A design methodology for mechanically fastened joints in laminated composite materials

Composites Science and Technology

Volumn 66, Issue 15, 2006, Pages 3004-3020

  Camanho, P P ^a   Lambert, M ^b  

^a UNIVERSITY OF PORTO   (Portugal)

^b EUROPEAN SPACE AGENCY   (Netherlands)

Author keywords

B. Fracture; B. Strength; C. Stress concentrations; E. Joints joining

Indexed keywords

FAILURE ANALYSIS; FRACTURE; JOINTS (STRUCTURAL COMPONENTS); NUMERICAL METHODS; STRESS CONCENTRATION;

AVERAGE STRESS MODELS; PLY STRENGTHS; QUASI-ISOTROPIC LAMINATES;

LAMINATED COMPOSITES;

FAILURE ANALYSIS; FIBER REINFORCED COMPOSITE; FRACTURE; LAMINATE; MATHEMATICAL MODEL; STRENGTH; STRESS;

EID: 33748577180     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2006.02.017     Document Type: Article

References (36)

1. Camanho PP. Application of numerical methods to the strength prediction of mechanically fastened joints in composite laminates, PhD thesis, Centre for Composite Materials, Department of Aeronautics, Imperial College London, UK; 1999.
2. Hart-Smith LJ. Design and analysis of bolted and riveted joints in fibrous composite structures, Douglas Paper 7739, 1-15, McDonnell Douglas Corporation; 1986.
3. Camanho P.P., and Matthews F.L. Stress analysis and strength prediction in FRP joints: a review. Composites - Part A 28 (1997) 529-547
4. Turon A, Camanho PP, Costa J, Dávila CG. An interface damage model for the simulation of delamination under variable-mode ratio in composite materials, NASA/TM-2004-213277, National Aeronautics and Space Administration; 2004.
5. Camanho P.P., and Matthews F.L. A progressive damage model for mechanically fastened joints in composite laminates. J Compos Mater 33 (1999) 2248-2280
6. Maimí P, Camanho PP, Mayugo JA, Dávila CG. A thermodynamically consistent damage model for advanced composites, NASA/TM, National Aeronautics and Space Administration [in press].
7. Turon A, Camanho PP, Costa J, Dávila CG. A damage model for the simulation of delamination in advanced composites under variable-mode loading. Mech Mater [in press].
8. Camanho P.P., Portela P.M., Melro A.R., and Lambert M. Enhanced design methods for mechanically fastened joints in composite structures. Proceedings of the European conference on spacecraft structures, materials and mechanical testing (2005), European Space Agency, Noordwijck, The Netherlands
9. Standard test method for tensile properties of polymer matrix composite materials, ASTM D 3039/D 3039M-00. West Conshohocken, PA, USA: American Society for Testing and Materials (ASTM).
10. Standard test method for compressive properties of unidirectional or cross-ply fiber-resin composites, ASTM D 3410-87. West Conshohocken, PA, USA: American Society for Testing and Materials (ASTM).
11. Standard test method for in-plane shear response of polymer matrix composite materials by test of a ±45° laminate, ASTM D 3518/3518M-94. West Conshohocken, PA, USA: American Society for Testing and Materials (ASTM).
12. Camanho P.P., Dávila C.G., Pinho S.T., Iannucci L., and Robinson P. Prediction of in-situ strengths and matrix cracking in composites under transverse tension and in-plane shear. Composites - Part A 37 (2006) 165-176
13. Standard test method for mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites, ASTM D 5528-01. West Conshohocken, PA, USA: American Society for Testing and Materials (ASTM).
14. Martin R, Elms T, Bowron S. Characterization of mode II delamination using the 4ENF. In: Proceedings of the 4th European conference on composites: testing and standardisation, Lisbon; 1998.
15. Dvorak G.J., and Laws N. Analysis of progressive matrix cracking in composite laminates II. Fisrt ply failure. J Compos Mater 21 (1987) 309-329
16. Hahn H.T., and Tsai S.W. Nonlinear elastic behaviour of unidirectional composite laminate. J Compos Mater 7 (1973) 102-110
17. Dávila C.G., Camanho P.P., and Rose C.A. Failure criteria for FRP laminates. J Compos Mater 39 (2005) 323-345
18. Pinho ST, Dávila CG, Camanho PP, Iannucci L, Robinson P. Failure models and criteria for FRP under in-plane or three-dimensional stress states including shear non-linearity, NASA Technical Memorandum 213530. USA: National Aeronautics and Space Administration; 2005.
19. Puck A., and Schürmann H. Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Technol 58 (1998) 1045-1067
20. Lekhnitskii S. Anisotropic plates (1968), Gordon and Breach Science Publishers, New York
21. de Jong T. Stresses around pin-loaded holes in elastically orthotropic or isotropic plates. J Compos Mater 11 (1977) 313-331
22. Garbo SP, Ogonowski J. Effect of variances and manufacturing tolerances on the design strength and life of mechanically fastened composite joints, Tech. Rep. AFWAL-TR-81-3041, vol. 1, McDonnell Aircraft Company; 1981.
23. Ogonowski J. Effect of variances and manufacturing tolerances on the design strength and life of mechanically fastened composite joints, Tech. Rep. AFWAL-TR-81-3041, vol. 3, McDonnell Aircraft Company; 1981.
24. Waddoups M.E., Eisenmann J.R., and Kaminski B.E. Macroscopic fracture mechanics of advanced composite materials. J Compos Mater 5 (1971) 446-454
25. Whitney J.M., and Nuismer R.J. Stress fracture criteria for laminated composites containing stress concentrations. J Compos Mater 8 (1974) 253-265
26. Chang F.K., Scott R.A., and Springer G.S. Strength of mechanically fastened composite joints. J Compos Mater 16 (1982) 470-494
27. Tan S.C. Stress concentrations in laminated composites (2004), Technomic Publishing Company, Inc., Lancaster, Pennsylvania, USA
28. Yamada S.E., and Sun C.T. Analysis of laminate strength and its distribution. J Compos Mater 12 (1978) 275-284
29. Taguchi G., and Konishi S. Taguchi methods: orthogonal arrays and linear graphs (1987), ASI Press, Allen Park, Michigan, USA
30. Open hole tensile strength of polymer composite laminates, ASTM D 5766/D 5766M-02a. West Conshohocken, PA, USA: American Society for Testing and Materials (ASTM).
31. Camanho P.P., Bowron S., and Matthews F.L. Failure mechanisms in bolted CFRP. J Reinfor Plast Compos 17 (1998) 205-233
32. MIL-HDBK-17, Military handbook, Polymer matrix composites. US Department of Defense; 1994.
33. Standard test method for bearing response of polymer matrix composite laminates, ASTM D 5961/D 5961M-01. West Conshohocken, PA, USA: American Society for Testing and Materials (ASTM).
34. Abaqus 6.5 User's manual. Pawtucket, RI, USA: Abaqus Inc.; 2005.
35. Crews J.H., and Naik R.A. Combined bearing-bypass loading on a graphite/epoxy laminate. Compos Struct 6 (1986) 21-40
36. Herakovich C.T. Mechanics of fibrous composites (1998), Wiley, New York