Temperature distributions due to annular laser beam heating

Journal of Laser Applications

Volumn 17, Issue 4, 2005, Pages 256-262

  Zeng, D ^a   Latham, W P ^b   Kar, A ^a  

^a UNIVERSITY OF CENTRAL FLORIDA   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

Annular laser beam; Laser drilling; Optical trepanning; Temperature distribution

Indexed keywords

ANALYTIC SOLUTION; ANNULAR BEAMS; ANNULAR LASER BEAM; ANNULAR LASER BEAMS; AXISYMMETRIC; CIRCULAR LASER BEAMS; DRILLING PROCESS; GAUSSIAN; HOLE QUALITY; IRRADIANCE PROFILES; LASER DRILLING; LASER ENERGIES; LASER PARAMETERS; OPTICAL TREPANNING; PULSED ANNULAR LASER BEAMS; SEMI-INFINITE; SPATIAL BEAM SHAPING; TEMPORAL PROFILE; TRANSIENT HEAT CONDUCTION; WORK PIECES;

DRILLING; GAUSSIAN BEAMS; GLASS INDUSTRY; HEAT CONDUCTION; HEATING; LAPLACE TRANSFORMS; LASER HEATING; LASER PULSES; LASERS; TEMPERATURE DISTRIBUTION; THERMOANALYSIS;

PULSED LASER APPLICATIONS;

EID: 33748605159     PISSN: 1042346X     EISSN: None     Source Type: Journal    
DOI: 10.2351/1.2080467     Document Type: Article

References (31)

1. J. F. Ready and D. F. Farson, LIA Handbook of Laser Material Processing (Magnolia, Orlando, 2001), pp. 471-512.
2. Th. Beck, G. Bostanjoglo, N. Kugler, K. Richter, and H. Weber, "Laser beam drilling applications in novel materials for the aircraft industry," in Proceedings of the 1997 Laser Materials Processing Conference, ICA-LEO'97, edited by R. Fabbro and A. Kar (Laser Institute of America, San Diego, CA, 1997), Sec. E, pp. 93-102.
3. C. L. Chan and J. Mazumder, "One-dimensional steady-state model for damage by vaporization and liquid expulsion due to laser-material interaction," J. Appl. Phys. 62, 4579-4586 (1987).
4. E. Armon, Y. Zvirin, G. Laufer, and A. Solan, "Metal drilling with CO, laser beam. I. Theory," J. Appl. Phys. 65, 4995-5002 (1989).
5. 2 laser beam. II. Analysis of aluminum drilling experiment," J. Appl. Phys. 65, 5003-5006 (1989).
6. W. O. Radley and C. S. William, "Laser drilling with focused Gaussian beams," J. Appl. Phys. 36, 3686-3696 (1992).
7. A. Kar and J. Mazumder, 'Two-dimensional model for material damage due to melting and vaporization during laser irradiation," J. Appl. Phys. 68, 3884-3891 (1990).
8. A. Kar, T. Rockstroh, and J. Mazumder, 'Two-dimensional model for laser-induced materials damage: Effects of assist gas and multiple reflection inside the cavity," J. Appl. Phys. 71, 2560-2569 (1992).
9. B. S. Yilbas and A. Z. Al-Garni, "Some aspects of laser heating of engineering materials," J. Laser Appl. 8, 197-204 (1996).
10. M. A. Shannon, "Simplified cavity analysis for estimating energy coupling during laser ablation and drilling of solids-theory," Appl. Surf. Sci. 127-129, 218-225 (1998).
11. Y. Zhang and A. Faghri, "Vaporization, melting and heat conduction in the laser drilling process," Int. J. Heat Mass Transfer 42, 1775-1790 (1999).
12. V. Semak and A. Matsunawa, "The role of recoil pressure in energy balance during laser materials processing," J. Phys. D 30, 2541-2552 (1997).
13. P. Solana, P. Kapadia, J. M. Dowden, and P. J. Marsden, "An analytical model for the laser drilling of metals with absorption within the vapour," J. Phys. D 32, 942-952 (1999).
14. S. Sankaranarayanan and A. Kar, "Nonlinear effects of laser-plasma interaction on melt-surface temperature," J. Phys. D 32, 777-784 (1999).
15. S. Sankaranarayanan, H. Emminger, and A. Kar, "Partitioning of laser energy between plasma and workplace in laser drilling," in Proceedings of the 1998 Laser Materials Processing Conference, ICALEO'98, edited by E. Beyer, X. Chen, and I. Miyamoto (Laser Institute of America, Orlando, FL, 1998), Sec. B, pp. 20-29.
16. J. Cheng, F. J. Kahlen, and A. Kar, "Effects of intrapulse structure on hole geometry in laser drilling," J. Laser Appl. 12, 232-238 (2000).
17. A. Ruf, P. Berger, F. Dausinger, and H. Hugel, "Analytical investigations on geometrical influences on laser drilling," J. Phys. D 34, 2918-1925 (2001).
18. D. K. Y. Low, L. Li, and P. J. Byrd, "Hydrodynamic physical modeling of laser drilling," Trans. ASME 124, 852-862 (2002).
19. M. Ghoreishi, D. K. Y. Low, and L. Li, "Comparative statistical analysis of hole taper and circularity in laser percussion drilling," Int. J. Mach. Tools Manuf. 42, 985-995 (2002).
20. R. Setia and G. May, "Modeling the laser ablation process using neural networks," in Advances in Electronic Packaging (International Electronic Packaging Technical Conference and Exhibition, Haui, HI, 2003), Vol. 1, pp. 161-167.
21. C. Y. Ho and M. Y. Wen, "Distribution of the intensity absorbed by the keyhole wall in laser processing," J. Mater. Process. Technol. 145, 303-310 2004.
22. M. Rioux, R. Tremblay, and P. A. Belanger, "Linear, annular, and radial focusing with axicons and applications to laser machining," Appl. Opt. 17, 1532-1536 (1978).
23. P. A. Belanger and M. Rioux, "Ring pattern of a Iens-axicon doublet illuminated by a Gaussian beam," Appl. Opt. 17, 1080-1086 (1978).
24. A. Kar and M. D. Langlais, "Optothermal effects of laser modes in laser materials processing," Opt. Quantum Electron. 27, 1165-1180 (1995).
25. N. Rykalin, A. Uglov, and A. Kokora, Laser Machining and Welding (Mir, Moscow, 1975), pp. 126-194.
26. L. Debnath, Integral Transforms and Their Applications (CRC Press, Boca Raton, 2000), pp. 83-117, 193-205.
27. H. Bateman, Tables of Integral Transforms (McGraw-Hill, New York, 1954) Vol. 2, pp. 50-51.
28. C. L. Mantell, Engineering Materials Handbook (McGraw-Hill, New York, 1958), Sec. 10, pp. 1-30.
29. G. Pottlacher, H. Hosaeus, E. Kaschnitz, and A. Seifter, "Thermophysical properties of solid and liquid Inconel 718 Alloy," Scand. J. Metall. 31, 161-168 (2002).
30. D. Basak, R. A. Overfelt, and D. Wang, "Measurement of specific heat capacity and electrical resistivity of industrial alloys using pulse heating techniques," Int. J. Thermophys. 24, 1721-1733 (2003)
31. R. Overfelt and R. Taylor (unpublished research); thermophysical property data available at http;//metalcasting.aubum.edu.