-
1
-
-
33748783694
-
-
1970-2002 Average Annual Emissions, All Criteria Pollutants, January 2005; U.S. Government Printing Office: Washington, DC
-
U.S. Environmental Protection Agency, Technology Transfer Network Clearinghouse for Inventories & Emissions Factors; 1970-2002 Average Annual Emissions, All Criteria Pollutants, January 2005; U.S. Government Printing Office: Washington, DC, 2005.
-
(2005)
Technology Transfer Network Clearinghouse for Inventories & Emissions Factors
-
-
-
3
-
-
26444473693
-
-
SAE 2003-01-0817; The Society of Automotive Engineers: Warrendale, PA
-
Kidokoro, T.; Hoshi, K.; Hiraku, K.; Satoya, K.; Watanabe, T.; Fujiwara, T.; Suzuki H. Development of PZEV Exhaust Emission Control System, SAE 2003-01-0817; The Society of Automotive Engineers: Warrendale, PA, 2003.
-
(2003)
Development of PZEV Exhaust Emission Control System
-
-
Kidokoro, T.1
Hoshi, K.2
Hiraku, K.3
Satoya, K.4
Watanabe, T.5
Fujiwara, T.6
Suzuki, H.7
-
6
-
-
2342606922
-
-
Academic Dissertation, Department of Process and Environmental Engineering, University of Oulu, Finland
-
Lassi, U. Deactivation Correlations of Pd/Rh Three-way Catalysts Designed for Euro IV Emission Limits: Effect of Ageing Atmosphere, Temperature and Time, Academic Dissertation, Department of Process and Environmental Engineering, University of Oulu, Finland, 2003.
-
(2003)
Deactivation Correlations of Pd/Rh Three-Way Catalysts Designed for Euro IV Emission Limits: Effect of Ageing Atmosphere, Temperature and Time
-
-
Lassi, U.1
-
7
-
-
14844359931
-
-
SAE 980937; The Society of Automotive Engineers: Warrendale, PA
-
Kishi, N.; Hashimoto, H.; Fujimori, K.; Ishii, K.; Komatsuda, T. Development of the Ultra Low Heat Capacity and Highly Insulating (ULOC) Exhaust Manifold for ULEV, SAE 980937; The Society of Automotive Engineers: Warrendale, PA, 1998.
-
(1998)
Development of the Ultra Low Heat Capacity and Highly Insulating (ULOC) Exhaust Manifold for ULEV
-
-
Kishi, N.1
Hashimoto, H.2
Fujimori, K.3
Ishii, K.4
Komatsuda, T.5
-
8
-
-
0035384758
-
Liquid fuel impingement on in-cylinder surfaces as a source of hydrocarbon emissions from direct injection gasoline engines"
-
Li, J.; Huang, Y.; Alger, T. F.; Matthews, R. D.; Hall, M. J.; Stanglmaier, R. H.; Roberts, C. E.; Dai, W.; Anderson R. W. Liquid fuel impingement on in-cylinder surfaces as a source of hydrocarbon emissions from direct injection gasoline engines", J. Eng. Gas Turbines Power, 1999, I23, 3, 659-668.
-
(1999)
J. Eng. Gas Turbines Power
, vol.I23
, Issue.3
, pp. 659-668
-
-
Li, J.1
Huang, Y.2
Alger, T.F.3
Matthews, R.D.4
Hall, M.J.5
Stanglmaier, R.H.6
Roberts, C.E.7
Dai, W.8
Anderson, R.W.9
-
9
-
-
0242569950
-
-
SAE 1999-01-0792; The Society of Automotive Engineers, Warrendale, PA
-
Zimmermann, F.; Ren, W. M.; Bright, J.; Imoehl, B. An Internally Heated Tip Injector to Reduce H. C.; Emissions During Cold Start, SAE 1999-01-0792; The Society of Automotive Engineers, Warrendale, PA, 1999.
-
(1999)
An Internally Heated Tip Injector to Reduce H. C.; Emissions during Cold Start
-
-
Zimmermann, F.1
Ren, W.M.2
Bright, J.3
Imoehl, B.4
-
10
-
-
0242569990
-
-
SAE 952479; The Society of Automotive Engineers, Warrendale, PA
-
Hilbert, H. S.; Boggs, D. L.; Schechter, M. M. The Effects of Small Fuel Droplets on Cold Engine Emissions Using Ford's Air Forced Injection System, SAE 952479; The Society of Automotive Engineers, Warrendale, PA, 1995.
-
(1995)
The Effects of Small Fuel Droplets on Cold Engine Emissions Using Ford's Air Forced Injection System
-
-
Hilbert, H.S.1
Boggs, D.L.2
Schechter, M.M.3
-
11
-
-
0242654431
-
-
SAE 952482; The Society of Automotive Engineers, Warrendale, PA
-
Fulcher, S. K.; Gajdeczko, B. F.; Felton, P. G.; Bracco, F. V. The Effects of Fuel Atomization, Vaporization, and Mixing on the Cold-Start UHC Emissions of a Contemporary S.I. Engine with Intake-Manifold Injection, SAE 952482; The Society of Automotive Engineers, Warrendale, PA, 1995.
-
(1995)
The Effects of Fuel Atomization, Vaporization, and Mixing on the Cold-Start UHC Emissions of a Contemporary S.I. Engine with Intake-Manifold Injection
-
-
Fulcher, S.K.1
Gajdeczko, B.F.2
Felton, P.G.3
Bracco, F.V.4
-
12
-
-
33750074583
-
-
SAE 1999-01-0772; The Society of Automotive Engineers, Warrendale, PA
-
Kishi, N.; Kikuchi, S.; Suzuki, N.; Hayashi, T. Technology for Reducing Exhaust Gas Emissions in Zero Level Emission Vehicles (ZLEV), SAE 1999-01-0772; The Society of Automotive Engineers, Warrendale, PA, 1999.
-
(1999)
Technology for Reducing Exhaust Gas Emissions in Zero Level Emission Vehicles (ZLEV)
-
-
Kishi, N.1
Kikuchi, S.2
Suzuki, N.3
Hayashi, T.4
-
13
-
-
33044507875
-
-
SAE 2003-01-0816; The Society of Automotive Engineers, Warrendale, PA
-
Oguma, H.; Koga, M.; Momoshima, S.; Nishizawa, K.; Yamamoto, S. Development of Third Generation of Gasoline P-ZEV Technology, SAE 2003-01-0816; The Society of Automotive Engineers, Warrendale, PA, 2003.
-
(2003)
Development of Third Generation of Gasoline P-ZEV Technology
-
-
Oguma, H.1
Koga, M.2
Momoshima, S.3
Nishizawa, K.4
Yamamoto, S.5
-
14
-
-
33748809603
-
-
SAE 932726; The Society of Automotive Engineers, Warrendale, PA
-
Rapp, L. A.; Benson, J. D.; Burns, V. R., Gorse, R. A., Jr.; Hochhauser, A. M.; Knepper, J. C.; Koehl, Leppard, W. R.; Painter, L. J.; Reuter, R. M.; Rutherford, J. A. Effects of Fuel Properties on Mass Exhaust Emissions During Various Modes of Vehicle Operation, SAE 932726; The Society of Automotive Engineers, Warrendale, PA, 1993.
-
(1993)
Effects of Fuel Properties on Mass Exhaust Emissions during Various Modes of Vehicle Operation
-
-
Rapp, L.A.1
Benson, J.D.2
Burns, V.R.3
Gorse Jr., R.A.4
Hochhauser, A.M.5
Knepper, J.C.6
Koehl Leppard, W.R.7
Painter, L.J.8
Reuter, R.M.9
Rutherford, J.A.10
-
16
-
-
33748797738
-
-
SAE Technical Paper 972884; The Society of Automotive Engineers, Warrendale, PA, 1997
-
Stanglmaier, R.; Roberts, C. E., Jr.; Ezekoye, O. A.; Matthews, R. D. (1997) Condensation of Fuel on Combustion Chamber Surfaces as a Mechanism for Increased HC Emissions During Cold Start, SAE Technical Paper 972884; The Society of Automotive Engineers, Warrendale, PA, 1997.
-
(1997)
Condensation of Fuel on Combustion Chamber Surfaces As a Mechanism for Increased HC Emissions during Cold Start
-
-
Stanglmaier, R.1
Roberts Jr., C.E.2
Ezekoye, O.A.3
Matthews, R.D.4
-
17
-
-
33748759055
-
-
SAE 2001-01-0679; The Society of Automotive Engineers, Warrendale, PA
-
Kane, E.; Mehta, D.; Frey, C. Refinement of a Dedicated E85 Silverado with Emphasis on Cold Start and Cold Driveability, SAE 2001-01-0679; The Society of Automotive Engineers, Warrendale, PA, 2001.
-
(2001)
Refinement of a Dedicated E85 Silverado with Emphasis on Cold Start and Cold Driveability
-
-
Kane, E.1
Mehta, D.2
Frey, C.3
-
18
-
-
33748776359
-
-
U.S. Patent 6,119,637, 2000
-
Matthews, R. D.; Stanglmaier, R. H.; Davis, G. C.; Dai W., U.S. Patent 6,119,637, 2000.
-
-
-
Matthews, R.D.1
Stanglmaier, R.H.2
Davis, G.C.3
Dai, W.4
-
20
-
-
14844287510
-
-
Title 40
-
United States Government, Protection of the Environment. Code of Federal Regulations, Title 40, 2003.
-
(2003)
Code of Federal Regulations
-
-
-
21
-
-
85072435270
-
-
SAE 940963; Society of Automotive Engineers: Warrendale, PA
-
Kaiser, E. W.; Siegl, W. O.; Baidas, L. M.; Lawson, G. P.; Cramer, C. F.; Dobbins, K. L.; Roth, P. W.; Smokovitz, M. Time-resolved measurement of speciated hydrocarbon emissions during cold start of a spark-ignited engine, SAE 940963; Society of Automotive Engineers: Warrendale, PA, 1994.
-
(1994)
Time-Resolved Measurement of Speciated Hydrocarbon Emissions during Cold Start of a Spark-Ignited Engine
-
-
Kaiser, E.W.1
Siegl, W.O.2
Baidas, L.M.3
Lawson, G.P.4
Cramer, C.F.5
Dobbins, K.L.6
Roth, P.W.7
Smokovitz, M.8
|