Rapid calculation of the pressures and clearances in rough, elastohydrodynamically lubricated contacts under pure rolling. Part 1: Low amplitude, sinusoidal roughness

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

Volumn 220, Issue 6, 2006, Pages 901-913

  Hooke, C J ^a   Li, K Y ^b  

^a UNIVERSITY OF BIRMINGHAM   (United Kingdom)

^b CITY UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

Elastohydrodynamically lubricated (EHL); Perturbation; Rough

Indexed keywords

CONTACTS (FLUID MECHANICS); PERTURBATION TECHNIQUES; PRESSURE; SURFACE ROUGHNESS;

CLEARANCE CALCULATION; PRESSURE CALCULATION; REAL-TIME DESIGN PROCESS;

ELASTOHYDRODYNAMIC LUBRICATION;

CONTACTS (FLUID MECHANICS); ELASTOHYDRODYNAMIC LUBRICATION; PERTURBATION TECHNIQUES; PRESSURE; SURFACE ROUGHNESS;

EID: 33748312238     PISSN: 09544062     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544062C03405     Document Type: Article

References (18)

1. Venner, C. H. Multi-level solution of the elastohydrodynamic line and point contact problems. Proefschrift, Universiteit Twente, The Netherlands, 1991.
2. Venner, C. H. and Lubrecht, A. A. Multi-level methods in lubrication, 2000 (Elsevier, Amsterdam).
3. Venner, C. H. and Lubrecht, A. A. Numerical analysis of the influence of waviness on the film thickness of a circular EHL contact. Trans. ASME. J. Tribol., 1995, 118, 153-161.
4. Venner, C. H., Couhier, F., Lubrecht, A. A., and Greenwood, J. A. Amplitude reduction of waviness in transient EHL line contacts. Proceedings of 22nd Leeds-Lyon Symposium on Tribology, Elsevier Tribology Series 32, 1996, Amsterdam, pp. 103-112.
5. Venner, C. H. and Lubrecht, A. A. Amplitude reduction of non-isotropic harmonic patterns in EHL circular contacts under pure rolling. Proceedings of 25th Leeds-Lyon Symposium on Tribology, Elsevier Tribology Series 36, 1999, Amsterdam, pp. 151-162.
6. Hooke, C. J. Surface roughness modification in EHL line contacts - the effect of roughness wavelength, orientation and operating conditions. Proceedings of 25th Leeds-Lyon Symposium on Tribology, Lyon, September 1998.
7. Hooke, C. J. The behaviour of heavily loaded line contacts with transverse roughness. Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 1999, 213, 309-320.
8. Hooke, C. J. The behaviour of low amplitude surface roughness under line contacts. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 1999, 213, 275-286.
9. Hooke, C. J. The behaviour of low amplitude surface roughness under line contacts: non-Newtonian fluids. Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 2000, 214, 253-265.
10. Hooke, C. J. and Venner, C. H. Surface roughness attenuation in line and point contacts. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2000, 214, 439-444.
11. Hooke, C. J. Roughness attenuation and pressure rippling in EHL contacts. Proceedings of IUTAM Conference on Elastohydrodynamics and microelastohydrodynamics, Cardiff, September 2004.
12. Hooke, C. J. The effects of roughness in EHL contacts. Proceedings of the 31st Leeds-Lyon Symposium on Tribology, Lyon, September 2004, 2005, pp. 31-64 (Elsevier, Amsterdam).
13. Johnson, K. L. Contact mechanics, 1985 (Cambridge University Press, Cambridge).
14. Roelands, C. Correlational aspects of the viscosity-temperature-pressure relationship of lubrication oils. PhD Thesis, Technische Hogeschool Delft, The Netherlands, 1966.
15. Dowson, D. and Higginson, G. R. Elasto-hydrodynamic lubrication, 1966 (Pergamon Press, Oxford).
16. Dowson, D., Higginson, G. R., and Whitaker, A. V. Elasto-hydrodynamic lubrication - a survey of isothermal solutions. J. Mech. Eng. Sci., 1962, 4, 121-126.
17. Tao, J., Hughes, T. G., Evans, H. P., and Snidle, R. W. Elastohydrodynamic response of transverse ground gear teeth. Proceedings of 28th Leeds-Lyon Symposium on Tribology, September 2001, 2002, pp. 447-458 (Elsevier, Amsterdam).
18. Hooke, C. J. and Li, K. Y. Rapid calculation of the pressures and clearances in rough, elastohydrodynamically lubricated contacts under pure rolling. Part 2: general roughness. Proc. IMechE, Part C: J. Mechanical Engineering Science, 2006, 220(C6), 915-925.