Proposed modifications to the Wheeler retardation model for multiple overloading fatigue life prediction

International Journal of Fatigue

Volumn 28, Issue 12, 2006, Pages 1803-1819

  Yuen, B K C ^a   Taheri, F ^a  

^a DALHOUSIE UNIVERSITY   (Canada)

Author keywords

350 WT steel; Delay retardation; Fatigue crack growth retardation; Initial acceleration; Multiple overloading; Net section yielding; Overload interaction; Wheeler model

Indexed keywords

CRACK PROPAGATION; FATIGUE TESTING; MATHEMATICAL MODELS; STEEL TESTING; STRUCTURAL LOADS;

350 WT STEEL; DELAY RETARDATION; FATIGUE CRACK GROWTH RETARDATION; INITIAL ACCELERATION; MULTIPLE OVERLOADING; NET SECTION YIELDING; OVERLOAD INTERACTION; WHEELER MODEL;

CORROSION FATIGUE;

EID: 33748473181     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2005.12.007     Document Type: Article

References (65)

1. Geary W. A review of some aspects of fatigue crack growth under variable amplitude loading. Int J Fatigue 14 6 (1992) 377-386
2. Goel H.S., and Chand S. A fatigue crack growth model for single overload tests. J Eng Mater Technol, Trans ASME 14 116 (1994) 168-172
3. Kumar R., Kumar A., and Kumar S. Delay effects in fatigue crack propagation. Int J Pressure Vessels Piping 67 (1996) 1-5
4. Borrego L.P., Ferreira J.M., Pinho da Cruz J.M., and Costa J.M. Evaluation of overload effects on fatigue crack growth and closure. Eng Fract Mech 70 (2003) 1379-1397
5. Corbly D.M., and Packman P.F. On the influence of single and multiple peak overloads on fatigue crack propagation in 7075-T6511 aluminum. Eng Fract Mech 5 (1973) 479-497
6. Mills W.J., and Hertzberg R.W. Load interaction effects on fatigue crack propagation in 2024-T3 aluminum alloy. Eng Fract Mech 8 (1976) 657-667
7. Cheng X., Okuhara Y., Yamada K., and Kondo A. Fatigue crack growth rate measurement of structural steel under overload conditions. Proc JSCE, Struct Eng/Earthquake Eng 11 1 (1994) 45s-52s
8. Shuter D.M., and Geary W. Some aspect of fatigue crack growth retardation behaviour following tensile overloads in a structural steel. Fatigue Fract Eng Mater Struct 19 2/3 (1996) 185-199
9. Hammouda M.M.I., Ahmad S.S.E., Seleem M.H., and Sallam H.E.M. Fatigue crack growth due to two successive single overloads. Fatigue Fract Eng Mater Struct 21 (1998) 1537-1547
10. Lang M., and Marci G. The influence of single and multiple overloads on fatigue crack propagation. Fatigue Fract Eng Mater Struct 22 (1999) 257-271
11. Vardar O., and Yildirim N. Crack growth retardation due to intermittent overloads. Int J Fatigue 12 4 (1990) 283-287
12. Yildirim N., and Vardar O. Study of periodic overloads at a fixed overload-ratio. Eng Fract Mech 36 1 (1990) 71-76
13. Tür Y.K., and Vardar O. Periodic tensile overloads in 2024-T3 Al-alloy. Eng Fract Mech 53 1 (1996) 69-77
14. Skorupa M, Schijve J, Skorupa A, Zachwieja A. Experimental results and predictions on crack growth in a structural steel under periodically applied single and multiple overloads. In: Proceedings of the 17th international conference on offshore mechanics and arctic engineering, OMAE98-2453; 1998.
15. Yamada K., Cao Q., Okuhara Y., and Cheng X. Fatigue crack growth behavior of various structural steel after single and periodic overloads. Proc JSCE, Struct Eng/Earthquake Eng 15 2 (1998) 191s-200s
16. Wheeler O.E. Spectrum loading and crack growth. J Basic Eng, Trans ASME 94 1 (1972) 181-186
17. Kim K.S., Kim S.C., Shim C.S., and Park J.Y. A study on the effect of overload ratio on fatigue crack growth. Key Eng Mater 261-263 (2004) 1159-1168
18. Kim K.S., Kim K.S., Shim C.S., and Cho H.M. A study on evaluation of overload effects on fatigue crack growth. Key Eng Mater 261-263 (2004) 1169-1178
19. Taheri F., Trask D., and Pegg N. Experimental and analytical investigation of fatigue characteristics of 350WT steel under constant and variable amplitude loadings. J Marine Struct 16 (2003) 69-91
20. Rushton P.A., and Taheri F. Prediction of variable amplitude crack growth in 350WT steel using a modified wheeler approach. J Marine Struct 16 7 (2003) 517-539
21. Willenborg JD, Engle RM, Wood HA. A crack growth retardation model using an effective stress concept, Report AFFEL-TM-71-1-FBR, Dayton (OH): Air Force Flight Dynamics Laboratory, Wright-Patterson Air Force Base; 1971.
22. Rudd J.L., and Engle Jr. R.M. Crack growth behavior of center-cracked panels under random spectrum loading. In: Chang J.B., and Hudson C.M. (Eds). Methods and models for predicting fatigue crack growth under random loading. ASTM STP vol. 748 (1981), American Society for Testing and Materials 103-114
23. Chang J.B., Szamossi M., and Liu K.W. Random spectrum fatigue crack life predictions with or without considering load interactions. In: Chang J.B., and Hudson C.M. (Eds). Methods and models for predicting fatigue crack growth under random loading. ASTM STP vol. 748 (1981), American Society for Testing and Materials 115-132
24. Finney J.M. Modelling for fatigue crack growth prediction in aircraft. Fatigue Fract Eng Mater Struct 8 3 (1985) 205-222
25. Johnson W.S. Multi-parameter yield zone model for predicting spectrum crack growth. In: Chang J.B., and Hudson C.M. (Eds). Methods and models for predicting fatigue crack growth under random loading. ASTM STP vol. 748 (1981), American Society for Testing and Materials 85-102
26. Manjunatha CM, Parida BK. A model for predicting the overload effects on fatigue crack growth behavior. In: Collection of technical papers - AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference, vol. 2; 2003. p. 1129-38.
27. Nicholas T., Haritos G.K., Hastie Jr. R.L., and Harms K. The effects of overloads on sustained-load crack growth in a nickel-based superalloy: Part I - Analysis. Theor Appl Fract Mech 16 (1991) 35-49
28. Kim J.K., and Shim D.S. A statistical approach for predicting the crack retardation due to a single tensile overload. Int J Fatigue 25 (2003) 335-342
29. Pavlou D.G. Prediction of fatigue crack growth under real stress histories. Eng Struct 22 (2000) 1707-1713
30. eff Concept. In: McClung R.C., and Newman Jr. J.C. (Eds). Advances in fatigue crack closure measurement and analysis. ASTM STP vol. 1343 (1999), American Society for Testing and Materials, West Conshohocken (PA) 207-223
31. Darcis Ph, Li J, Recho N. Calculation of the stress intensity factor variation due to residual stress following an overload. In: Advances in damage mechanics, fatigue damage of materials: experiment and analysis; 2003. p. 99-109.
32. Elber W. The significance of fatigue crack closure. Damage tolerance in aircraft structures. ASTM STP vol. 486 (1971), American Society for Testing and Materials 230-242
33. Kim C.Y., and Song J.H. Fatigue crack closure and growth behavior under random loading. Eng Fract Mech 49 1 (1994) 105-120
34. Dominguez J., Zapatero J., and Moreno B. A statistical model for fatigue crack growth under random loads including retardation effects. Eng Fract Mech 62 (1999) 351-369
35. Jono M., Sugeta A., and Uematsu Y. Fatigue crack growth and crack closure behavior of ti-6al-4v alloy under variable amplitude loadings. In: McClung R.C., and Newman Jr. J.C. (Eds). Advances in fatigue crack closure measurement and analysis. ASTM STP vol. 1343 (1999), American Society for Testing and Materials, West Conshohocken (PA) 265-284
36. Lee C.F. EndoFEM intergrated methodology of fatique crack propagation with overloaded delay retardation. The Chinese Journal of Mechanics - Series A 19 2 (2003) 327-335
37. Sander M., and Richard H.A. Finite element analysis of fatigue crack growth with interspersed mode i and mixed mode overloads. Int J Fatigue 27 (2005) 905-913
38. Ljustell P., and Nilsson F. Variable amplitude crack growth in notched specimens. Eng Fract Mech 72 (2005) 2703-2720
39. de Koning A.U. A simple crack closure model for prediction of fatigue crack growth rates under variable-amplitude loading. In: Roberts R. (Ed). Fracture mechanics: thirteenth conference. ASTM STP vol. 743 (1981), American Society for Testing and Materials 63-85
40. Skorupa M, Skorupa A, Ladecki B. Predicting overload-affected fatigue crack growth in steels. In: Proceedings of the 15th international conference on offshore mechanics and arctic engineering - OMAE, vol. 3; 1996. p. 359-64.
41. Newman Jr. J.C. A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading. In: Chang J.B., and Hudson C.M. (Eds). Methods and models for predicting fatigue crack growth under random loading. ASTM STP vol. 748 (1981), American Society for Testing and Materials 53-84
42. Newman Jr. J.C. Prediction of fatigue crack growth under variable-amplitude and spectrum loading using a closure model. In: Abelkis P.R., and Hudson C.M. (Eds). Design of fatigue and fracture resistant structures. ASTM STP vol. 761 (1982), American Society for Testing and Materials 255-277
43. Dexter R.J., Hudak Jr. S.J., and Davidson D.L. Modelling and measurement of crack closure and crack growth following overloads and underloads. Eng Fract Mech 33 6 (1989) 855-870
44. Patankar R., Ray A., and Lakhtakia A. A state-space model of fatigue crack growth. Int J Fract 90 (1998) 235-249
45. Ray A., and Patankar R. A stochastic model of fatigue crack propagation under variable-amplitude loading. Eng Fract Mech 62 (1999) 477-493
46. Skorupa M., Schijve J., Skorupa A., and Machniewicz T. Fatigue crack growth in a structural steel under single and multiple periodic overload cycles. Fatigue Fract Eng Mater Struct 22 (1999) 879-887
47. McMaster F.J., and Smith D.J. Predictions of fatigue crack growth in aluminium alloy 2024-T351 using constraint factors. Int J Fatigue 23 (2001) S93-S101
48. Zapatero J., Moreno B., Gonzalez-Herrera A., and Dominguez J. Numerical and experimental analysis of fatigue crack growth under random loading. Int J Fatigue 27 (2005) 878-890
49. Skorupa M., and Skorupa A. Experimental results and predictions on fatigue crack growth in structural steel. Int J Fatigue 27 (2005) 1016-1028
50. Pompetzki M.A., Topper T.H., Duquesnay D.L., and Yu M.T. Effect of compressive underloads and tensile overloads on fatigue damage accumulation in 2024-T351 aluminum. J Testing Evaluat 18 1 (1990) 53-61
51. Bolotin V.V., and Lebedev V.L. Analytical model of fatigue crack growth retardation due to overloading. Int J Solids Struct 33 9 (1996) 1229-1242
52. Lee B.L., Kim K.S., and Nam K.M. Fatigue analysis under variable amplitude loading using an energy parameter. Int J Fatigue 25 (2003) 621-631
53. Gray T.D., and Gallagher J.P. Predicting fatigue crack retardation following a single overload using a modified wheeler model. Mechanics of crack growth. ASTM STP vol. 590 (1976), American Society for Testing and Materials 331-344
54. Dolinski K. Fatigue crack growth with retardation under stationary stochastic loading. Eng Fract Mech 27 3 (1987) 279-290
55. Alawi H. Designing reliably for fatigue crack growth under random loading. Eng Fract Mech 37 1 (1990) 75-85
56. Sheu B.C., Song P.S., and Hwang S. Shaping exponent in wheeler model under a single overload. Eng Fract Mech 51 1 (1995) 135-143
57. Khan Z., Rauf A., and Younas M. Prediction of fatigue crack propagation life in notched members under variable amplitude loading. J Mater Eng Perform 6 3 (1997) 365-373
58. Hawkyard M., Powell B.E., Stephenson J.M., and McElhone M. Fatigue crack growth from simulated flight cycles involving superimposed vibrations. Int J Fatigue 21 (1999) S59-S68
59. Song P.S., Sheu B.C., and Chang L. A modified wheeler model to improve predictions of crack growth following a single overload. JSME Int J Series A 44 1 (2001) 117-122
60. Wahab M.A., Rohrsheim G.R., and Park J.H. Experimental study on the influence of overload induced residual stress field on fatigue crack growth in aluminium alloy. J Mater Process Technol 153-154 (2004) 945-951
61. Paris P., and Erdogan F. A critical analysis of crack propagation laws. J Basic Eng, Trans ASME 85 (1963) 528-534
62. Standard test method for measurement of fatigue crack growth rates, ASTM E647-00, West Conshohocken (PA): American Society for Testing & Materials; 2000.
63. Makabe C., Purnowidodo A., Miyazaki T., and McEvily A.J. Deceleration and acceleration of crack propagation after an overload under negative baseline stress ratio. J Test Evaluat 33 3 (2005) 181-187
64. Rushton P.A., Taheri F., and Stredulinsky D.C. Threshold & variable amplitude crack growth behavior in 350 WT steel. ASME-PVP 441 (2002) 81-89
65. Yuen B.K.C., and Taheri F. Proposed modification to the Zheng and Hirt fatigue model. J Mater Eng Perform 13 2 (2004) 226-231