES; EPOXY ADHESIVES; FIBER-REINFORCED COMPOSITES; HISTORICAL BUILDINGS;

FIBER REINFORCED MATERIALS;

BUILDING; COMPOSITE; CONSTRUCTION MATERIAL; DURABILITY; ENVIRONMENTAL EFFECT; ENVIRONMENTAL ISSUE; ENVIRONMENTAL RESTORATION; MECHANICAL PROPERTY;

EURASIA; EUROPE; ITALY; SOUTHERN EUROPE;

EID: 33748772262     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0899-1561(2006)18:5(715)     Document Type: Conference Paper

References (38)

1. ASTM. (1992). "Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials." ASTM D 790-92, Philadelphia.ASTM. (1992). "Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials." ASTM D 790-92, Philadelphia.
2. Balsamo, A., Battista, U., Herzalla, A., and Viskovic, A. (2001). "The use of aramidic fibers to improve the structural behavior of masonry structures under seismic actions." Proc., UNESCO-ICOMOS Int. Congress on Architecture.
3. Berens, A. R., and Hodge, I. M. (1982). "Effects of annealing and prior history on enthalpy relaxation in glassy polymers. I: Experimental study on poly(vinyl chloride)." MacromoleculesMAMOBX0024-929710.1021/ma00231a016, 15(3), 756-761.
4. Capponi, G., D'Angelo, C., Santamaria, U., Massa, S., Omarini, S., and Filacchioni, G. (1999). "I materiali compositi fibrorinforzati per il consolidamento delle volte della Basilica Superiore di San Francesco. Verifica delle caratteristiche chimiche, chimico-fisiche, fisico-meccaniche e della durabilitá." Quaderno No. 8, La Basilica di S. Francesco in Assisi, Istituto Centrale per il Restauro, Rome, 33-35.
5. Chin, J. W., Aouadi, K., Haight, M. R., Hughes, W. L., and Nguyen, T. (2001). "Effects of water, salt solution, and simulated concrete pore solution on the properties of composite matrix resins used in civil engineering applications." Polym. Compos.PCOMDI0272-839710.1002/ pc.10538, 22(2), 282-297.
6. Chin, J. W., Nguyen, T., and Aouadi, K. (1999). "Sorption and diffusion of water, salt water, and concrete pore solution in composite matrices." J. Appl. Polym. Sci.JAPNAB0021-899510.1002/ (SICI)1097-4628(19990118)71:3<483::AID-APP15>3.3.CO;2-J71(3), 483-492.
7. Clough, R. L., and Gillen, K. T. (1991). Irradiation effects on polymers, D. W. Clegg and A. A. Colleyer, eds., Kluwer Academic, Boston.
8. Cook, W. D., Mehrabi, M., and Edward, G. H. (1999). "Aging and yielding in model epoxy thermosets." PolymerPOLMAG0032-3861, 40(5), 1209-1218.
9. d'Almeida, J. R. M., and Monteiro, S. N. (1998). "The influence of the amount of hardener on the tensile mechanical behavior of an epoxy system." Polym. Adv. Technol.PADTE51042-7147, 9(3), 216-221.
10. Damian, C., Espuche, E., and Escoubes, M. (2001). "Influence of three aging types (thermal oxidation, radiochemical, and hydrolytic aging) on the structure and gas transport properties of epoxy-amine networks." Polym. Degrad. Stab.PDSTDW0141-3910, 72(3), 447-458.
11. Ellis, B. (1993). Chemistry and technology of epoxy resins, B. Ellis, ed., Blackie Academic Professional, New York, 72-116.
12. Ellis, B., Found, M. S., and Bell, J. R. (1996). "Effects of cure treatment on glass transition temperatures for a BADGE-DDM epoxy resin." J. Appl. Polym. Sci.JAPNAB0021-8995, 59(10), 1493-1505.
13. Fernández-García, M., and Chiang, M. Y. M. (2002). "Effect of hygrothermal aging history on sorption process, swelling, and glass transition temperature in a particle-filled epoxy-based adhesive." J. Appl. Polym. Sci.JAPNAB0021-8995, 84(8), 1581-1591.
14. Fraga, F., Burgo, S., and Rodriguez-Núnẽz, E. (2001). "Curing kinetic of the epoxy system BADGE n=0/1,2 DCH by Fourier transform infrared spectroscopy." J. Appl. Polym. Sci.JAPNAB0021-8995, 82(13), 3366-3372.
15. Fraga, F., Castro-Diaz, C., Rodriguez-Núnẽz, E., and Martinez-Ageitos, J. M. (2003). "Physical aging for an epoxy network diglycidyl ether of bisphenol A/m-xylylenediamine." PolymerPOLMAG0032-3861, 44(19), 5779-5784.
16. Frigione, M., Maffezzoli, A., and Luprano, V. A. M. (2001). "Correlation between ultrasonic and static mechanical properties during curing of cold-curing epoxy adhesives." J. Polym. Eng.JPOEEK0334-6447, 21(5), 445-468.
17. Frigione, M. (2004). "The transport of water and its effects on properties on cold-curing epoxy adhesives." Homolytic and heterolytic reactions. Problems and solutions, G. E. Zaikov, Yu. B. Monakov, and A. Jimenez, eds., Nova Science, New York, 283-305.
18. Gupta, V. B., Drzal, L. T., Lee, C.Y.-C., and Rich, M. J. (1985). "The temperature-dependence of some mechanical properties of a cured epoxy resin system." J. Polym. Eng.JPOEEK0334-6447, 25(13), 812-823.
19. Hodge, I. M. (1983). "Effects of annealing and prior history on enthalpy relaxation in glassy polymers. IV: Comparison of five polymers." MacromoleculesMAMOBX0024-929710.1021/ma00240a013, 16(6), 898-902.
20. Ivanova, K. I., Pethrick, R. A., and Affrossman, S. (2000). "Investigation of hydrothermal aging of a filled rubber toughened epoxy resin using dynamic mechanical thermal analysis and dielectric spectroscopy." PolymerPOLMAG0032-3861, 41(18), 6787-6796.
21. Kajorncheappunngam, S., Gupta, R. K., and GangaRao, H. V. S. (2002). "Effect of aging environment on degradation of glass-reinforced epoxy." J. Compos. Constr.JCCOF21090-026810.1061/ (ASCE)1090-0268(2002)6:1(61), 6(1), 61-69.
22. Karbhari, V. M., (2003). "Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure." J. Compos. Constr.JCCOF21090-026810.1061/(ASCE)1090-0268(2003)7:3(238), 7(3), 238-247.
23. Kong, E.S.-W. (1981). "Sub-Tg annealing studies of advanced epoxy-matrix graphite-fiber-reinforced composites." J. Appl. Phys.JAPIAU0021-897910.1063/1.329832, 52(10), 5921-5925.
24. Lapique, F., and Redford, K. (2002). "Curing effects on viscosity and mechanical properties of a commercial epoxy resin adhesive." Int. J. Adhes. Adhes.IJAADK0143-7496, 22(4), 337-346.
25. Lee, J. K., Hwang, J. Y., and Gillham, J. K. (2001). "Erasure below glass-transition temperature of effect of isothermal physical aging in fully cured epoxy/amine thermosetting system." J. Appl. Polym. Sci.JAPNAB0021-8995, 81(2), 396-404.
26. Meyer, F., Sanz, G., Eceiza, A., Mondragon, I., and Mijovic, J. (1995). "The effect of stoichiometry and thermal history during cure on structure and properties of epoxy networks." PolymerPOLMAG0032-3861, 36(7), 1407-6414.
27. Morgan, R. J. (1979). "The effect of thermal history and strain rate on the mechanical properties of diethylenetriamine-cured bisphenol-A-diglycidyl ether epoxies." J. Appl. Polym. Sci.JAPNAB0021-8995, 23(9), 2711-2717.
28. Musto, P., Martuscelli, E., Ragosta, G., Russo, P., and Villano, P. (1999). "Tetrafunctional epoxy resins: Modeling the curing kinetics based on FTIR spectroscopy data." J. Appl. Polym. Sci.JAPNAB0021-8995, 74(3), 532-540.
29. Nichols, M. E., Wang, S. S., and Geil, P. H. (1990). "Creep and physical aging in polyamideimide carbon fiber composite." J. Macromol. Sci., Phys.JMAPBR0022-2348, 29(4), 303-336.
30. Nogueira, P., Ramírez, C., Torres, A., Abad, M. J., Cano, J., López, J., López-Bueno, I., and Barral, L. (2001). "Effect of water sorption on the structure and mechanical properties of an epoxy resin system." J. Appl. Polym. Sci.JAPNAB0021-8995, 80(1), 71-80.
31. Rajagopalan, G., Immordino, K. M., Gillespie, J. W., Jr., and McKnight, S. H. (2000). "Diffusion and reaction of epoxy and amine in polysolfone studied using Fourier transform infrared spectroscopy: Experimental results." PolymerPOLMAG0032-3861, 41(7), 2591-2602.
32. Simon, S. L., Mckenna, G. B., and Sindt, O. (2000). "Modeling the evo-lution of the dynamic mechanical properties of a commercial epoxy during cure after gelation." J. Appl. Polym. Sci.JAPNAB0021-899510.1002/ (SICI)1097-4628(20000425)76:4<495::AID-APP7>3.0.CO;2-B 76(4), 495-508.
33. Struik, L. C. E. (1978). Physical aging in amorphous polymers and other materials, Elsevier Scientific, New York.
34. Tu, L., and Kruger, D. (1996). "Engineering properties of epoxy resins used as concrete adhesives." ACI Mater. J.AMAJEF0889-325X, 93(1), 26-35.
35. White, J. R., and Turnbull, A. (1994). "Weathering of polymers-Mechanisms of degradation and stabilization testing strategies and modeling." J. Mater. Sci.JMTSAS0022-246110.1007/BF00445969, 29(3), 584-613.
36. Xiao, G. Z., and Shanahan, M. E. R. (1998). "Irreversible effects of hygrothermal aging on DGEBA/DDA epoxy resin." J. Appl. Polym. Sci.JAPNAB0021-8995, 69(2), 363-369.
37. Zanni-Deffarges, M. P., and Shanahan, M. E. R. (1995). "Diffusion of water into an epoxy adhesive: Comparison between bulk behavior and adhesive joints." Int. J. Adhes. Adhes.IJAADK0143-7496, 15(3), 137-142.
38. Zhou, J., and Lucas, J. P. (1999). "Hygrothermal effects of epoxy resin. Part II: Variations of glass transition temperature." PolymerPOLMAG0032-3861, 40(20), 5513-5522.