Single-level optimization of a hybrid SOFC-GT power plant

Journal of Power Sources

Volumn 159, Issue 2, 2006, Pages 1169-1185

  Calise, F ^a   Dentice d' Accadia, M ^a   Vanoli, L ^a   von Spakovsky, M R ^b  

^a UNIVERSITY OF NAPLES FEDERICO II   (Italy)

^b State University   (United States)

Author keywords

Exergy; Optimization; Simulation; Solid oxide fuel cell; Thermoeconomics

Indexed keywords

COMPRESSORS; COMPUTER SIMULATION; FLOW OF FLUIDS; MATHEMATICAL MODELS; OPTIMIZATION; POLARIZATION; SOLID OXIDE FUEL CELLS; SYNTHESIS (CHEMICAL);

BULK-FLOW MODELS; CENTRIFUGAL COMPRESSORS; RADIAL TURBINES; THERMOECONOMICS;

GAS TURBINE POWER PLANTS;

EID: 33748045819     PISSN: 03787753     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jpowsour.2005.11.108     Document Type: Article

References (51)

1. Singhal S.C., and Kendall K. High Temperature Solid Oxide Fuel Cells (2003), Elsevier
2. Larminie J., and Dicks A. Fuel Cell System Explained (2004), John Wiley and Sons Ltd.
3. Benjamin T.G., Camera E.H., and Marianowski L.G. Handbook of Fuel Cell Performance (1995), Institute of Gas Technology
4. Fuel Cell Handbook. 6th ed. (2002), U.S. Department of Energy
5. Fuel Cell Technology Handbook (2002), Gregors Hoogers/CRC Press/SAE International Hardbound
6. Palsson J., Selimovic A., and Sjunnesson L. Combined solid oxide fuel cell and gas turbine systems for efficient power and heat generation. J. Power Sources 86 (2000) 442-448
7. Kimijima S., and Kasagi N. Performance evaluation of gas turbine-fuel cell hybrid micro generation system. Proceedings of ASMETURBO EXPO 2002. June 3-6, Amsterdam, The Netherlands (2002)
8. Bae B.H., Sohn J.L., and Ro S.T. Thermodynamic modeling and performance analysis of a power generation system based on the solid oxide fuel cell. Proceedings of ASME Conference on Fuel Cell Science, Engineering and Technology. April 21-23, Rochester, NY, USA (2003)
9. Inui Y., Yanagisawa S., and Ispida T. Proposal of high performance SOFC combined power generation system with carbon dioxide recovery. Energy Convers. Manage. 44 (2003) 597-609
10. Campanari, S., Power plants based on solid oxide fuel cells combined with gas turbine cycles, Ph.D. Dissertation, Politecnico di Milano, Milano, 1998.
11. Bedringas K.W., and Ertesvag I.S. Exergy analysis of solid oxide fuel cell systems. Energy: Int. J. 22 (1997) 403-412
12. Dunbar W.R., Lior N., and Gaggioli R. Combining fuel cells with fuel-fired power plants for improved exergy efficiency. Energy: Int. J. 16 10 (1991) 1259-1274
13. Dunbar W.R., Lior N., and Gaggioli R. The effect of the fuel-cell unit size on the efficiency of a fuel-cell-topped Rankine Cycle. ASME J. Energy Resour. Technol. 115 (1993) 105-107
14. Chan S.H., Low C.F., and Ding O.L. Energy and exergy analysis of a simple solid-oxide fuel cell power system. J. Power Sources 103 (2002) 188-200
15. Calise F., Dentice d'Accadia M., Palombo A., and Vanoli L. Simulation and exergy analysis of a hybrid SOFC-gas turbine system, part I: description of the model. Proceedings of the 17th International Conference on Efficiency. Costs. Optimization. Simulation and Environmental Impact of Energy and Process Systems. Gunajuato, Mexico, July 7-9 (2004)
16. Calise F., Dentice d'Accadia M., Palombo A., and Vanoli L. Simulation and exergy analysis of a hybrid SOFC-gas turbine system, part II: results and discussion. Proceedings of the 17th International Conference on Efficiency. Costs. Optimization. Simulation and Environmental Impact of Energy and Process Systems. Gunajuato, Mexico, July 7-9 (2004)
17. Calise F., Dentice d'Accadia M., Palombo A., Vanoli L., and Vanoli R. Modelling, simulation and exergy analysis of a hybrid SOFC-gas turbine system. Proceedings of the Third International Symposium on Energy and Environment. Sorrento, 30 September-2 October (2004)
18. Muñoz J.R., and von Spakovsky M.R. The use of decomposition approach for the large scale synthesis/design optimization of highly coupled, highly dynamic energy systems. Int. J. Appl. Thermodyn. 4 1 (2001)
19. Frangopoulos C.A., von Spakovsky M.R., and Sciubba E. A brief review of methods for the design and synthesis optimization of energy systems. ICAT, vol. 5, no.4. Istanbul, Turkey, December. Int. J. Appl. Thermodyn. (2002)
20. Rancruel D.F., and von Spakovsky M.R. Decomposition with thermoecono-mic isolation applied to the optimal synthesis/design of an advanced fighter aircraft system. ICAT, vol. 6, no. 3. Istanbul, Turkey, September. Int. J. Thermodyn. (2003)
21. N. Georgopoulos, Application of a decomposition strategy to the optimal synthesis/design and operation of a fuel cell based total energy system, M.S. thesis, advisor: M. R. von Spakovsky, Virginia Polytechnic Institute and State University, Blacksburg, VA, 2001.
22. B. Oyarzabal, Application of a decomposition strategy to the optimal synthesis/design of a fuel cell sub-system, M.S. thesis, advisor: M.R. von Spakovsky, Virginia Polytechnic Institute and State University, Blacksburg, VA, 2001.
23. D.F. Rancruel, Dynamic synthesis/design and operational/control optimization approach applied to a solid oxide fuel cell based auxiliary power unit under transient conditions, Ph.D. Dissertation, Advisor: M.R. von Spakovsky, Virginia Polytechnic Institute and State University, Blacksburg, VA, 2005.
24. D.F. Rancruel, M.R. von Spakovsky, Development and application of a dynamic decomposition strategy for the optimal synthesis/design and operational/control of a SOFC based APU under transient conditions, Proceedings of the International Mechanical Engineering Congress and Exposition-IMECE'2005, ASME Paper No. 82986, New York, NY, November, 2005.
25. http://www.fuelcells.org
26. Costamagna P., Magistri L., and Massardo A.F. Design and part-load performance of a hybrid system based on a solid oxide fuel cell reactor and a micro gas turbine. J. Power Sources 96 (2001) 352-368
27. Campanari S. Carbon dioxide separation from high temperature power plants. J. Power Sources 112 (2002) 273-289
28. Campanari S. Full load and part load performance prediction for integrated SOFC and microturbine systems. J. Power Sources 96 (2001) 352-368
29. Campanari S. Thermodynamic model and parametric analysis of a tubular SOFC module. J. Power Sources 92 (2001) 26-34
30. MOOLENI Geneticalgorithm Software. LENI, Ecole Polytechnique Federate de Lausanne, Lausanne, Switzerland, 2004.
31. Bellavia S., Macconi M., and Morini B. An affine scaling trust region method approach to bound-constrained nonlinear systems. Appl. Numer. Math. 44 (2003) 257-280
32. S. Bellavia, M. Macconi, B. Morini, STRSCNE: a scaled trust region solver for constrained nonlinear equations, Technical Report, 2002.
33. http://www.iapws.org/newform.htm
34. Chemical Properties Handbook (1999), McGraw Hill pp. 531-556
35. Singhal S.C. Recent progress in tubular solid oxide fuel cell technology. Proceedings of the Fifth International Symposium on Solid Oxide Fuel Cells (1997)
36. Giyftopoulos E.P., and Beretta G.P. Thermodynamics: Foundations and Applications (1991), Macmillan, New York
37. Marechal F., Favrat D., Palazzi F., and Godat J. Thermoeconomic modeling and optimization of fuel cell systems. Proceedings of the Fuel Cell Research Symposium. ETH Zrich, March (2004)
38. Chan S.H., Ho H.K., and Tian Y. Modeling for part load operation of solid oxide fuel cell-gas turbine hybrid power plant. J. Power Sources 114 (2003) 213-227
39. Zanfir M., and Gavrilidis A. Catalytic combustion assisted methane steam reforming in a catalytic plate reactor. Chem. Eng. Sci. 58 (2003) 3947-3960
40. Gallucci F., Paturzo L., and Basile A. A simulation study of the steam reforming of methane in a dense tubular membrane reactor. Int. J. Hydrogen Energy 29 (2004) 611-617
41. Xu J., and Froment G.F. Methane-steam reforming: methanation and water-gas shift. I. Intrinsic kinetics. AlXhE J. (1989)
42. D.F. Rancruel, M.R. von Spakovsky, Investigation of the control strategy development using an integrated model of a SOFC based APU under transient conditions, Proceedings of the International Mechanical Engineering Congress and Exposition-IMECE'2004, ASME Paper No. 62372, New York, NY, November, 2004.
43. Kakac S., and Liu H. Heat Exchanger Selection, Rating, and Thermal Design (1998), CRC Press, Boca Raton, FL
44. Kays W.M., and London A.L. Compact Heat Exchangers. 3rd ed. (1998), Krieger Publishing Company, Florida
45. D.F. Rancruel, A decomposition strategy based on thermoeconomic isolation applied to the optimal synthesis/design and operation of an advanced fighter aircraft system, M.S. Thesis, Advisor: M.R. von Spakovsky, Virginia Polytechnic Institute and State University, Blacksburg, VA, 2003.
46. J.R. Muñoz, Optimization strategies for the synthesis/design of highly coupled, highly dynamic energy systems, Ph.D. Dissertation, Advisor: M.R. von Spakovsky, Virginia Polytechnic Institute and State University, Blacksburg, VA, 2000.
47. Traverso, A., Massardo, A., Logorio, G., Cazzola, W., 2004. WIDGET-TEMP: a novel web-based approach for thermoeco-nomic analysis and optimization of conventional and innovative cycles, ASME Paper 2004-GT-54115, New York, NY.
48. 2 from coal using commercially-ready technology. Proceedings of the Second Annual Conference on Carbon Sequestration. Washington, May 5-8 (2003)
49. http://www.matche.com
50. Bohem R.F. Design Analysis of Thermal Systems (1987), John Wiley and Sons
51. T.P. Chen, J.D. Wright, K. Krist, SOFC system analysis, GRI study.