A review of mechanical and chemical properties of shredded tires and soil mixtures

Geotechnical Special Publication

Volumn , Issue 127, 2004, Pages 1-21

  Edil, Tuncer B ^a  

^a UNIVERSITY OF WISCONSIN MADISON   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSION TESTING; EMBANKMENTS; FRICTION; LIGHT WEIGHT BUILDING MATERIALS; REINFORCEMENT; SHEAR STRENGTH; SOILS; SORPTION; TIRES; VOLATILE ORGANIC COMPOUNDS;

FRICTION ANGLE; GEOMATERIALS; SHREDDED TIRES; TRIAXIAL COMPRESSION TESTS;

MIXTURES;

EID: 33747884005     PISSN: 08950563     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1061/40756(149)1     Document Type: Conference Paper

References (38)

1. Abichou, T., Edil, T.B., Benson, C.H. and Berilgen, M. (2003). "Mass behavior of soil-tire chip backfill." Beneficial Use of Recycled Materials in Transportation Applications, Air and Waste Management Association, Sewickley, Pennsylvania, 689-698.
2. Abichou, T., Tawfiq, K., Edil, T.B., Benson, C.H. (2004). "Behavior of a soil-tire chip backfill for modular block wall." Use of Recycled Materials in Geotechnics, ASCE, Geotechnical Special Publication, Baltimore, MD.
3. Ahmed, I. and Lowell, C. (1993). "Use of rubber tires in highway construction." Utilization of Waste Materials in Civil Engineering Construction, ASCE, New York, NY, 166-181.
4. Bergado, T. and Chai, J. (1994). "Pull-out force/displacement relationship of extensible grid reinforcements," Geotextiles and Geomembranes, No. 13, 295-316.
5. Bemal, A., Salgado, R., Swan, R., and Lovell, C. (1997). "Interaction between tire shreds, rubber-sand, and geosynthetics." Geosynthetics International, 4(6), 623-643.
6. Bosscher, P.J., Edil, T.B. and Eldin, N. (1993). "Construction and performance of shredded waste tire embankment." Transportation Research Record, No. 1345, Washington, D.C., 44-52.
7. Bosscher, P.J., Edil, T.B., and Kuraoka, S. (1997). "Design of highway embankments using tire chips." J. Geotech. and Geoenviron. Engrg., ASCE, 123 (4), 295-304.
8. Edil, T. B. (2003). "A review of aqueous phase VOC transport in modern landfill liners." Waste Management, 23, 561-571.
9. Edil, T. B. (2002). "Mechanical properties and mass behavior of shredded tire-soil mixtures." Proceedings of the International Workshop on Lightweight Geo-Materials (IW-LGM2002), Tokyo, Japan, 17-32.
10. Edil, T.B. and Bosscher, P.J. (1992). "Development of engineering criteria for shredded waste tires in highway applications." Final Report, Research Project WI 14-92, Wisconsin Department of Transportation, Madison, Wisconsin.
11. Edil, T.B. and Bosscher, P.J. (1994). "Engineering properties of tire chips and soil mixtures." Geotech. Testing J., ASTM, 17 (4), 453-464.
12. th Annual Madison Waste Conference, 49-61.
13. Edil, T.B., Park, J.K., and Kim, J.Y. (2004). "Effectiveness of scrap tire chips as sorptive drainage material, J. Environ. Engrg., ASCE, in press.
14. Foose, G., Benson, C.H., and Bosscher, P.J., (1996). "Sand reinforced with shredded waste tires." J. Geotech. Engrng, ASCE, 122 (9), 760-767.
15. Foose, G. J., Benson, C. H., and Edil, T. B. (2002). "Comparison of solute transport in three composite liners." J. Geotech. and Geoenviron. Engrg., ASCE, 128(5), 391-403
16. th Annual Madison Waste Conference, Madison, WI, 251-276.
17. Grefe, R. (1989). "Review of waste characterization of shredded tires," Interdepartmental Memorandum, Wisconsin Department of Natural Resources, Madison, Wisconsin.
18. Humphrey, D.N. (1996). "Investigation of exothermic reaction in tire shred fill located on SR 100 in Ilwaco, Washington." Report to Federal Highway Administration.
19. Humphrey, D.N. and Katz, L.E. (1995). "Water quality testing for Dingley road tire chip test project." Report for Town of Richmond, Maine, Department of Civil and Environmental Engineering, University of Maine, Orono, Maine.
20. Humphrey, D.N., Katz, L.E. and Blumenthal, M. (1997). "Water quality effects of tire chip fills placed above the groundwater table." Testing Soil Mixed with Waste or Recycled Materials, Wasemiller, M.A.& Hoddinott, K.B. (Eds.), ASTM STP 1275, West Conshohocken, PA., 299-313.
21. Humphrey, D.N. and Sandford, T. (1993). "Tire chips as lightweight subgrade fill and retaining wall backfill." Proc. Symp. on Recovery and Effective Reuse of Discarded Materials and By-Products for Construction of Highway Facilities, Federal Highway Administration, 5.55-5.68.
22. Kim, J. Y., Park, J. K., and Edil, T. B. (1997). "Sorption of organic compounds in the aqueous phase onto tire rubber." J. Environ. Engrg., ASCE, 123(9): 827-835.
23. Lee J.H., Salgado R, Bernal A, Lovell C.W. (1999). "Shredded tires and rubber-sand as lightweight backfill." J. Geotech. and Geoenviron. Engrg., ASCE, 125 (2), 132-141.
24. Miller, W.L. and Chadik, P.A. (1993). "A study of waste tire leachability in potential disposal and usage environments." Amended Final Report to Florida Department of Environmental Regulation No. SW67.
25. Minnesota Pollution Control Agency (1990). "Environmental study of the use of shredded waste tires for roadway sub-grade support." Report, Twin City Testing Corporation.
26. Park, J. K., Kim, J. Y, Edil, T. B. (1996). "Mitigation of organic compound movement in landfills by shredded tires." Water Environment Research, 68 (1), 4-10.
27. Park, J.K., Kim, J.Y., Edil, T.B., Huh, M., Lee, S.H., and Lee, J.J. (2003). "Suitability of shredded tires as a substitute for a landfill leachate collection medium." Waste Management and Research, 21(3), 278-289.
28. Rowe, R. K., Hrapovic, L., and Kosaric, N. (1995). "Diffusion of chloride and dichloromethane through an HDPE geomembrane." Geosynthetics International, 2(3), 507-536.
29. Rubber Manufacturers Association (1990). "RMA Leachate Study." Report, Radian Corporation, Washington DC.
30. Rubber Manufacturers Association (2002a). "U.S. Scrap Tire Markets 2001." Report MAR-021, Washington DC.
31. Rubber Manufacturers Association (2002b). "RMA TCLP Assessment Project." Report LEA-006, Washington DC.
32. Tatlisoz, N., Benson, C.H., and Edil, T.B. (1997). "Effect of fines on mechanical properties of soil-tire chip mixtures." Testing Soil Mixed with Waste or Recycled Materials, Wasemiller, M.A.& Hoddinott, K.B. (Eds.), ASTM STP 1275, West Conshohocken, 93-108.
33. Tatlisoz, N., Edil, T.B. and Benson, C.H. (1998). "Interaction between reinforcing geosynthetics and soil-tire chip mixtures." J. Geotech, and Geoenviron. Engrg., ASCE, Vol. 124, No. 11, 1109-1119.
34. Tatlisoz, N., Edil, T.B., Benson, C.H., Park, J.K. and Kim, J.Y. (1996). "Review of environmental suitability of scrap tires." Environmental Geotechnics Report No. 96-7, Department of Civil and Environmental Engineering, University of Wisconsin-Madison.
35. Vashisth, P., Wayne Lee, K., and Wright, R. M. (1998). "Assessment of water pollutants from asphalt pavement containing Recycled Rubber in Rhode Island." Environmental and Social Effects of Transportation, Transportation Research Record 1626, National Academy Press, Washington D.C.
36. Wu, W., Benda, C., and Cauley, R. (1997). "Triaxial determination of shear strength of tire chips." J. Geotech. and Geoenviron. Engrg., ASCE, 123 (5), 479-482.
37. Zomberg, J. G., Cabral, A.R. and Viratjandr, C. (2004a). "Behavior of tire shred-sand mixtures," Canadian Geotech. J., 41, 227-241.
38. rd Annual Meeting, Paper No. 04-4915, Washington, D.C.