Innovative methodologies for the utilisation of wastes from metallurgical and allied industries

Resources, Conservation and Recycling

Volumn 48, Issue 4, 2006, Pages 301-314

  Kumar, Sanjay ^a   Kumar, Rakesh ^a   Bandopadhyay, Amitava ^a  

^a NATIONAL METALLURGICAL LABORATORY   (India)

Author keywords

Mechanical activation; Metal recovery; Recycling; Utilisation of granulated blast furnace slag and fly ash; Value added products; Waste management

Indexed keywords

CONSUMER PRODUCTS; FLY ASH; METAL RECOVERY; RECYCLING; SLAGS; VALUE ENGINEERING;

BLENDED CEMENTS; MECHANICAL ACTIVATION; SYNTHETIC GRANITE;

WASTE MANAGEMENT;

CEMENT; COAL; IRON; TITANIUM;

CONSUMER PRODUCTS; FLY ASH; METAL RECOVERY; RECYCLING; SLAGS; VALUE ENGINEERING; WASTE MANAGEMENT;

COAL-FIRED POWER PLANT; INDUSTRIAL WASTE; INOCULATION; METALS INDUSTRY; METHODOLOGY; RECYCLING; SMELTING; SOLID WASTE; WASTE MANAGEMENT;

ALUMINUM FACTORY; FLY ASH; FURNACE; GRANITE; INDUSTRIAL WASTE; IRON AND STEEL INDUSTRY; METAL RECOVERY; METALLURGY; METHODOLOGY; RECYCLING; REVIEW; SLAG; SOLID WASTE; WASTE MANAGEMENT;

SUS SCROFA;

EID: 33748570177     PISSN: 09213449     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.resconrec.2006.03.003     Document Type: Review

References (44)

1. Ashokan P., Saxena M., and Asolekar S.R. Coal combustion residues-environmental implications and recycling potentials. Resour Conserv Recycl 43 (2005) 239-262
2. Balazs E.T., and Jambo J. In: Wagh A.S., and Desai P. (Eds). Bauxite tailings-red mud (1987), The Jamaican Bauxite Institute, University of West Indies, Kingston 121-125
3. In: Bandopadhyay A., Kumar R., and Ramachandrarao P. (Eds). Clean technologies for metallurgical industries (2002), Allied Publishers, New Delhi, India
4. Bandopadhyay A., Kumar S., Das S.K., and Singh K.K. In the pursuit of waste free metallurgy. NML Tech J 41 4 (1999) 143-162
5. Barbieri L., Bonfatti L., Ferrari A.M., Leonelli C., Manfredini T., and Settembre Bludo D. Relationship between microstructure and mechanical properties in fully vitrified stoneware. In: Vincenzini P. (Ed). Proceedings of the eighth CIMTEC World Ceramic Congress, Florance, Techna Publishers. Italy (1994) 99-103
6. Basu P. Alternative iron making technologies-an environmental impact analysis. In: Bandopadhyay A., Kumar R., and Ramachandrarao P. (Eds). Clean technologies for metallurgical industries (2002), Allied Publishers, New Delhi, India 194-202
7. Boldyrev V.V. Chem Sust Dev 83 11/12 (1986) 821-822
8. Boldyrev V.V., Polov S.V., and Goldberg E.L. Interrelation between fine grinding and mechanical activation. Int J Miner Process 44-45 (1996) 181-185
9. Csikos R, Batory J, Farkas I. Process for making red mud and bauxite iron free and for the preparation of a raw material for alumina industry and iron pentacarbonyl. UK Patent GB 2171985A, UK (1986).
10. Das SK, Kumar S, Singh KK. Process for the production of ceramic tiles. Patent no. 13005NF, filed in 2003 in Australia (2003).
11. Das S.K., Kumar S., and Ramachandrarao P. Exploitation of iron ore tailing for the development of ceramic tiles. Waste Manage 20 8 (2000) 725-729
12. Dondi M., Ercolani G., Melandri C., Mingazzini C., and Marsigli M. The chemical composition of porcelain stoneware tiles and its influence on microstructural and mechanical properties. Interceramics 48 2 (1995) 75-83
13. Dondi M., Fabbri B., Manfredini T., and Pellacani G.C. Microstructure and mechanical properties of porcelainised stoneware tiles. In: Palmonari C. (Ed). Proceedings of the fourth euro-ceramics, floor and wall tiles. Faenza, Italy (1995) 319-321
14. Dongxum L., Xuequan W., Jinlin S., and Yujiang W. The influence of compound admixtures on the properties of high-content slag cement. Cem Concr Res 30 (2000) 45-50
15. EPA draft report on the environment. EPA document no. EPA-260-R-02-006; June 2003.
16. Fursman OC, Mauser JE, Butler MO, Stickney WA. Utilisation of red mud residues from alumina production. U.S. Bureau of mines report of investigations, 7454; 1970.
17. 3 strengthened feldspathic porcelain bodies: effects of the amount and particle size of alumina. Ceram Eng Sci Proc 17 1 (1996) 88-98
18. Johansson A. Clean technology (1992), Lewis Publishers, Boca Raton, FL, USA
19. Juhasz A.Z., and Opoczky L. Mechanical activation of minerals by grinding: pulverizing and morphology of particles (1994), Ellis Horwood Limited, NY
20. Kumar R., Kumar S., and Mehrotra S.P. Fly ash: towards sustainable solutions. Proceedings of the international conference fly ash India. TIFAC, Department of Science and Technology, New Delhi, India (2005) 11-12
21. Kumar R., Alex T.C., Khan Z.H., Mahapatra S.P., and Mehrotra S.P. Mechanical activation of bauxite-potential and prospects in the Bayer process. In: Kvande H. (Ed). Light metals (2005), The Minerals, Metals and Materials Society, Warrendale, PA 77-79
22. Kumar S., Kumar R., Bandopadhyay A., Mittra B.K., and Mehrotra S.P. Mechanochemistry in cement research: potential for high volume utilization of industrial waste. Presented in 69th annual session of Indian ceramic society. Jamshedpur, India, December 28-29 (2005)
23. Kumar R., Kumar S., BadJena S.K., and Mehrotra S.P. Hydration of mechanically activated granulated blast furnace slag. Met Mater Trans B 36B (2005) 473-484
24. Kumar S., Rajnikanth V., Alex T.C., Mittra B.K., Khan Z.H., Mishra I.B., et al. Utilization of high volume of blast furnace slag and fly ash in blended cements through high energy milling. In: Lakshmanan N., Gopalakrishnan S., and Sreenath H.G. (Eds). Proceedings of the international conference on advances in concrete composites and structures, Allied Publishers. Chennai (2005) 113-120
25. 3-C system and its implications in the processing of red mud (2002), Metallurgy of Nonferrous and Rare Metals 137-153
26. Kumar R., Srivastava J.P., and Premchand. Utilization of iron values of red mud for metallurgical applications. In: Bandopadhyay A., Goswami N.G., and Ramachandrarao P. (Eds). Proceedings of the environmental and waste management in nonferrous metallurgical industries. National Metallurgical Laboratory, Jamshedpur, India (1998) 108-119
27. Kumar S., and Singh K.K. Effects of fly ash additions on the sintering and physico-mechanical properties of ceramic tiles. J Met Mater Processes 16 2-3 (2004) 351-358
28. Kumar S., Bandopadhyay A., Rajinikanth V., Alex T.C., and Kumar R. Improved processing of blended slag cement through mechanical activation. J Mater Sci 39 (2004) 3449-3452
29. Kumar S., Bandopadhyay A., Rajinikant V., Alex T.C., Mishra I.B., Singh K.K., et al. Attrition milling for improved processing of blended cement. Proceedings of the eighth NCB international seminar on cement and building materials, NCCBM. New Delhi, India (2003) 73-79
30. Kumar S., Singh K.K., and Ramachandrarao P. Effects of fly ash additions on the mechanical and other properties of porcelainised stoneware tiles. J Mater Sci 36 (2001) 5917-5922
31. LCA report. Integrated report on "life cycle assessment study for steel sector". National Metallurgical Laboratory, Jamshedpur, India; March 2003.
32. Manfredini T., Pellacani G.C., Romagnoli M., and Pennisi L. Porcelainized stoneware tile. Am Ceram Soc Bull 75 5 (1995) 76-79
33. Marghussian V.K., and Yekta B.E. Single fast-fired wall tiles containing Iranian iron slag. Br Ceram Trans 93 4 (1994) 141-145
34. Olorunsogo F.T. Particle size distribution of GGBS and bleeding characteristics of slag cement mortars. Cem Concr Res 28 6 (1998) 907-919
35. Payá J., Monzó J., Borrachero M.V., Peris-Mora E., and González-López E. Mechanical treatment of fly ashes. Part II. Particle morphologies in ground fly ashes (GFA): and workability of GFA-cement mortars. Cem Concr Res 26 (1996) 225-235
36. Piga F.P., and Stoppa L. Recovering metals from red mud generated during alumina production. JOM 45 11 (1993) 55-59
37. Porkolab Z., Siklosi P., and Horwath G. Utilization of iron content of red mud. Banyasz Kohasz Lapok (Kosahz) 118 8 (1985) 361 (Hungarian)
38. Prasad P.M. Bauxite tailings (red muds) disposal management via utilisation. In: Ramachandrarao P., Kumar R., Srikanth S., and Goswami N.G. (Eds). Nonferrous extractive metallurgy in the new millennium (1999), National Metallurgical Laboratory, Jamshedpur, India 385-410
39. Prasad P.M., Kachawha J.S., Gupta R.C., Mankhand T.R., and Sharma J.M. Processing and applications of red muds. In: Suryanarayana C., Prasad P.M., Malhotra S.L., and Anantraman T.R. (Eds). Light metals science and technology (1985), Trans Tech Publication, Switzerland 31-52
40. Srikanth S., Alex T.C., Bandopadhyay A., and Jha A. Utilisation of red mud for the recovery of metallic values. In: Chakraborty D.M., Jana R.K., Kumar V., Pandey B.D., and Goswami N.G. (Eds). Proceedings of the international seminar on non-ferrous metals and materials. Jamshedpur, India (2000) 205-209
41. Tamotia SK. Processing of chemical, mining and metallurgical industries' wastes. Keynote lecture presented in the international symposium on "processing of chemical, mining and metallurgical industries' wastes (POCMIW-2003)", Bhubaneswar, India; August 27-29, 2003.
42. Thakur R.S., and Das S.N. Red mud analysis and utilisation (1994), PID and Wiley Eastern, New Delhi, India
43. Wojcik M. Advances in production and fabrication of light metals and metal matrix composites. Can Inst Min Mat Petrolium (Quebec, Canada) (1992) 75-80
44. Ziegenbalg S. Electrothermic processing of red mud. Erzmetall 38 4 (1985) 200-204 (German)